Open rknotter opened 2 months ago
Hey there @starkillerog, mind taking a look at this issue as it has been labeled with an integration (motion_blinds
) you are listed as a code owner for? Thanks!
(message by CodeOwnersMention)
motion_blinds documentation motion_blinds source (message by IssueLinks)
Are these tilt only covers or can you also move them up/down?
Thanks for responding! These are tilt only.
The problem
I just installed 7 Brel wood shutters, tilt only, with hub. In the app the tilt position (in degrees) is correct, from -90 to 0 (horizontal) to +90. I even finetuned the start/end positions to have a consistent response of all shutters.
I added the Motionblinds integration with (I think) succes. In HASS I can use cover.set_cover_tilt_position, however this seems to be sort of random. For instance: if I set all covers closed (90 degr) in the Brel app and do the following:
service: cover.set_cover_tilt_position target: entity_id: cover.zonwering_beneden data: tilt_position: 0
the shutters tilt end up at random positions (-36, -34, -14, -31, -18, 0 and 7 degrees). The expected behaviour would be to open completely, being -90 degr in the app. Horizontal would be 50 in HASS and 0 in the app.
What version of Home Assistant Core has the issue?
core-2024.5.0
What was the last working version of Home Assistant Core?
No response
What type of installation are you running?
Home Assistant Container
Integration causing the issue
Motionblinds
Link to integration documentation on our website
https://www.home-assistant.io/integrations/motion_blinds/
Diagnostics information
No response
Example YAML snippet
No response
Anything in the logs that might be useful for us?
No response
Additional information
No response