search

helloSystem / ISO

helloSystem Live and installation ISO
https://github.com/helloSystem/
BSD 3-Clause "New" or "Revised" License
805 stars 58 forks source link

Booting stops when RF switch is off #394

Open OspreyJr opened 1 year ago

OspreyJr commented 1 year ago

On installed helloSystem 0.8.0 experimental booting stops when RF switch is set to off on Lenovo T520. It can reacts to Ctrl-Alt-Del and shuts down and reboots.

Booting stops at the position where RF switch state is being read.

probonopd commented 1 year ago

What happens when you boot with the RF switch set to on until you can see the desktop. Then set the RF switch to off.

Does the device reboot? Immediate reboot or black/grey screen first?

OspreyJr commented 1 year ago

When booting with the RF switch set to on until you can see the desktop, then setting the RF switch to off is followed by the kernel message "radio disabled". The system then continues to work properly.

probonopd commented 1 year ago

Do you see the same behavior with GhostBSD?

OspreyJr commented 1 year ago

GhostBSD was booting ok.

probonopd commented 1 year ago

That is very interesting. I wonder what causes the difference between the two systems.