Line cut midway

[10b14224cc]

In case of a bend that goes up and down, the line is cut mid-way (only visual artifact, sound is not affected):

[guiv42]

(edited, my first answer was incorrect). What you show on your screenshot is the intended behavior

Your "global" bend movement is split over 2 different tied notes. So, each note has its own independent bend. If you want to show some continuity between these 2 parts, I can propose you to split your first half into 2 tied notes: the first one with a standard bend, the second one with a "hold" (i.e. pre-bend, maintained during the whole note duration). Then you have to choose how to split the half, to consider the speed of your first bend.

Example with half note split into eighth plus dotted quarter: in compact mode (view/Compact checked)

with "Compact" unchecked:

[10b14224cc]

ok this is how I see it without compact mode

(there is no dotted line on the tab tough)

thanks

[guiv42]

there is no dotted line on the tab tough

It's normal. On your tablature, the bend movement is split in 2 tied notes:

• one half, bend
• one sixteenth, pre-bend + release

To show explicitly the dotted line, see my screenshot: I have split the bend movement in 3 tied notes:

• one eighth: bend
• one dotted quarter, hold: start note with an already bent string, and hold the bend until the end of the note. This displays the dotted line
• one sixteenth, pre-bend + release