Closed heilloos closed 7 years ago
What kind of component is your humidity thermometer?
Hi Daniel,
It's a RFX thermometer. Do you need more info?
-------- Origineel bericht -------- Van: "Daniel Høyer Iversen" notifications@github.com Verzonden: 18 januari 2017 14:30:54 CET Aan: home-assistant/home-assistant home-assistant@noreply.github.com CC: heilloos hans@hofstee.nu, Author author@noreply.github.com Onderwerp: Re: [home-assistant/home-assistant] sensor.thermometer_humidity (#5416)
What kind of component is your humidity thermometer?
-- You are receiving this because you authored the thread. Reply to this email directly or view it on GitHub: https://github.com/home-assistant/home-assistant/issues/5416#issuecomment-273475392
Met vriendelijke groeten, with kind regards, Hans Hofstee
Do you use the Tellstick component to get the data?
I use a raspberry with usb rfxcom transciever. The thermometer is a Cresta thermo - hygro. In the yaml the config of the rfxtrx sensor and the two data types mentioned as des ribed in th HA guidance.
-------- Origineel bericht -------- Van: "Daniel Høyer Iversen" notifications@github.com Verzonden: 18 januari 2017 16:17:13 CET Aan: home-assistant/home-assistant home-assistant@noreply.github.com CC: heilloos hans@hofstee.nu, Author author@noreply.github.com Onderwerp: Re: [home-assistant/home-assistant] sensor.thermometer_humidity (#5416)
Do you use the Tellstick component to get the data?
-- You are receiving this because you authored the thread. Reply to this email directly or view it on GitHub: https://github.com/home-assistant/home-assistant/issues/5416#issuecomment-273503090
Met vriendelijke groeten, with kind regards, Hans Hofstee Mobile (31) (0) 6 51578359
Hi Daniel,
Did not get the error message again up to now
Met vriendelijke groet, With kind regards, Hans Hofstee The Netherlands De Rietvink 10 1852 RM Heiloo Mobile (31) (0) 6 51578359
Van: Daniel Høyer Iversen [mailto:notifications@github.com] Verzonden: woensdag 18 januari 2017 16:17 Aan: home-assistant/home-assistant home-assistant@noreply.github.com CC: heilloos hans@hofstee.nu; Author author@noreply.github.com Onderwerp: Re: [home-assistant/home-assistant] sensor.thermometer_humidity (#5416)
Do you use the Tellstick component to get the data?
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/home-assistant/home-assistant/issues/5416#issuecomment-273503090 , or mute the thread https://github.com/notifications/unsubscribe-auth/AQGdHMsFo0xPcy6fB5kuBYvvk6Xvt_OVks5rTiz5gaJpZM4LmqhJ .
Ok, I have check the code and can not see anything wrong. Closing this, but please open a new issue if it remains a problem.
Make sure you are running the latest version of Home Assistant before reporting an issue.
You should only file an issue if you found a bug. Feature and enhancement requests should go in the Feature Requests section of our community forum:
Home Assistant release (
hass --version
): 35.3Python release (
python3 --version
): 3Component/platform: sensor
Description of problem:
sensor.thermometer_humidity took 0.435 seconds. Please report platform to the developers at https://goo.gl/Nvioub
Expected:
Problem-relevant
configuration.yaml
entries and steps to reproduce:Traceback (if applicable):
Additional info: