No HDMI display on Khadas VIM3

Describe the issue you are experiencing

When booting HAOS, there is no display on the HDMI port of the Khadas VIM3

What operating system image do you use?

khadas-vim3 (Khadas VIM3)

What version of Home Assistant Operating System is installed?

8.2

Did you upgrade the Operating System.

Steps to reproduce the issue

Boot HAOS 8.2 on Khadas VIM3

Anything in the Supervisor logs that might be useful for us?

n/a

Anything in the Host logs that might be useful for us?

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.15.45 (builder@0e93cb2add5f) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot -g799554151) 9.4.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Wed Jun 8 22:49:54 UTC 2022
[    0.000000] Machine model: Khadas VIM3
[    0.000000] efi: UEFI not found.
[    0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'secmon@5000000': base 0x0000000005000000, size 3 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000e4c00000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x00000000f4e5afff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x00000000052fffff]
[    0.000000]   node   0: [mem 0x0000000005300000-0x00000000072fffff]
[    0.000000]   node   0: [mem 0x0000000007300000-0x00000000f4e5afff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000f4e5afff]
[    0.000000] On node 0, zone DMA: 12709 pages in unavailable ranges
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 20 pages/cpu s41880 r8192 d31848 u81920
[    0.000000] pcpu-alloc: s41880 r8192 d31848 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 987425
[    0.000000] Kernel command line: zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=6f61b1a92e4f469b8816f131cbe9dfb7 cgroup_enable=memory fsck.repair=yes root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait rauc.slot=A console=tty0 console=ttyAML0,115200n8
[    0.000000] Unknown kernel command line parameters "cgroup_enable=memory", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 3615276K/4012396K available (12672K kernel code, 1352K rwdata, 3824K rodata, 2240K init, 423K bss, 134976K reserved, 262144K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000210] Console: colour dummy device 80x25
[    0.000573] printk: console [tty0] enabled
[    0.000615] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[    0.000637] pid_max: default: 32768 minimum: 301
[    0.000741] LSM: Security Framework initializing
[    0.000855] AppArmor: AppArmor initialized
[    0.000954] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000985] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002960] rcu: Hierarchical SRCU implementation.
[    0.005017] EFI services will not be available.
[    0.005451] smp: Bringing up secondary CPUs ...
[    0.006123] Detected VIPT I-cache on CPU1
[    0.006184] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.007380] CPU features: detected: Spectre-v2
[    0.007392] CPU features: detected: Spectre-v4
[    0.007396] CPU features: detected: Spectre-BHB
[    0.007401] CPU features: detected: ARM erratum 858921
[    0.007406] Detected VIPT I-cache on CPU2
[    0.007433] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.007448] arch_timer: CPU2: Trapping CNTVCT access
[    0.007457] CPU2: Booted secondary processor 0x0000000100 [0x410fd092]
[    0.008109] Detected VIPT I-cache on CPU3
[    0.008129] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.008137] arch_timer: CPU3: Trapping CNTVCT access
[    0.008143] CPU3: Booted secondary processor 0x0000000101 [0x410fd092]
[    0.008757] Detected VIPT I-cache on CPU4
[    0.008777] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.008784] arch_timer: CPU4: Trapping CNTVCT access
[    0.008790] CPU4: Booted secondary processor 0x0000000102 [0x410fd092]
[    0.009424] Detected VIPT I-cache on CPU5
[    0.009444] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.009452] arch_timer: CPU5: Trapping CNTVCT access
[    0.009457] CPU5: Booted secondary processor 0x0000000103 [0x410fd092]
[    0.009531] smp: Brought up 1 node, 6 CPUs
[    0.009704] SMP: Total of 6 processors activated.
[    0.009716] CPU features: detected: 32-bit EL0 Support
[    0.009725] CPU features: detected: 32-bit EL1 Support
[    0.009737] CPU features: detected: CRC32 instructions
[    0.018945] CPU: All CPU(s) started at EL2
[    0.019036] alternatives: patching kernel code
[    0.020797] devtmpfs: initialized
[    0.026782] Registered cp15_barrier emulation handler
[    0.026815] Registered setend emulation handler
[    0.026827] KASLR disabled due to lack of seed
[    0.026957] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.026980] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.030731] pinctrl core: initialized pinctrl subsystem
[    0.031042] DMI not present or invalid.
[    0.031528] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.032804] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033064] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033327] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.033346] audit: initializing netlink subsys (disabled)
[    0.033446] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1
[    0.033653] thermal_sys: Registered thermal governor 'step_wise'
[    0.033658] thermal_sys: Registered thermal governor 'user_space'
[    0.034144] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.034253] ASID allocator initialised with 65536 entries
[    0.035072] Serial: AMBA PL011 UART driver
[    0.047382] platform ff900000.vpu: Fixing up cyclic dependency with ff600000.hdmi-tx
[    0.052603] platform hdmi-connector: Fixing up cyclic dependency with ff600000.hdmi-tx
[    0.057749] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.057775] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.057786] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.057795] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.058521] cryptd: max_cpu_qlen set to 1000
[    0.060021] VSYS_3V3: supplied by DC_IN
[    0.060267] iommu: Default domain type: Translated 
[    0.060279] iommu: DMA domain TLB invalidation policy: strict mode 
[    0.060399] vgaarb: loaded
[    0.060565] SCSI subsystem initialized
[    0.060681] usbcore: registered new interface driver usbfs
[    0.060711] usbcore: registered new interface driver hub
[    0.060736] usbcore: registered new device driver usb
[    0.060920] mc: Linux media interface: v0.10
[    0.060940] videodev: Linux video capture interface: v2.00
[    0.060975] pps_core: LinuxPPS API ver. 1 registered
[    0.060983] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.061000] PTP clock support registered
[    0.061095] EDAC MC: Ver: 3.0.0
[    0.061383] Advanced Linux Sound Architecture Driver Initialized.
[    0.062071] clocksource: Switched to clocksource arch_sys_counter
[    0.062175] VFS: Disk quotas dquot_6.6.0
[    0.062216] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.062535] AppArmor: AppArmor Filesystem Enabled
[    0.065860] NET: Registered PF_INET protocol family
[    0.066046] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.068206] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.068249] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.068398] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.068593] TCP: Hash tables configured (established 32768 bind 32768)
[    0.068682] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.068728] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.068853] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.068883] PCI: CLS 0 bytes, default 64
[    0.069617] kvm [1]: IPA Size Limit: 40 bits
[    0.070191] kvm [1]: vgic interrupt IRQ9
[    0.070318] kvm [1]: Hyp mode initialized successfully
[    0.072522] Initialise system trusted keyrings
[    0.072612] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    0.076074] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.076274] 9p: Installing v9fs 9p2000 file system support
[    0.104344] Key type asymmetric registered
[    0.104357] Asymmetric key parser 'x509' registered
[    0.104418] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.104529] io scheduler mq-deadline registered
[    0.104540] io scheduler kyber registered
[    0.114089] soc soc0: Amlogic Meson G12B (A311D) Revision 29:b (10:2) Detected
[    0.114844] VDDCPU_A: supplied by DC_IN
[    0.114997] VDDCPU_B: supplied by VSYS_3V3
[    0.116942] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.118115] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 25, base_baud = 1500000) is a meson_uart
[    1.048116] printk: console [ttyAML0] enabled
[    1.052760] ffd24000.serial: ttyAML6 at MMIO 0xffd24000 (irq = 32, base_baud = 1500000) is a meson_uart
[    1.061817] serial serial0: tty port ttyAML6 registered
[    1.070796] loop: module loaded
[    1.071051] zram: Added device: zram0
[    1.073840] zram: Added device: zram1
[    1.077460] zram: Added device: zram2
[    1.082756] tun: Universal TUN/TAP device driver, 1.6
[    1.086336] thunder_xcv, ver 1.0
[    1.089098] thunder_bgx, ver 1.0
[    1.092292] nicpf, ver 1.0
[    1.095272] hclge is initializing
[    1.098226] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[    1.105380] hns3: Copyright (c) 2017 Huawei Corporation.
