Open w1Ngx opened 1 month ago
Hey there @stevenlooman, mind taking a look at this issue as it has been labeled with an integration (upnp
) you are listed as a code owner for? Thanks!
(message by CodeOwnersMention)
upnp documentation upnp source (message by IssueLinks)
I have this problem already since october 2023, maybe 1 or 2 months earlier. It started after an update of the kpn experience box 10. I never cared as I didn' see any useful information from this device.
Hi @w1Ngx. Can you enable debug logging and post it here or mail it to me? I am curious what is happening behind the scenes.
@WilcoDeGroot, the KPN Experience Box is not a Fritz!box as far as I know. Can you make a new issue for this?
Also, same as for w1Ngx, can you enable debug logging and post it in that issue, or mail it directly to me?
Hi,
i just deleted all entries, rebooted and had it reconfigured. Now it does not show the error any more.
The following is what I had until your email:
I had 12 entities which showed lots of info about the device, most of them stopped working together with the extenders. All stopped after an update of the Experiabox during our vacation, so I don’t remember the exact date. As I did not find this information relevant I never cared to search for a solution, all this information from the entities is also available directly from the WebUI of the device.
Error messages on screen.
WiFiExtender-246790(Master)
No devices or entities
Failed setup, will retry: Device not discovered: uuid:00000000-0000-0001-0000-709741246790::urn:schemas-upnp-org:device:InternetGatewayDevice:1
WiFiExtender-246790(Master)
No devices or entities
Failed setup, will retry: Device not discovered: uuid:00000000-0000-0001-0000-709741246790::urn:schemas-upnp-org:device:InternetGatewayDevice:1
This is the display log after just reinstalling:
The full log is attached.
Then I removed all three integrations and restarted the HA.
The system found the new devices: Experiabox V10 and only the Wifi-extender Master, not the slave (both master and slave seem to work fine).
Both are installed, the V10 is ok, the extender remains coming with the failure, the slave has not been found but there are no entities.
Short log:
And the full log attached.
In fact I have a HA installed in our workshop there we had the same issue, more or less at the same time (plus/minus a few days) also Experiabox V10.
Met vriendelijke groeten,
Best regards,
Wilco de Groot
From: w1Ngx @.> Sent: Monday, August 5, 2024 9:32 AM To: home-assistant/core @.> Cc: Wilco de Groot @.>; Mention @.> Subject: Re: [home-assistant/core] Error setting up entry (Issue #122106)
Hi,
i just deleted all entries, rebooted and had it reconfigured. Now it does not show the error any more.
— Reply to this email directly, view it on GitHub https://github.com/home-assistant/core/issues/122106#issuecomment-2268371734 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AT6SQUGWCTPQMDE4RBOXDV3ZP4S7ZAVCNFSM6AAAAABLBNYTTGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENRYGM3TCNZTGQ . You are receiving this because you were mentioned. https://github.com/notifications/beacon/AT6SQUB7WD3WQ4FUTCBRZU3ZP4S7ZA5CNFSM6AAAAABLBNYTTGWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTUHGSNRM.gif Message ID: @. @.> >
Thank you @WilcoDeGroot . Unfortunately, you cannot attach files/images when replying to issues via email. I do think you intended to add something. Can you mail it to me directly? You can find my mail address on my profile.
The problem
Hi,
after one of the recent core updates the upnp integration for my fritz!box 6690 stopped working.
What version of Home Assistant Core has the issue?
2024.7.2
What was the last working version of Home Assistant Core?
2024.6
What type of installation are you running?
Home Assistant OS
Integration causing the issue
upnp
Link to integration documentation on our website
No response
Diagnostics information
No response
Example YAML snippet
No response
Anything in the logs that might be useful for us?
Additional information
No response