Problem with Aeotec ZWA001 LED Bulb 6 Multi-White

[03397]

Guys, I am using HASS 0.82.1 and I have a problem with the following Zwave components. These leds are suppsoed to change color all the spectrum of white 2500-6700K.

I have been trying to use this with no success.

this is what is in the log file

2018-11-28 22:33:01.167 Info, Node004, Value::Set - COMMAND_CLASS_SWITCH_MULTILEVEL - Dimming Duration - 5 - 1 - 255
2018-11-28 22:33:01.168 Detail, Node004, Initial read of value
2018-11-28 22:33:01.168 Detail, Node004, Notification: ValueChanged
2018-11-28 22:33:01.169 Info, Node004, Value::Set - COMMAND_CLASS_SWITCH_MULTILEVEL - Level - 0 - 1 - 255
2018-11-28 22:33:01.170 Info, Node004, SwitchMultilevel::Set - Setting to level 255
2018-11-28 22:33:01.170 Info, Node004,   Duration: Default
2018-11-28 22:33:01.170 Detail, Node004, Queuing (Send) SwitchMultilevelCmd_Set (Node=4): 0x01, 0x0b, 0x00, 0x13, 0x04, 0x04, 0x26, 0x01, 0xff, 0xff, 0x25, 0x2b, 0xce
2018-11-28 22:33:01.170 Detail, Node004, Queuing (Send) SwitchMultilevelCmd_Get (Node=4): 0x01, 0x09, 0x00, 0x13, 0x04, 0x02, 0x26, 0x02, 0x25, 0x2c, 0xce
2018-11-28 22:33:01.182 Detail,
2018-11-28 22:33:01.182 Info, Node004, Sending (Send) message (Callback ID=0x2b, Expected Reply=0x13) - SwitchMultilevelCmd_Set (Node=4): 0x01, 0x0b, 0x00, 0x13, 0x04, 0x04, 0x26, 0x01, 0xff, 0xff, 0x25, 0x2b, 0xce
2018-11-28 22:33:01.192 Detail, Node004,   Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
2018-11-28 22:33:01.193 Detail, Node004,   ZW_SEND_DATA delivered to Z-Wave stack
2018-11-28 22:33:01.207 Detail, Node004,   Received: 0x01, 0x07, 0x00, 0x13, 0x2b, 0x00, 0x00, 0x02, 0xc2
2018-11-28 22:33:01.208 Detail, Node004,   ZW_SEND_DATA Request with callback ID 0x2b received (expected 0x2b)
2018-11-28 22:33:01.208 Info, Node004, Request RTT 25 Average Request RTT 27
2018-11-28 22:33:01.208 Detail,   Expected callbackId was received
2018-11-28 22:33:01.208 Detail,   Expected reply was received
2018-11-28 22:33:01.209 Detail,   Message transaction complete
2018-11-28 22:33:01.209 Detail,
2018-11-28 22:33:01.209 Detail, Node004, Removing current message
2018-11-28 22:33:01.209 Detail,
2018-11-28 22:33:01.209 Info, Node004, Sending (Send) message (Callback ID=0x2c, Expected Reply=0x04) - SwitchMultilevelCmd_Get (Node=4): 0x01, 0x09, 0x00, 0x13, 0x04, 0x02, 0x26, 0x02, 0x25, 0x2c, 0xce
2018-11-28 22:33:01.218 Detail, Node004,   Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
2018-11-28 22:33:01.218 Detail, Node004,   ZW_SEND_DATA delivered to Z-Wave stack
2018-11-28 22:33:01.270 Detail, Node004,   Received: 0x01, 0x07, 0x00, 0x13, 0x2c, 0x00, 0x00, 0x05, 0xc2
2018-11-28 22:33:01.271 Detail, Node004,   ZW_SEND_DATA Request with callback ID 0x2c received (expected 0x2c)
2018-11-28 22:33:01.271 Info, Node004, Request RTT 61 Average Request RTT 44
2018-11-28 22:33:01.271 Detail,   Expected callbackId was received
2018-11-28 22:33:01.287 Detail, Node004,   Received: 0x01, 0x09, 0x00, 0x04, 0x00, 0x04, 0x03, 0x26, 0x03, 0x23, 0xf3
2018-11-28 22:33:01.287 Detail,
2018-11-28 22:33:01.287 Info, Node004, Response RTT 77 Average Response RTT 58
2018-11-28 22:33:01.287 Info, Node004, Received SwitchMultiLevel report: level=35
2018-11-28 22:33:01.288 Detail, Node004, Initial read of value
2018-11-28 22:33:01.288 Detail, Node004,   Expected reply and command class was received
2018-11-28 22:33:01.288 Detail, Node004,   Message transaction complete
2018-11-28 22:33:01.288 Detail,
2018-11-28 22:33:01.288 Detail, Node004, Removing current message
2018-11-28 22:33:01.288 Detail, Node004, Notification: ValueChanged

