Use Nvidia 390 driver for Nvidia FTX 570

[n0bzeR]

im just now have video card nvidia gtx 570, and wi-fi : rtl8192eu this adapter not connect to any network ; ( im typing password, press connect, and.. nothing...

can you add driver 390 for nvidia graphic card in that iso ? just want use 3d acceleration for better expirence...

now driver bad performence.. possibly add that driver in .iso ?

for my card, 390 - latest supported driver, from official nvidia

[probonopd]

Isn't Nvidia 390 already being shipped in 0.8.0? It should:

https://github.com/helloSystem/ISO/blob/60f672ef5ee3aaec8908c31dd22ef095cea27996/build.sh#L319-L329

Please do a Hardware Probe and post the URL. Thanks.

[probonopd]

Regarding the WLAN, please let's discuss this in https://github.com/helloSystem/ISO/issues/416. Did you try the solution from https://github.com/helloSystem/ISO/issues/384. Does it work for you? I don't have this kind of hardware to test with.

[probonopd]

@n0bzeR which helloSystem build are you using?

[n0bzeR]

@n0bzeR which helloSystem build are you using?

version 0.8.0_0H284-FreeBSD-13.1 where i can find nvidia-390 settings, if that installed in that version ? o.O im not ses any nvidia in terminal.. you really installed driver, from official nvidia site ? or its... like nouveau in linux (open source driver) or for BSD, no need apps like for linux? nvidia-390xx-settings nvidia-smi nvidia-xconfig ?

I can't figure out why I can't connect to the network even though I enter the correct password signal, in the network diagram, shows good I enter the password, and wait for 2 minutes, then it writes to me, well, I was able to connect that adapter work in mac os catalina, linux, and windows...

maybe something else needs to be done? I wrote some commands in the terminal, according to the guides on YouTube the terminal says to me, perhaps the DHCP service is not running? and yet, while the distribution is being loaded, I saw this line there: wlan0 not link (i seed that on boot OS)

i just installed that os, connected USB 2.0 rtl8192eu, and in network, pick my wifi, and enter pass but... not connected.. after 2 mins...

i just added that in configs: /etc/rc.conf wlans_rtwn0="wlan0" ifconfig_wlan0="WPA SYNCDHCP"

/etc/wpa_supplicant.conf network={ ssid="hi1" psk="12345678a" }

[n0bzeR]

@n0bzeR which helloSystem build are you using?

okay , no need help with GPU driver i just installed on virtual box, and in virtual box installed 390 driver nvidia + xconfig + settings and after, just unpack virtual box on my hard disk.

but, I DONT KNOW HOW fix network =-= realtek rtl8192eu not connect to wifi! =-= not know why! i see networkds. enter password... nothing.... windows. linux. mac os. - all work. your freebsd - not connect to wifi. (13.1 -14.0)

[probonopd]

Please:

• Write proper English sentences
• Open a separete GitHub issue for each problem
• Close issues if they are no longer an issue

This is a bug tracker and not a support channel. Thanks for your understanding.

[probonopd]

"okay , no need help with GPU driver"; I am assuming this can be closed then.