search

home-assistant / core

:house_with_garden: Open source home automation that puts local control and privacy first.
https://www.home-assistant.io
Apache License 2.0
72.05k stars 30.18k forks source link

Home Assistant keine Funktion #121339

Closed Schati1991 closed 2 months ago

Schati1991 commented 3 months ago

The problem

Habe auf core 2024.7.1 upgedatet und nach Neustart funktioniert nichts mehr Home Assistant wurde zwar geladen aber es lässt sich nichts mehr steuern. Wen man in der Seitenleiste auf etwas Klickt fängt es an zum Laden aber es wird nichts geöffnet. Wie es momentan aussieht werde ich meinen Nuc neu Aufsetzten müssen weil ich kann weder ein Backup noch eine neue Version downloaden.

What version of Home Assistant Core has the issue?

2024.7.1

What was the last working version of Home Assistant Core?

2024.7.0

What type of installation are you running?

Home Assistant OS

Integration causing the issue

No response

Link to integration documentation on our website

No response

Diagnostics information

No response

Example YAML snippet

No response

Anything in the logs that might be useful for us?

No response

Additional information

No response

mib1185 commented 3 months ago

Hi @Schati1991 We use the English language, since it is a global project. About your issue - do you see any error message on the console of your system? Just to be sure, did you try cleaning the cache of your browser?

Schati1991 commented 3 months ago

Sorry I don't have access to the console because it won't open either. I would have to connect a screen to my Nuc. Yes, I've already tried it too

mib1185 commented 3 months ago

before re-installing the whole system, you should first connect a monitor and check if there are any messages shown and also try to restart ha core in safe mode with the camera mmand ha core restart --safe-mode. Here you will find further ha cli commands and examples

Schati1991 commented 3 months ago

Ok thanks, I'll test it and report back

Schati1991 commented 3 months ago

So I don't think an error is displayed I have executed the command, how should I proceed now? IMG_20240706_014029 IMG_20240706_014925

Schati1991 commented 3 months ago

Kamera übersetzen In Safe Mode Does it work again. Should I go back to the old core and how do I get back to normal mode?

mib1185 commented 3 months ago

safe mode means, all custom components will be disabled and not loaded. So the issue is caused by some of your custom integrations. Restart your system, so that ha core starts in normal mode again. When system is started and the console is shown, check the logs by issuing the command ha core logs.

Schati1991 commented 3 months ago

Everything is working again now, I have loaded the last backup and everything is working normally again. Thanks again, I will definitely remember that about Safe Mode. Now the only question is should I wait for the next version for the core update

mib1185 commented 3 months ago

you should check the logs to find out which custom integration caused this issue, so that you can report that issue to the maintainer of this custom component. It is not guaranteed that a ha core update will fix this issue, since the ha project does not maintain custom components

issue-triage-workflows[bot] commented 2 months ago

There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.