The color though never changes, I have tried multiple combinations for this but no luck

[03397]

I forgot to tell you that I am using Aeotec ZW090 Z-Stick Gen5 EU and the led in question has the following attributes

light.aeotec_zwa001_led_bulb_6_multiwhite_level_2	on	brightness: 90 node_id: 4 value_index: 0 value_instance: 1 value_id: 72057594109853697 friendly_name: Family Room Light supported_features: 49

[warcanoid]

I have the same problem with zwave Zipato Bulb2, no color anymore

[03397]

I have upgraded to 0.85.0 which supposedly solved this but it does not. The sliding bar is there but it does not change the color.

[digitalresistor]

I am running 0.89.2 and unfortunately my "Aeotec ZW098 LED Bulb" is not correctly showing up as having a white channel on the slider card.

I am however able to send it manual commands:

{
  "entity_id": "light.sun_level", "white_value": 255, "brightness_pct": 10
}

To have it turn on the bright white. I have yet to figure out how to get it to go into warm white, which the bulb also supports.

[DerekL]

Aeotec ZW121 LED Strip

HAv 0.90.2

Same issue as bertjwregeer, no white color temp slider.

[digitalresistor]

I would like to update that with 0.90.2 I do get the white color temp slider on my devices, so the issue is resolved from my standpoint.

[03397]

@bertjwregeer I have the slider too but it does not work. Which bulb you have? Does it work?

[digitalresistor]

"Aeotec ZW098 LED Bulb" as I mentioned in my previous comment. I am able to switch between the two color temperatures without issue.

[blazarmilkywayflybee]

hass.io 0.93.1 seeing this issue with my ZW098.

[warcanoid]

Has anyone tried zwave2mqtt addon if is light support better?

[blazarmilkywayflybee]

Out of the question for me as I'm using a Vera Plus as my controller.

[stale[bot]]

There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue now has been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.

[03397]

Please do not change the ticket. The problem is still there.

[stale[bot]]

There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue now has been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.

[03397]

Problem still there at the latest version

[03397]

Guys, can someone help with this? I will really appreciate it.

[stale[bot]]

There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue now has been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.

[03397]

After version 0.109.1 still there. No work around or whatsoever.

[ackstorm23]

I have the same problem with the Aeotec ZW098. No white channel is detected.

Manually attempting to manipulate it with scenes using white_value or color_temp does absolutely nothing.

Home assistant detects is a color device and indeed I can manipulate the colors, the white channel cannot be changed.

The result is that this bulb can only display colored light. To gain a 'white' color I have to manipulate the colors to emulate this, and the brightness is laughably low like this.

Within the Vera Plus controller the white channel allows me to make the light 4x as bright.

[stale[bot]]

There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue now has been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.

[03397]

Still there

[Cl3tus]

I have the exact same issue with a ZWA001 LED Bulb 6 Multi-White. It only shows RGB sliders and no white balance.

[Cl3tus]

I have the exact same issue with a ZWA001 LED Bulb 6 Multi-White. It only shows RGB sliders and no white balance.

Is there anything i can do, provide, to help solving this issue? (Excuse the shortness, i've never contributed on GITHUB, i would like to start being active)

[github-actions[bot]]

There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.

[03397]

Any news on that?

[Cl3tus]

Still not working

[github-actions[bot]]

There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.