Closed MatteoManzoni closed 4 months ago
Hey there @elupus, mind taking a look at this issue as it has been labeled with an integration (nibe_heatpump
) you are listed as a code owner for? Thanks!
(message by CodeOwnersMention)
nibe_heatpump documentation nibe_heatpump source (message by IssueLinks)
They might have changed the senors. Could you export your modbus data from the pump?
Even rolling back to 2.21.12 didn't fix the issue, I re-installed 2.22.6 and dumped all the addresses, attached here modbus_addresses_all_20231107-06765422096045-1.csv
There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.
The problem
After upgrading my SMO S40 to 2.22.6 the entity (
sensor.current_be1_30051
) exposing the first (and only in my setup) toroidal current sensor went unavailable. Searching through the logs I wasn't able to find much regarding the issue, the only two suspicious entries related with the integration were:Some coils failed to update, and may be unsupported: Failed to read some or all coils (Error 'Function code is not an allowable action for the server.' reading roomsensor-1-1-30027 starting: 26 count: 1 from: 0, Error 'Function code is not an allowable action for the server.' reading current-be1-30051 starting: 50 count: 2 from: 0)
Skipping climate: s<2,3,4> due to Coil with address 30024 not found
homeassistant.exceptions.HomeAssistantError: Entity sensor.current_be1_30051 async_remove called twice
What version of Home Assistant Core has the issue?
core-2023.11.1
What was the last working version of Home Assistant Core?
core-2023.11.1
What type of installation are you running?
Home Assistant OS
Integration causing the issue
nibe_heatpump
Link to integration documentation on our website
https://www.home-assistant.io/integrations/nibe_heatpump
Diagnostics information
No response
Example YAML snippet
No response
Anything in the logs that might be useful for us?
No response
Additional information
No response