Yeelight Not Working Since 2023.10 release

[ifflanb]

The problem

The Yeelight integration has not worked since the 2023.10 release. The integration won't load.

What version of Home Assistant Core has the issue?

2023.10

What was the last working version of Home Assistant Core?

2023.9

What type of installation are you running?

Home Assistant OS

Integration causing the issue

Yeelight

Link to integration documentation on our website

No response

Diagnostics information

No response

Example YAML snippet

No response

Anything in the logs that might be useful for us?

No response

Additional information

No response

[ifflanb]

Logger: homeassistant.config_entries Source: config_entries.py:441 First occurred: 10:05:17 AM (1 occurrences) Last logged: 10:05:17 AM

Config entry 'Strip6 0x19fea796' for yeelight integration not ready yet: Could not fetch initial state; try power cycling the device; Retrying in background

[achmetinternet]

I had all lamps connected but one which consistently fails. First generation E25 lightbulb. Where can I find the logs?

[home-assistant[bot]]

Hey there @zewelor, @shenxn, @starkillerog, @alexyao2015, mind taking a look at this issue as it has been labeled with an integration (yeelight) you are listed as a code owner for? Thanks!

Code owner commands

Code owners of `yeelight` can trigger bot actions by commenting: - `@home-assistant close` Closes the issue. - `@home-assistant rename Awesome new title` Renames the issue. - `@home-assistant reopen` Reopen the issue. - `@home-assistant unassign yeelight` Removes the current integration label and assignees on the issue, add the integration domain after the command.

_{^{(message by CodeOwnersMention)}}

---

yeelight documentation yeelight source _{^{(message by IssueLinks)}}

[pepe59]

Here the integration works, but poorly. I have the strip from Yeelight and only use the switch. The LED strip can be turned on and off instantly, but cannot be turned on again. Waits 15 seconds. During this time, its state will not change, even if it is physically turned off.

[ifflanb]

Mine is a Yeelight strip 6 and doesn't work at all. The integration won't load.

[pejotigrek]

in 2023.10.1 it worked fine, I skipped 2023.10.2 and after installing 2023.10.3 yeelight integration stopped working. [if it helps: the same with xiaomi_miio - maybe it's somehow related?]

I use HA container installation btw.

[ifflanb]

Anyone looking at this or anyone know of an alternate integration? thanks

[ifflanb]

Changed to use Mi Home and the Xiaomi Miot integration which works fine.

[Lemonadel]

Well… it’s still broken. In my case Meteorite Pendant lamp YLDL01YL (ceiling10) could not be set up (even when added it again) and work anymore - “Failed setup, will retry”. Xiaomi > Xiaomi Miio Integration does not work with this device… (does not know it even so it’s Gen1) so I am left with only Xiaomi app…

So either they changed something around authorization or something deeper in HA broke it…

Edit: I was blind or something - works with Miot Integration mentioned post before

[Vespel]

Sama there, Not working anymore.. fix? i have no xiaomi etc.

[Lemonadel]

Sama there, Not working anymore.. fix? i have no xiaomi etc.

Check this (personally I downloaded it via HACS): https://github.com/al-one/hass-xiaomi-miot

[issue-triage-workflows[bot]]

There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.

[bassguitarist]

Well… it’s still broken. In my case Meteorite Pendant lamp YLDL01YL (ceiling10) could not be set up (even when added it again) and work anymore - “Failed setup, will retry”. Xiaomi > Xiaomi Miio Integration does not work with this device… (does not know it even so it’s Gen1) so I am left with only Xiaomi app…

So either they changed something around authorization or something deeper in HA broke it…

Edit: I was blind or something - works with Miot Integration mentioned post before

Hello. I'm experiencing the very same problem: ceiling10 (Meteroite Pendant) not working with Yeelight intergration, while it is working with the HASS Miot integration. However, the latter is not as responsive as the Yeelight integration and color selection is not correct.

Did you success to reconfigure the ceiling10 with the official Yeelight integration?

[pepe59]

Yes, the problem still persists.

[PotatoYummy]

+1

[alexyao2015]

Have you all tried power cycling the device, ensuring lan control is enabled in the yeelight app, and reloading the integration?

[bassguitarist]

Have you all tried power cycling the device, ensuring lan control is enabled in the yeelight app, and reloading the integration?

Hi @alexyao2015. THANK YOU for this advice: I just branched off my ceiling from the AC, waited some time, rebranched the power wire, and... the integration restarted working as usual.

However it seems strange to me that everything was working with the Yeelight app, as well as with the HACS Miot integration (configured after the problem with the Yeelight one occurred).

All is good what ends good. Thanks

[DenkiStuff]

Not sure if my recent issue is related, but it sure feels like it. Seemingly at the same time, all of my Yeelights stopped working. In the Yeelight App, they were all online and responsive. Yet HA was reporting as unresponsive. I had to physically power cycle all my bulbs. After 30 seconds or so, they all started working in HA assistant again.

Needing to power cycle the bulbs to restore HA connectivity is a pain. The Yeelight app does not seem to have any issue, so I feel this is an issue with the integration. Please let me know what kinds of logs I can pull that might help diagnose this issue.

[Orneeman]

Not sure if my recent issue is related, but it sure feels like it. Seemingly at the same time, all of my Yeelights stopped working. In the Yeelight App, they were all online and responsive. Yet HA was reporting as unresponsive. I had to physically power cycle all my bulbs. After 30 seconds or so, they all started working in HA assistant again.

Needing to power cycle the bulbs to restore HA connectivity is a pain. The Yeelight app does not seem to have any issue, so I feel this is an issue with the integration. Please let me know what kinds of logs I can pull that might help diagnose this issue.

+1

[TDCroPower]

Sama there, Not working anymore.. fix? i have no xiaomi etc.

Check this (personally I downloaded it via HACS): https://github.com/al-one/hass-xiaomi-miot

How did you implement the control in your automation with the HACS miot integration? You have to use there own services there, don't you? Unfortunately, they are not described in great detail. I have successfully switched on the lamp with the following service, but the entity does not change! Do I have to start any other service afterwards?

service: xiaomi_miot.send_command data: entity_id: light.yeelink_ceiling4_0ca5_main_light params: "on" method: set_power

[issue-triage-workflows[bot]]

There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.