Open motogon opened 1 month ago
Hey there @tuya, @zlinoliver, @frenck, mind taking a look at this issue as it has been labeled with an integration (tuya
) you are listed as a code owner for? Thanks!
(message by CodeOwnersMention)
tuya documentation tuya source (message by IssueLinks)
Seeing what sounds to be the same / similar issue. After updating to 2024.7.1 none of the motion sensors on my system return to the clear / normal state. Restarting the integration gets them back to the correct state to match the state in Smart Life / Tuya app.
Thanks
Same here. Sensors are not updating after moving to 2024.7.1
I have de same problem. Sensors are not updating after updating to 2024.7.1
When you restart home assistant, all the devices are working, alarm, sensors, plug, thermostat, etc. all devices are Wi-Fi. But in a few hours they freeze, they work directly with the app but not the home assistant. I also think this happens since update 2024.7.0. Greetings
I got this issue with mith tubular motors for my roller blinds. The motors are from A-OK and controlled via Tuya. Since update to 2024.07.x the status is not updated. A motor got status open eventhough it was closed. When I opened it the status did not change. The other three motors had status unavailable, opening or closing did not change the status. The control via dashbord (entity card, scripts, automations, etc. seems to works normal.
I tried with 2024.7.0 and 2024.7.3 both have this issue.
As I need the correct status of the blinds in some automations I reverted back to 2024.6.4 which is the last version where it is working fine.
PIR sensors are not resetted, remain detecting motion. Issue only for HA. Tuya is working fine. from 2024.7.0 onward
Hey there @tuya, @zlinoliver, @frenck
when do we expect the problem to be solved?
Eu tive esse problema com motores tubulares mith para minhas persianas de rolo. Os motores são da A-OK e controlados via Tuya. Desde a atualização para 2024.07.x o status não é atualizado. Um motor obteve o status aberto mesmo estando fechado. Quando eu o abri o status não mudou. Os outros três motores tiveram status indisponível, abrir ou fechar não alterou o status. O controle via painel (cartão de entidade, scripts, automações, etc. parece funcionar normalmente.
Tentei com 2024.7.0 e 2024.7.3 e ambos apresentam esse problema.
Como preciso do status correto das persianas em algumas automações, voltei para 2024.6.4, que é a última versão em que está funcionando bem.
olá, conseguiu alguma solução? Estou com o mesmo problema com as persianas. Será que somente com atualização da integração?
olá, conseguiu alguma solução? Estou com o mesmo problema com as persianas. Será que somente com atualização da integração?
I switched back to Home Assistant Core 2024.6.4 which is the last one working fine for me.
The problem
Again problem with TUYA integration , binary sensors do not update status . after update to 2024.7.0 .
Motion sensor, door opening . After the first status change (motion detected or door open) - does not return to the initial state although there is no motion and the door has long been closed. Before reboot integration .
What version of Home Assistant Core has the issue?
2024.7.0
What was the last working version of Home Assistant Core?
2024.6.1
What type of installation are you running?
Home Assistant OS
Integration causing the issue
tuya
Link to integration documentation on our website
https://www.home-assistant.io/integrations/tuya
Diagnostics information
tuya-afade3280012031b9d6e51fcf86fd9f6-PIR motion sensor-f8ee812c042e67e900c38b92a4c67fff.json
Example YAML snippet
No response
Anything in the logs that might be useful for us?
No response
Additional information
No response