Problems with DFPlayer.

[micko-24]

DFplayer in version 4.0-4.2 does not work well. It keeps turning off when you click on the melody, and when it works, it turns on at any time, regardless of whether it is turned off in the settings. The LCD sometimes goes to sleep for no reason (v4.0 -4.20).In older versions, DFplayer works normally without errors.

[himikat123]

Thank you, I'm trying to reproduce your problems, but everything works with any of my settings. Maybe you can send me your config file (without passwords of course)

[micko-24]

config.json

[himikat123]

Try the new firmware, everything seems to be fixed. Note that the dfplayer connection diagram has been changed. It turned out that the player works unstably if there are debug data at the uart input so I had to connect it to another output, as it was before. And the esp32 gpio36 input has a hardware error, interrupts do not work correctly on it, so I will now use gpio18 instead

[micko-24]

Thank you, now everything works stably. Can you help me make a 3D box for the version of the BIM weather monitor ESP8266 (I had it made, and the manufacturer gave me this message - Please note that there are more than one shell and they cannot be unified automatically. Sorry to tell you that each file can only support 1 shell. Could you please unify the parts into one unit? Or how about separating the several shells into several files to proceed the orders separately , we will activate the 'replace file' button for you.

[himikat123]

Perhaps you sent him all the 3d box files at once. But there is a separate folder for each part, where there is a file for printing in one color and a folder with files for printing in two colors. You just need to decide whether you are printing in one color or two and delete unnecessary files

[micko-24]

[micko-24]

Dear Sir, I sent another order for 3d printing and got this reply.

But truly sorry that the issues are still existing as follows:

1,the wall thickness of those indicated red area is too thin, which has high risks of loss, deformation ,crack, or damage during the printing process.

Could you please confirm if the risks are acceptable for you?

If not, could you please kindly increase it to be at least 0.8 mm to proceed? 1.5 mm will be better .Then we will activate the ' replace file' button for you.

2,kindly please note that there are more than one shell and they can not be unified automatically. Sorry to tell you that each file can only support 1 shell (1 model) print.Could you please unify the parts and combine them into one unit?  Or how about separating the several shells into several files to proceed the orders separately.To save time,we will activate the 'replace file' button for you. Can you help me with this problem.(BIM weather monitor ESP8266)

Thanks.

[himikat123]

Hi, please answer me the questions, will you print in one color or two? Who do you order 3D printing from?

[micko-24]

I will work in one color. I am ordering from JLCPCB.I did the first versions of bim32 and everything was fine.

[himikat123]

try this files STL.zip

[micko-24]

Dear Sir, all files are ok, except reset_btn.stl and settings_btn.stl. The manufacturer reports this error. Order Reviewed: 2024-09-13 04:22:36 Audit failure reason:

Multiple parts are detected in your file, sorry to tell you that each file could only support 1 part for printing, if all the separated parts intended to be integrated, please kindly unify all the separate parts in one to proceed. Thanks!

Can it be corrected or simply fill in the places where the buttons are located (face.stl). Thanks.

[himikat123]

I have remade these files, try these set_res.zip

[micko-24]

Dear Sir, can you edit this file for me so that it doesn't have keyholes. Thanks. face.zip

[himikat123]

Try it face.zip

[micko-24]

I need this version number 2.

[micko-24]

[himikat123]

ah, i misunderstood, here it is face2.zip

[micko-24]

Dear Sir, I just received an email from the manufacturer asking for the wall thickness marked in red in the picture to be increased to at least 0.8mm, and the recommended 1.5mm. Thanks. face2.zip

[himikat123]

Hi micko-24

what a strict manufacturer :)

Here is a new file face3.zip