[    1.110660] e1000e: Intel(R) PRO/1000 Network Driver
[    1.115556] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.121443] igb: Intel(R) Gigabit Ethernet Network Driver
[    1.126766] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.132307] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[    1.138495] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.144449] sky2: driver version 1.30
[    1.148223] VFIO - User Level meta-driver version: 0.3
[    1.154144] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.159552] ehci-pci: EHCI PCI platform driver
[    1.163960] ehci-platform: EHCI generic platform driver
[    1.169210] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.175240] ohci-pci: OHCI PCI platform driver
[    1.179657] ohci-platform: OHCI generic platform driver
[    1.185225] usbcore: registered new interface driver uas
[    1.190104] usbcore: registered new interface driver usb-storage
[    1.196078] usbcore: registered new interface driver usbserial_generic
[    1.202504] usbserial: USB Serial support registered for generic
[    1.209447] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
[    1.216771] i2c_dev: i2c /dev entries driver
[    1.221696] Driver for 1-wire Dallas network protocol.
[    1.227742] cpufreq: cpufreq_online: CPU2: Running at unlisted initial frequency: 999999 KHz, changing to: 1000000 KHz
[    1.237415] sdhci: Secure Digital Host Controller Interface driver
[    1.242973] sdhci: Copyright(c) Pierre Ossman
[    1.246701] Synopsys Designware Multimedia Card Interface Driver
[    1.252889] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.253482] meson-gx-mmc ffe05000.sd: Got CD GPIO
[    1.262988] ledtrig-cpu: registered to indicate activity on CPUs
[    1.268988] meson-sm: secure-monitor enabled
[    1.273866] hid: raw HID events driver (C) Jiri Kosina
[    1.278283] usbcore: registered new interface driver usbhid
[    1.283660] usbhid: USB HID core driver
[    1.289151] IPVS: Registered protocols ()
[    1.291437] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[    1.298716] IPVS: ipvs loaded.
[    1.301677] IPVS: [rr] scheduler registered.
[    1.306112] NET: Registered PF_INET6 protocol family
[    1.311384] Segment Routing with IPv6
[    1.314459] In-situ OAM (IOAM) with IPv6
[    1.319107] NET: Registered PF_PACKET protocol family
[    1.323370] Bridge firewalling registered
[    1.327332] 9pnet: Installing 9P2000 support
[    1.332106] Key type dns_resolver registered
[    1.335863] Loading compiled-in X.509 certificates
[    1.340690] AppArmor: AppArmor sha1 policy hashing enabled
[    1.346311] VCC_5V: supplied by DC_IN
[    1.349768] VCC_3V3: supplied by VSYS_3V3
[    1.354217] VDDIO_AO1V8: supplied by VSYS_3V3
[    1.358649] EMMC_AO1V8: supplied by VCC_3V3
[    1.362146] USB_PWR: supplied by VCC_5V
[    1.414071] meson-drm ff900000.vpu: Queued 2 outputs on vpu
[    1.414580] meson-drm ff900000.vpu: CVBS Output connector not available
[    1.442355] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[    1.446837] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[    1.455057] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops 0xffff800008d2e688)
[    1.462013] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
[    1.470335] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
[    1.474208] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
[    1.481895] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
[    1.486475] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
[    1.493603] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[    1.500835] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    1.505969] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1
[    1.513617] xhci-hcd xhci-hcd.2.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
[    1.522868] xhci-hcd xhci-hcd.2.auto: irq 41, io mem 0xff500000
[    1.528932] hub 1-0:1.0: USB hub found
[    1.532433] hub 1-0:1.0: 2 ports detected
[    1.536519] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    1.541828] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2
[    1.549423] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
[    1.555898] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.564080] hub 2-0:1.0: USB hub found
[    1.567621] hub 2-0:1.0: 1 port detected
[    1.571738] pca953x 0-0020: using no AI
[    1.576675] meson-gx-mmc ffe03000.sd: allocated mmc-pwrseq
[    1.576797] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
[    1.579995] VCC_1V8: supplied by VCC_3V3
[    1.595138] printk: console [netcon0] enabled
[    1.595168] netconsole: network logging started
[    1.599311] ALSA device list:
[    1.601855]   #0: KHADAS-VIM3
[    1.617314] Waiting for root device PARTUUID=48617373-06...
[    1.726660] mmc2: new high speed SDIO card at address 0001
[    1.771270] mmc1: new HS200 MMC card at address 0001
[    1.772058] mmcblk1: mmc1:0001 BJTD4R 29.1 GiB 
[    1.777953]  mmcblk1: p1 p2 < p5 p6 p7 p8 p9 > p3 p4
[    1.778080] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    1.781188] mmcblk1boot0: mmc1:0001 BJTD4R 4.00 MiB 
[    1.792944] mmcblk1boot1: mmc1:0001 BJTD4R 4.00 MiB 
[    1.797883] mmcblk1rpmb: mmc1:0001 BJTD4R 4.00 MiB, chardev (240:0)
[    1.807881] VFS: Mounted root (squashfs filesystem) readonly on device 179:6.
[    1.810538] devtmpfs: mounted
[    1.813105] Freeing unused kernel memory: 2240K
[    1.817699] Run /sbin/init as init process
[    1.821068]   with arguments:
[    1.821069]     /sbin/init
[    1.821071]   with environment:
[    1.821072]     HOME=/
[    1.821073]     TERM=linux
[    1.821074]     cgroup_enable=memory
[    1.901108] systemd[1]: System time before build time, advancing clock.
[    1.925620] systemd[1]: systemd 250 running in system mode (+PAM -AUDIT -SELINUX +APPARMOR -IMA -SMACK -SECCOMP -GCRYPT -GNUTLS +OPENSSL -ACL +BLKID +CURL -ELFUTILS -FIDO2 -IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ +ZLIB -ZSTD -BPF_FRAMEWORK -XKBCOMMON -UTMP -SYSVINIT default-hierarchy=hybrid)
[    1.951078] systemd[1]: Detected architecture arm64.
[    1.972261] hub 1-1:1.0: USB hub found
[    1.974286] hub 1-1:1.0: 4 ports detected
[    1.985398] systemd[1]: Hostname set to <homeassistant>.
[    1.985578] systemd[1]: Installed transient /etc/machine-id file.
[    2.155351] systemd[1]: Queued start job for default target Multi-User System.
[    2.157552] random: systemd: uninitialized urandom read (16 bytes read)
[    2.179716] systemd[1]: Created slice Slice /system/ha-cli.
[    2.194179] random: systemd: uninitialized urandom read (16 bytes read)
[    2.197449] systemd[1]: Created slice Slice /system/modprobe.
[    2.215159] random: systemd: uninitialized urandom read (16 bytes read)
[    2.218381] systemd[1]: Created slice Slice /system/serial-getty.
[    2.238313] systemd[1]: Created slice Slice /system/systemd-fsck.
[    2.254695] systemd[1]: Created slice Slice /system/systemd-growfs.
[    2.261076] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
[    2.277191] systemd[1]: Created slice User and Session Slice.
[    2.291401] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.308255] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.324623] systemd[1]: Reached target Local Encrypted Volumes.
[    2.339241] systemd[1]: Reached target HassOS hardware targets.
[    2.354152] systemd[1]: Reached target HassOS zram targets.
[    2.368220] systemd[1]: Reached target Local Integrity Protected Volumes.
[    2.383272] systemd[1]: Reached target Path Units.
[    2.394186] systemd[1]: Reached target Remote Encrypted Volumes.
[    2.408164] systemd[1]: Reached target Remote File Systems.
[    2.422167] systemd[1]: Reached target Remote Verity Protected Volumes.
[    2.437161] systemd[1]: Reached target Slice Units.
[    2.448244] systemd[1]: Reached target Local Verity Protected Volumes.
[    2.464156] systemd[1]: Listening on D-Bus System Message Bus Socket.
[    2.482975] systemd[1]: Listening on Process Core Dump Socket.
[    2.497941] systemd[1]: Listening on Journal Audit Socket.
[    2.512460] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.526497] systemd[1]: Listening on Journal Socket.
[    2.538364] systemd[1]: Listening on udev Control Socket.
[    2.552397] systemd[1]: Listening on udev Kernel Socket.
[    2.569346] systemd[1]: Mounting Huge Pages File System...
[    2.582348] systemd[1]: Mounting POSIX Message Queue File System...
[    2.597659] systemd[1]: Kernel Debug File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/debug).
[    2.604612] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
[    2.619477] systemd[1]: Started D-Bus System Message Bus.
