Closed Frans1949 closed 2 years ago
@Frans1949 Two questions:
The firmware of the stretch 2.3.15 The log: no information in LOG
Op di 7 jun. 2022 17:57 schreef Bouwe Westerdijk @.***>:
@Frans1949 https://github.com/Frans1949 Two questions:
- What is the firmware version of your Stretch?
- Which error information is shown in the HA LOGBOEK after the 'cannot connect` message appears?
— Reply to this email directly, view it on GitHub https://github.com/home-assistant/core/issues/73159#issuecomment-1148860731, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZQGY5QEX35JXC6DAWRDZGLVN5WOLANCNFSM5YCOL2MA . You are receiving this because you were mentioned.Message ID: @.***>
Ok thanks. Hmm, with no information this will be difficult to solve.
Are you willing, and able(?), to install Plugwise-beta? See here on how to do that: https://github.com/plugwise/plugwise-beta#how-to-install
Why install plugwise-beta? Because it's much easier for me to make changes in the plugwise-beta code than in the Core plugwise code that you are using now.
On second thought, don't install via HACS, meaning, don't install HACS first. I would want you to install an older plugwise-beta version but that one is not shown in HACS.
In need to think a little more on this, I have an idea about what the problem might be, but I don't know yet how to change the code so you can test, via Plugwise-beta.
Can you advise me where to find it then?
Op di 7 jun. 2022 19:05 schreef Bouwe Westerdijk @.***>:
On second thought, don't install via HACS, meaning, don't install HACS first. I would want you to install an older plugwise-beta version but that one is not shown in HACS.
— Reply to this email directly, view it on GitHub https://github.com/home-assistant/core/issues/73159#issuecomment-1148936902, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZQGY5W2IZVKYD4464AJUQDVN56MNANCNFSM5YCOL2MA . You are receiving this because you were mentioned.Message ID: @.***>
plugwise documentation plugwise source (message by IssueLinks)
Hey there @compatech, @brefra, @frenck, mind taking a look at this issue as it has been labeled with an integration (plugwise
) you are listed as a code owner for? Thanks!
(message by CodeOwnersMention)
On 3rd thought, please install Plugwise-beta: https://github.com/plugwise/plugwise-beta#how-to-install And try adding your Stretch and let me know the result, including any information in the LOGBOEK.
@Frans1949 Plugwise-beta v0.24.1 was released containing a few updates that should help with your problem. Meaning, there should be more info provided in the LOGBOEK when the "cannot connect" happens.
Thanks for the update, I am busy to install Hacs, I notice i have to learn a lot about automatisering. But there is progress !
Op za 11 jun. 2022 12:38 schreef Bouwe Westerdijk @.***
:
@Frans1949 https://github.com/Frans1949 Plugwise-beta v0.24.1 was released containing a few updates that should help with your problem. Meaning, there should be more info provided in the LOGBOEK when the "cannot connect" happens.
— Reply to this email directly, view it on GitHub https://github.com/home-assistant/core/issues/73159#issuecomment-1152896624, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZQGY5W4HGD2KHERHXIJWH3VORUDJANCNFSM5YCOL2MA . You are receiving this because you were mentioned.Message ID: @.***>
Yes, Home Assistant requires some learning :) Custom_components and HACS, and have you learned about Add-ons yet? https://www.home-assistant.io/addons/
Install Hacs failed , I tryed a lot a lot of methods. I installed Home assistant with Hass.io, and I see that there are several ways to install HA.. Could it be that there is the start of my problem?
Op za 11 jun. 2022 om 13:03 schreef Bouwe Westerdijk < @.***>:
Yes, Home Assistant requires some learning :) Custom_components and HACS, and have you learned about Add-ons yet? https://www.home-assistant.io/addons/
— Reply to this email directly, view it on GitHub https://github.com/home-assistant/core/issues/73159#issuecomment-1152899697, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZQGY5VUN3TRJXNUFDACEV3VORW6TANCNFSM5YCOL2MA . You are receiving this because you were mentioned.Message ID: @.***>
Could very well be. The preferred way is to install the Home Assistant Operating System. See here: https://www.home-assistant.io/installation/
Thanks, I think I start all over
Op ma 13 jun. 2022 19:58 schreef Bouwe Westerdijk @.***
:
Could very well be. The preferred way is to install the Home Assistant Operating System. See here: https://www.home-assistant.io/installation/
— Reply to this email directly, view it on GitHub https://github.com/home-assistant/core/issues/73159#issuecomment-1154216584, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZQGY5WXHLUHIYSE3ZTQJZTVO5ZGDANCNFSM5YCOL2MA . You are receiving this because you were mentioned.Message ID: @.***>
Hallo, can you help me with the next problem?
At NODO I bought a RFLink gateway,
And I tried to install it.
By the RFLink integration page searched for the port on which RFLink should listen.
I'm looking for something in the spirit of
port:/dev/serial/by-id/usb-id01234
Looked via Settings-->Devices&Settings
-->Supervisor
And what's next?
Also tried
Settingsà SystemàHardware
Then 3 dots and looked at port and usb
Nowhere to be found in the form of:
Port:/dev/serial/by-id/usb-id01234
I use Raspberry pi4 RPI4-64
Home assistant release 2022.8
Op di 14 jun. 2022 om 15:06 schreef Frans Dieker @.***>:
I started all over and HA finds stretch !. I can configer it and go ahead with my project. Thanks for your support
Op ma 13 jun. 2022 om 21:08 schreef Frans Dieker @.***>:
Thanks, I think I start all over
Op ma 13 jun. 2022 19:58 schreef Bouwe Westerdijk < @.***>:
Could very well be. The preferred way is to install the Home Assistant Operating System. See here: https://www.home-assistant.io/installation/
— Reply to this email directly, view it on GitHub https://github.com/home-assistant/core/issues/73159#issuecomment-1154216584, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZQGY5WXHLUHIYSE3ZTQJZTVO5ZGDANCNFSM5YCOL2MA . You are receiving this because you were mentioned.Message ID: @.***>
@Frans1949 Do you know how to access the command-line on your Pi? If yes, enter the command: cd /dev/serial/by_id Now you should see the id's of the connected USB-devices.
@Frans1949 please close this issue when the problem is solved, or when the problem is gone.
I know how to acces the commandline. send a screenshot. problem not solved or gone. I stop with HA, cost me to much time
The problem
I try to install plugwise stretch to HA, always get the message " cannot connect " after long search.
What version of Home Assistant Core has the issue?
Core-2022.6.2
What was the last working version of Home Assistant Core?
No response
What type of installation are you running?
Home Assistant Core
Integration causing the issue
Automation Plugwise (stretch)
Link to integration documentation on our website
No response
Diagnostics information
No response
Example YAML snippet
No response
Anything in the logs that might be useful for us?
No response
Additional information
No response