Open tmjo opened 6 months ago
My two integrations that has this problems: norwegianweather and norwegiantide. It was initially raised by author of another custom integration here which was closed as everyone thought it was ok with HA 2024.2.3 but later reports came in that is doesn't work.
Can confirm that the errors mentioned for the tibber_custom integration also occur using a RPI4 with HAOS image
Thanks for creating this ticket !
Can confirm that the errors mentioned for the tibber_custom integration also occur using a RPI4 with HAOS image
Same on RPi5 with fresh installation. Verifying yaml brings: „Integration error: tibber_custom - Requirements for tibber_custom not found: ['matplotlib'].“
So - any ideas left?
@sbyx @MartinHjelmare; sorry for tagging, but since you were involved in the previous fix, I'm humbly asking for assistance here. Any ideas of what can be done?
If this is specific to HAOS, then raising the issue in the corresponding repo might help: https://github.com/home-assistant/operating-system
Still a problem, did someone capable raise the issue to HAOS repo? sorry for tagging, but @tmjo is this something you could help with? Using NorwegianTide on RPi4 with HAOS 12.4 (Core 2024.7.3) and hope so much it will return to work 🙏
I am on a Raspberry Pi 4 (versions attached) using the following configuration: Core. 2024.7.4 Supervisor 2024.06.2 Operating System 12.4 Frontend 20240710.0
configuration.yaml #
When doing a configuration check, I get a spinning circle for 20 minutes and then then:
Configuration warnings Platform error 'camera' from integration 'ha_skyfield' - Requirements for ha_skyfield not found: ['matplotlib'].
Again, this is on an 8GB RPi 4
Thank you.
Michael
Dear @frenck
Would you please check this issue for Raspberry pi 4 and pi 5 ?
This is marked "closed," but the issue still persists (matplotlib not installing on RPi running any version of Home Assistant after 2024.2. Has there been any progress, or is this project (or at least the graph feature that is a key part of the project) being abandoned?
Unfortunately, no, as I looked, there should be a wheel for matplotlib, because only python 3.11 "https://wheels.home-assistant.io/musllinux-index/matplotlib/" is up here, I don't know who made this, but I think this would be the solution if the musllinux matplotlib wheel would be ready for python 3.12
The problem
Help needed. With the update to HA 2024.2 lots of people had problems several different custom integrations that depend on matplotlib. This seemed to be fixed with the release of HA 2024.2.3 including this fix (removed pinning of version).
I'm maintaining two custom integrations myself, and the 2024.2.3 fixed it for me. I'm on NUC with HAOS/proxmox. However, it seems several users of my integrations (and other integrations) seemed to be unable to get matplotlib installed. They seem to be on Rpi4. Can this be related to the issue? The original version pinning had the comment
# Matplotlib 3.6.2 has issues building wheels on armhf/armv7
and since it is now working on three different instances on my side (two HAOS/proxmox + devcontainer) but still is not working for many people, I kindly ask for someone smarter than me to take a look.Sorry if details or logs are not good enough, it is hard for me to get it exact since my systems are working, but others not.
What version of Home Assistant Core has the issue?
core-2024.2.3
What was the last working version of Home Assistant Core?
core-2024.1.1
What type of installation are you running?
Home Assistant OS
Integration causing the issue
Several custom integrations, but issue related to installation of matplotlib (possibly on Rpi4)
Link to integration documentation on our website
No response
Diagnostics information
No response
Example YAML snippet
No response
Anything in the logs that might be useful for us?
Additional information
No response