[    2.643943] systemd[1]: Starting Home Assistant OS Agent...
[    2.659930] systemd[1]: Starting Create List of Static Device Nodes...
[    2.677714] systemd[1]: Starting Load Kernel Module configfs...
[    2.692610] systemd[1]: Starting Load Kernel Module drm...
[    2.708734] systemd[1]: Starting Load Kernel Module fuse...
[    2.722589] fuse: init (API version 7.34)
[    2.725293] systemd[1]: Starting Journal Service...
[    2.740754] systemd[1]: Starting Generate network units from Kernel command line...
[    2.759309] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.776666] systemd[1]: Starting Wait Until Kernel Time Synchronized...
[    2.795054] systemd[1]: Starting Coldplug All udev Devices...
[    2.809570] systemd[1]: Starting Disk Manager...
[    2.823793] systemd[1]: Starting HassOS ZRAM swap...
[    2.837908] systemd[1]: Starting HassOS ZRAM tmp...
[    2.846727] zram2: detected capacity change from 0 to 32768
[    2.847203] zram0: detected capacity change from 0 to 1939832
[    2.861583] systemd[1]: Starting HassOS ZRAM var...
[    2.866347] zram1: detected capacity change from 0 to 65536
[    2.887104] systemd[1]: Started Home Assistant OS Agent.
[    2.901785] systemd[1]: Started Journal Service.
[    3.091528] audit: type=1334 audit(1646984014.189:2): prog-id=5 op=LOAD
[    3.092526] audit: type=1334 audit(1646984014.190:3): prog-id=6 op=LOAD
[    3.161039] urandom_read_iter: 67 callbacks suppressed
[    3.161054] random: systemd: uninitialized urandom read (16 bytes read)
[    3.241227] random: systemd: uninitialized urandom read (16 bytes read)
[    3.275922] random: systemd: uninitialized urandom read (16 bytes read)
[    3.361131] meson-vrtc ff8000a8.rtc: registered as rtc1
[    3.374779] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
[    3.375781] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
[    3.382190] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
[    3.389039] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[    3.395130] meson8b-dwmac ff3f0000.ethernet:     DWMAC1000
[    3.400271] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
[    3.404006] rtc-hym8563 0-0051: registered as rtc0
[    3.407677] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
[    3.407681] meson8b-dwmac ff3f0000.ethernet: COE Type 2
[    3.407684] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
[    3.407686] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
[    3.409089] panfrost ffe40000.gpu: clock rate = 24000000
[    3.413492] rtc-hym8563 0-0051: setting system clock to 2022-06-28T12:45:09 UTC (1656420309)
[    3.419983] panfrost ffe40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
[    3.425019] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
[    3.425030] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
[    3.425033] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    3.433943] systemd-journald[172]: Oldest entry in /run/log/journal/6f61b1a92e4f469b8816f131cbe9dfb7/system.journal is older than the configured file retention duration (1month), suggesting rotation.
[    3.442083] Registered IR keymap rc-khadas
[    3.443777] systemd-journald[172]: /run/log/journal/6f61b1a92e4f469b8816f131cbe9dfb7/system.journal: Journal header limits reached or header out-of-date, rotating.
[    3.466293] panfrost ffe40000.gpu: mali-g52 id 0x7212 major 0x0 minor 0x0 status 0x0
[    3.477304] rc_core: Loaded IR protocol module ir-nec-decoder, but protocol nec still not available
[    3.480094] systemd-journald[172]: Oldest entry in /run/log/journal/6f61b1a92e4f469b8816f131cbe9dfb7/system.journal is older than the configured file retention duration (1month), suggesting rotation.
[    3.487615] panfrost ffe40000.gpu: features: 00000000,13de77ff, issues: 00000000,00000400
[    3.487627] panfrost ffe40000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[    3.487633] panfrost ffe40000.gpu: shader_present=0x3 l2_present=0x1
[    3.500239] rc rc0: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0
[    3.501662] systemd-journald[172]: /run/log/journal/6f61b1a92e4f469b8816f131cbe9dfb7/system.journal: Journal header limits reached or header out-of-date, rotating.
