guide not working for me, install with ESP32-S3-BOX3 in chrome but no wi-fi

[starschild86]

Feedback

i followed the guide multiple times last week and again today. i am always able to install voice assistant into my esp32 but never asks me for wifi input, then esp32 boots and it says no wi-fi. i've tried to change port, change cable, reset pc, all with no luck. a similar process for my two everything presence one esp32 devices worked yesterday (from this link) https://everythingsmarthome.github.io/everything-presence-one/updating.html so i'm guessing my pc/ usb/ cable are ok?

URL

https://www.home-assistant.io/voice_control/s3_box_voice_assistant/

Version

2024.5.5

Additional information

No response

[c0ffeeca7]

Have you tried the troubleshooting steps? https://www.home-assistant.io/voice_control/troubleshooting_the_s3_box/

[kbx81]

We've identified and fixed the issue in the PR linked above; a patch has been released and the updated binaries will be available on the projects page in about a day or so.

[btreinders]

So link will not work yet? It still is not asking to setup wifi after installation. Thank you.

[kbx81]

Sorry about that -- the updated image is available on the site now. I tried it with my Box-3 and Box-Lite and it worked, although I did have to reset the Box-3 once manually after installing. Let us know if it works for you.

[btreinders]

The first time I went to the website and connected it asked to setup wifi right away without a fresh install. It then asked to add to Home Assistant and that failed so I reset it manually like you had to and then it went to the No wifi sad face with bar code. I installed again since this time there was only install and logs options again. It finished installing and is just like before, never goes to wifi setup. Thank you.

---

From: Keith Burzinski @.> Sent: Thursday, June 6, 2024 9:46 PM To: home-assistant/home-assistant.io @.> Cc: btreinders @.>; Comment @.> Subject: Re: [home-assistant/home-assistant.io] guide not working for me, install with ESP32-S3-BOX3 in chrome but no wi-fi (Issue #33039)

Sorry about that -- the updated image is available on the site now. I tried it with my Box-3 and Box-Lite and it worked, although I did have to reset the Box-3 once manually after installing. Let us know if it works for you.

— Reply to this email directly, view it on GitHubhttps://github.com/home-assistant/home-assistant.io/issues/33039#issuecomment-2153751421, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AEOAYLW6LPHOICM5GM5FMK3ZGENG7AVCNFSM6AAAAABIVD5O5GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNJTG42TCNBSGE. You are receiving this because you commented.Message ID: @.***>

[btreinders]

I tried some more and finally did get it to work. Seems like there is still something there that isn't quite right but at least I am up an running! Thank you!

---

From: Brent Reinders @.> Sent: Friday, June 7, 2024 6:19 AM To: home-assistant/home-assistant.io @.>; home-assistant/home-assistant.io @.> Cc: Comment @.> Subject: Re: [home-assistant/home-assistant.io] guide not working for me, install with ESP32-S3-BOX3 in chrome but no wi-fi (Issue #33039)

The first time I went to the website and connected it asked to setup wifi right away without a fresh install. It then asked to add to Home Assistant and that failed so I reset it manually like you had to and then it went to the No wifi sad face with bar code. I installed again since this time there was only install and logs options again. It finished installing and is just like before, never goes to wifi setup. Thank you.

---

From: Keith Burzinski @.> Sent: Thursday, June 6, 2024 9:46 PM To: home-assistant/home-assistant.io @.> Cc: btreinders @.>; Comment @.> Subject: Re: [home-assistant/home-assistant.io] guide not working for me, install with ESP32-S3-BOX3 in chrome but no wi-fi (Issue #33039)

Sorry about that -- the updated image is available on the site now. I tried it with my Box-3 and Box-Lite and it worked, although I did have to reset the Box-3 once manually after installing. Let us know if it works for you.

— Reply to this email directly, view it on GitHubhttps://github.com/home-assistant/home-assistant.io/issues/33039#issuecomment-2153751421, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AEOAYLW6LPHOICM5GM5FMK3ZGENG7AVCNFSM6AAAAABIVD5O5GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNJTG42TCNBSGE. You are receiving this because you commented.Message ID: @.***>

[Yeahoover]

Hello, I have the same issue. I used two different data cables (as described in the "The Wi-Fi dialog never shows after the installation"), but it does not work.