Open sajem2020 opened 3 years ago
From the logs attached above you can see that each component says its successfully attached. All are diameter connections
thank you for helping for me. I have run volte ims with open5gs core and set the Access point name to "ims", but my phone dosn't attach to network and with Access point name "internet" , my phone has been attached to 4G internet. this is my wireshark log for ims and internet.
wireshark_ims.zip wireshark_internet.zip this is my sim card information. MCC/MNC : 310/789 IMSI : 310789012345301 K : 82E9053A1882085FF2C020359938DAE9 OPc : BFD5771AAF4F6728E9BC6EF2C2533BDB this is my srsenb log: enb_ims.zip pcrfd.zip smfd.zip and hssd.zip icscf.zip pcscf.zip scscf.zip
I have replaced OPc with OP. is it my problem?
your UE does not have IMS enabled/activated, that is the reason you dont see PDNConnectivityRequest for ims APN
thanks a lot, I have an UE that support volte and volte is automaticly active on UE but there is'nt tap to enable VoLTE. could you help me, how can I install UE simulator. excuse me, thank you
I have no idea what you mean by UE simulator.
Sorry to bother you, I want to install a UE with repositoy that suport 4G, for example UERANSIM that suport 5G. Are there any repos ?
you can try srsLTE UE but don't expect to have VoLTE working with it as it does not support it
Hi herlesupreeth, Sorry to bother you, I borrowed a UE that support VoLTE and has an activation tab for VoLTE, but when I put customize sim card on that UE, there is'nt VoLTE activation tab, while the volte and ims network runs on my laptop and UE attaches to that network. this is my sim card information. MCC/MNC : 310/789 IMSI : 310789012345301 K : 82E9053A1882085FF2C020359938DAE9 OPc : BFD5771AAF4F6728E9BC6EF2C2533BDB could you tell me, what is the problem ? please AS I show above, my network runs without any errores.!! thank you a lot.
Its a UE issue. If you are using Sysmocom USIM/ISIM then I would suggest following this guide to enable VoLTE using carrier privileges (https://github.com/herlesupreeth/CoIMS_Wiki)
I have run Kamailio with open5gs and srsend with these repos but I could not khow it is running ok or not, please help me
my output are here
hss.zip icscf.zip pcrf.zip pcscf.zip scscf.zip