[    3.505713] [drm] Initialized panfrost 1.2.0 20180908 for ffe40000.gpu on minor 1
[    3.520466] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.539712] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0/input1
[    3.579218] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.590071] usbcore: registered new interface driver cp210x
[    3.600260] meson-ir ff808000.ir: receiver initialized
[    3.615001] usbserial: USB Serial support registered for cp210x
[    3.647473] cp210x 1-1.1:1.0: cp210x converter detected
[    3.661835] Bluetooth: Core ver 2.22
[    3.662510] NET: Registered PF_BLUETOOTH protocol family
[    3.665941] usb 1-1.1: cp210x converter now attached to ttyUSB0
[    3.666301] Bluetooth: HCI device and connection manager initialized
[    3.678005] Bluetooth: HCI socket layer initialized
[    3.682780] Bluetooth: L2CAP socket layer initialized
[    3.687762] Bluetooth: SCO socket layer initialized
[    3.692401] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4359-sdio for chip BCM4359/9
[    3.701682] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4359-sdio.khadas,vim3.bin failed with error -2
[    3.711763] brcmfmac mmc2:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac4359-sdio.khadas,vim3.bin
[    3.721692] Bluetooth: HCI UART driver ver 2.3
[    3.726094] Bluetooth: HCI UART protocol H4 registered
[    3.731163] Bluetooth: HCI UART protocol LL registered
[    3.737179] Bluetooth: HCI UART protocol Broadcom registered
[    3.737387] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[    3.749369] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[    3.999286] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    4.088694] Bluetooth: hci0: BCM: chip id 121
[    4.089085] Bluetooth: hci0: BCM: features 0x0e
[    4.094169] Bluetooth: hci0: BCM4359C0
[    4.095660] Bluetooth: hci0: BCM4359C0 (003.001.006) build 0000
[    4.221710] urandom_read_iter: 161 callbacks suppressed
[    4.221719] random: systemd: uninitialized urandom read (16 bytes read)
[    4.232256] random: systemd-journal: uninitialized urandom read (16 bytes read)
[    4.250216] random: systemd: uninitialized urandom read (16 bytes read)
[    4.295131] EXT4-fs (mmcblk1p4): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    4.324225] Removed cp15_barrier emulation handler
[    4.324243] Enabled cp15_barrier support
[    4.399757] EXT4-fs (mmcblk1p4): resizing filesystem from 7453952 to 7453952 blocks
[    5.887298] urandom_read_iter: 15 callbacks suppressed
[    5.887307] random: systemd: uninitialized urandom read (16 bytes read)
[    5.894778] Adding 969912k swap on /dev/zram0.  Priority:-2 extents:1 across:969912k SS
[    6.899360] EXT4-fs (zram2): mounted filesystem without journal. Opts: nobarrier. Quota mode: none.
[    6.909390] EXT4-fs (zram1): mounted filesystem without journal. Opts: nobarrier. Quota mode: none.
[    7.073455] systemd-journald[172]: Received client request to flush runtime journal.
[    7.976526] audit: type=1334 audit(1656420314.062:4): prog-id=7 op=LOAD
[    7.976843] audit: type=1334 audit(1656420314.062:5): prog-id=8 op=LOAD
[    8.078968] audit: type=1334 audit(1656420314.164:6): prog-id=9 op=LOAD
[    8.079076] audit: type=1334 audit(1656420314.164:7): prog-id=10 op=LOAD
[    8.113115] random: crng init done
[    8.113126] random: 58 urandom warning(s) missed due to ratelimiting
[    8.334082] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=42)
[    8.336267] meson8b-dwmac ff3f0000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[    8.347069] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
[    8.347081] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
[    8.352026] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
[   11.452234] meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   11.452262] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   38.342673] audit: type=1400 audit(1656420344.424:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="hassio-supervisor" pid=453 comm="apparmor_parser"
