Hello everyone. I would like to run srsRAN on LimeSDR v1.4s using LimeRFE amplifier. How to do it?
I use this documentation. When I use LimeSuite GUI, following the instructions, the ports open.
LimeSDR
```
INFO: Disconnected control port
INFO: Reference clock 30.72 MHz
INFO: Connected Control port: LimeSDR-USB FW:4 HW:4 Protocol:1 GW:2.23 Ref Clk: 30.72 MHz
```
LimeRFE
```
Port opened
Firmware version: 1
Hardware version: 0x10
```
But since the device is already busy, I can not be able to connect srsRAN.
srsRAN
```
[ERROR] Cannot claim interface - Resource busy
[ERROR] Failed to open device
[ERROR] connection is not open
[ERROR] TransferPacket: Write failed (ret=0)
[ERROR] connection is not open
[ERROR] TransferPacket: Write failed (ret=0)
[ERROR] Failed to open. Device is busy.
Failed to create Soapy object
Error initializing radio.
```
Issue Description
Hello everyone. I would like to run srsRAN on LimeSDR v1.4s using LimeRFE amplifier. How to do it? I use this documentation. When I use LimeSuite GUI, following the instructions, the ports open.
LimeSDR
``` INFO: Disconnected control port INFO: Reference clock 30.72 MHz INFO: Connected Control port: LimeSDR-USB FW:4 HW:4 Protocol:1 GW:2.23 Ref Clk: 30.72 MHz ```LimeRFE
``` Port opened Firmware version: 1 Hardware version: 0x10 ```But since the device is already busy, I can not be able to connect srsRAN.
srsRAN
``` [ERROR] Cannot claim interface - Resource busy [ERROR] Failed to open device [ERROR] connection is not open [ERROR] TransferPacket: Write failed (ret=0) [ERROR] connection is not open [ERROR] TransferPacket: Write failed (ret=0) [ERROR] Failed to open. Device is busy. Failed to create Soapy object Error initializing radio. ```Technology stack
Ubuntu 22.04 (Intel® Core™ i7-7700 CPU @ 3.60GHz × 8) srsRAN 22.04 (open5gs) LimeSDR v1.4s (LimeSuite v20.10.0, SoapySDR 0.7.2) LimeRFE 1v31