Open RusI4n opened 2 months ago
Hey there @dmulcahey, @adminiuga, @puddly, @thejulianjes, mind taking a look at this issue as it has been labeled with an integration (zha
) you are listed as a code owner for? Thanks!
(message by CodeOwnersMention)
zha documentation zha source (message by IssueLinks)
To make it easier to track down the problem, can you downgrade to the last working version, record a debug log (and download diagnostics for the device), and do the same for 2024.5.0?
What should I do to record a debug log?
Получить TypeApp для Android http://www.typeapp.com/r На 21 мая 2024 г., в 17:13, puddly @.***> написал:п
To make it easier to track down the problem, can you downgrade to the last working version, record a debug log (and download diagnostics for the device), and do the same for 2024.5.0?
— Reply to this email directly, view it on GitHub https://github.com/home-assistant/core/issues/117860#issuecomment-2122735379, or unsubscribe https://github.com/notifications/unsubscribe-auth/AXYIWU75QQKIBIG4IEOTMLTZDNI73AVCNFSM6AAAAABIBRJ3V2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMRSG4ZTKMZXHE . You are receiving this because you authored the thread.Message ID: @.***>
You can enable it from the integration page:
Enable it, click the buttons on the remote a few times, and the log will download when you disable it.
Thank you. I did that yesterday, but there was some misunderstanding with remotes (I have two). So with older version one gyves good states and other the same as on newer version, maybe I just didn't get to the "right version". Anyway I attach wrong operating and the right one, it just different remotes, but on new version both operates in wrong way.
On Wed, May 22, 2024 at 2:38 AM puddly @.***> wrote:
You can enable it from the integration page: image.png (view on web) https://github.com/home-assistant/core/assets/32534428/c3d9b5ac-7eab-4b00-b9d2-2618c0e7549a
Enable it, click the buttons on the remote a few times, and the log will download when you disable it.
— Reply to this email directly, view it on GitHub https://github.com/home-assistant/core/issues/117860#issuecomment-2123597222, or unsubscribe https://github.com/notifications/unsubscribe-auth/AXYIWUYMUXVVP5FCOHSFJCTZDPLHZAVCNFSM6AAAAABIBRJ3V2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMRTGU4TOMRSGI . You are receiving this because you authored the thread.Message ID: @.***>
The problem
Can't say exactly version which started that, but now I can't use Philips HUE remote switch (RWL021) in automations anymore. It is now sends some other messages when I press the buttons, the automation doesn't recognize thus messages. It was like "Button 1 pressed once" or "Button 1 released" before (and that still are in automation choices), but now it provides some other messages (it looks not ok for me) and there is no way to trigger by it. I tried to revert HA core to some versions, looks like it works with 2024.4.0 (not sure if works with latter ones, I only have tried 2024.5.0 and 2024.4.0)
What version of Home Assistant Core has the issue?
core-2024.5.4
What was the last working version of Home Assistant Core?
No response
What type of installation are you running?
Home Assistant OS
Integration causing the issue
ZHA
Link to integration documentation on our website
https://www.home-assistant.io/integrations/zha
Diagnostics information
No response
Example YAML snippet
No response
Anything in the logs that might be useful for us?
No response
Additional information
No response