[   38.342691] audit: type=1400 audit(1656420344.424:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="hassio-supervisor///usr/bin/gdbus" pid=453 comm="apparmor_parser"
[   38.342698] audit: type=1400 audit(1656420344.424:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="hassio-supervisor///usr/bin/git" pid=453 comm="apparmor_parser"
[   38.342704] audit: type=1300 audit(1656420344.424:8): arch=c00000b7 syscall=64 success=yes exit=38459 a0=6 a1=aaaac9320c60 a2=963b a3=ffff9b0cdfa0 items=0 ppid=452 pid=453 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="apparmor_parser" exe="/usr/sbin/apparmor_parser" subj==unconfined key=(null)
[   38.342710] audit: type=1327 audit(1656420344.424:8): proctitle=61707061726D6F725F706172736572002D72002D57002D4C002F6D6E742F646174612F73757065727669736F722F61707061726D6F722F6361636865002F6D6E742F646174612F73757065727669736F722F61707061726D6F722F68617373696F2D73757065727669736F72
[   39.116502] audit: type=1400 audit(1656420345.198:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=478 comm="apparmor_parser"
[   39.116523] audit: type=1300 audit(1656420345.198:9): arch=c00000b7 syscall=64 success=yes exit=7945 a0=4 a1=aaaac4656230 a2=1f09 a3=ffffa55befa0 items=0 ppid=477 pid=478 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="apparmor_parser" exe="/usr/sbin/apparmor_parser" subj==unconfined key=(null)
[   39.116548] audit: type=1327 audit(1656420345.198:9): proctitle=61707061726D6F725F706172736572002D4B72002F6D6E742F646174612F646F636B65722F746D702F646F636B65722D64656661756C7432313137363235363334
[   39.389348] audit: type=1325 audit(1656420345.466:10): table=nat family=2 entries=0 op=xt_register pid=482 subj==unconfined comm="iptables"
[   39.389383] audit: type=1300 audit(1656420345.466:10): arch=c00000b7 syscall=209 success=yes exit=0 a0=4 a1=0 a2=40 a3=ffffefdebfe0 items=0 ppid=454 pid=482 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/sbin/xtables-legacy-multi" subj==unconfined key=(null)
[   39.466227] Initializing XFRM netlink socket
[   39.731212] hassio: port 1(vetha40eb6d) entered blocking state
[   39.731235] hassio: port 1(vetha40eb6d) entered disabled state
[   39.731928] device vetha40eb6d entered promiscuous mode
[   39.734818] hassio: port 1(vetha40eb6d) entered blocking state
[   39.734835] hassio: port 1(vetha40eb6d) entered forwarding state
[   39.737387] hassio: port 1(vetha40eb6d) entered disabled state
[   40.259266] eth0: renamed from veth3f67d87
[   40.269277] IPv6: ADDRCONF(NETDEV_CHANGE): vetha40eb6d: link becomes ready
[   40.269344] hassio: port 1(vetha40eb6d) entered blocking state
[   40.269352] hassio: port 1(vetha40eb6d) entered forwarding state
[   40.269434] IPv6: ADDRCONF(NETDEV_CHANGE): hassio: link becomes ready
[   40.998461] docker0: port 1(vethfecbee8) entered blocking state
[   40.998474] docker0: port 1(vethfecbee8) entered disabled state
[   40.998834] device vethfecbee8 entered promiscuous mode
[   41.001662] docker0: port 1(vethfecbee8) entered blocking state
[   41.001678] docker0: port 1(vethfecbee8) entered forwarding state
[   41.001842] docker0: port 1(vethfecbee8) entered disabled state
[   41.030184] hassio: port 2(vethe2f701a) entered blocking state
[   41.030198] hassio: port 2(vethe2f701a) entered disabled state
[   41.030391] device vethe2f701a entered promiscuous mode
[   41.030777] hassio: port 2(vethe2f701a) entered blocking state
[   41.030787] hassio: port 2(vethe2f701a) entered forwarding state
[   41.306223] eth0: renamed from vethc2d043f
[   41.315912] hassio: port 2(vethe2f701a) entered disabled state
[   41.315998] IPv6: ADDRCONF(NETDEV_CHANGE): vethfecbee8: link becomes ready
[   41.316055] docker0: port 1(vethfecbee8) entered blocking state
[   41.316060] docker0: port 1(vethfecbee8) entered forwarding state
