Closed gdg316 closed 2 years ago
Hey there @dmulcahey, @adminiuga, mind taking a look at this issue as it has been labeled with an integration (zha
) you are listed as a code owner for? Thanks!
(message by CodeOwnersMention)
zha documentation zha source (message by IssueLinks)
It's not supposed to work. Hue exposes that for light control.
@Adminiuga Ok thanks -so I can not use the Hue Motion sensor with ZHA ??
@Adminiuga Guess my real question if its not going to work ?? I want it to trigger Motion when walking up my stairs and turn the stairs light on . So do I need to delete from ZHA ? and Pair with my Hue Bridge . Can it be paired to Both ?? The Only thing with Hue it will only show Lux , Motion & Temp . ZHA shows like 5 Entities
On the device card click on +
after Automations and you is having all you can do with it like on occupancy, on no occupancy and so on.
@MattWestb Right now its configured On with Occupancy & off with No Occupancy But I think Motion & Occupancy are different - like I think Occupancy has a Delay where Motion On or Off is immediate
I only using my 2 as light sensors and then i finding 2 good working ones then they going in the BLACK BOX of not good working devices then they is always jumping around and using the worse router in my network = very bad behaving devices and if you not have so much routers around then is leaving your network.
I only knowing that they is sending one signal then somthing is moving and is having one delay for resetting it for sending commands to lights. (its one light controlling device not one intruder alarm sensor)
Test how it working and i think one sensor is if you is opening it up.
Use occupancy, there's no difference in hue. It triggers immediately and release quickly on no motion in about 30s iirc
@Adminiuga Thank You then I'll leave paired with ZHA - I never paired it with my Hue Bridge .
The problem
Paired Hue motion sensor , everything work except Motion ?? Occupancy is detecting , illuminance , temp & battery are working fine
What version of Home Assistant Core has the issue?
core-2021.10.6
What was the last working version of Home Assistant Core?
No response
What type of installation are you running?
Home Assistant OS
Integration causing the issue
Zigbee Possibly
Link to integration documentation on our website
https://www.home-assistant.io/integrations/zha/
Example YAML snippet
No response
Anything in the logs that might be useful for us?
Additional information
No response