[   41.316122] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[   41.437412] eth1: renamed from veth844e20d
[   41.449016] IPv6: ADDRCONF(NETDEV_CHANGE): vethe2f701a: link becomes ready
[   41.449090] hassio: port 2(vethe2f701a) entered blocking state
[   41.449098] hassio: port 2(vethe2f701a) entered forwarding state
[   45.027008] kauditd_printk_skb: 229 callbacks suppressed
[   45.027018] audit: type=1334 audit(1656420351.036:87): prog-id=11 op=LOAD
[   45.027080] audit: type=1334 audit(1656420351.036:88): prog-id=12 op=LOAD
[   45.969919] audit: type=1400 audit(1656420351.966:89): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="hassio-supervisor" pid=1277 comm="apparmor_parser"
[   45.969939] audit: type=1400 audit(1656420351.966:89): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="hassio-supervisor///usr/bin/gdbus" pid=1277 comm="apparmor_parser"
[   45.969946] audit: type=1400 audit(1656420351.966:89): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="hassio-supervisor///usr/bin/git" pid=1277 comm="apparmor_parser"
[   45.969953] audit: type=1300 audit(1656420351.966:89): arch=c00000b7 syscall=64 success=yes exit=38459 a0=6 a1=aaaadae90c60 a2=963b a3=ffffbb09ffa0 items=0 ppid=1276 pid=1277 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="apparmor_parser" exe="/usr/sbin/apparmor_parser" subj==unconfined key=(null)
[   45.969962] audit: type=1327 audit(1656420351.966:89): proctitle=61707061726D6F725F706172736572002D2D7265706C616365002D2D77726974652D6361636865002D2D63616368652D6C6F63002F6D6E742F646174612F73757065727669736F722F61707061726D6F722F6361636865002F6D6E742F646174612F73757065727669736F722F61707061726D6F722F68617373696F2D737570
[   46.217107] hassio: port 3(veth98f5ee5) entered blocking state
[   46.217133] hassio: port 3(veth98f5ee5) entered disabled state
[   46.220003] device veth98f5ee5 entered promiscuous mode
[   46.220069] audit: type=1700 audit(1656420352.217:90): dev=veth98f5ee5 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[   46.220152] audit: type=1300 audit(1656420352.217:90): arch=c00000b7 syscall=206 success=yes exit=40 a0=f a1=4001236cc0 a2=28 a3=0 items=0 ppid=1 pid=454 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="dockerd" exe="/usr/bin/dockerd" subj==unconfined key=(null)
[   46.220166] audit: type=1327 audit(1656420352.217:90): proctitle=2F7573722F62696E2F646F636B657264002D480066643A2F2F002D2D6370752D72742D72756E74696D653D393530303030002D2D73746F726167652D6472697665723D6F7665726C617932002D2D6C6F672D6472697665723D6A6F75726E616C64002D2D6C6F672D6F7074007461673D7B7B2E496D6167654E616D657D7D2F7B
[   46.584052] eth0: renamed from veth9928355
[   46.593007] IPv6: ADDRCONF(NETDEV_CHANGE): veth98f5ee5: link becomes ready
[   46.593081] hassio: port 3(veth98f5ee5) entered blocking state
[   46.593089] hassio: port 3(veth98f5ee5) entered forwarding state
[   46.881806] hassio: port 4(veth6061856) entered blocking state
[   46.881820] hassio: port 4(veth6061856) entered disabled state
[   46.881953] device veth6061856 entered promiscuous mode
[   46.882175] hassio: port 4(veth6061856) entered blocking state
[   46.882182] hassio: port 4(veth6061856) entered forwarding state
[   47.228558] hassio: port 4(veth6061856) entered disabled state
[   47.274850] eth0: renamed from veth6161dd2
[   47.281918] IPv6: ADDRCONF(NETDEV_CHANGE): veth6061856: link becomes ready
[   47.282064] hassio: port 4(veth6061856) entered blocking state
[   47.282081] hassio: port 4(veth6061856) entered forwarding state
[   47.641812] hassio: port 5(veth2d91094) entered blocking state
[   47.641828] hassio: port 5(veth2d91094) entered disabled state
[   47.642056] device veth2d91094 entered promiscuous mode
[   47.642426] hassio: port 5(veth2d91094) entered blocking state
[   47.642435] hassio: port 5(veth2d91094) entered forwarding state
[   48.029881] eth0: renamed from veth2ae7448
[   48.037734] IPv6: ADDRCONF(NETDEV_CHANGE): veth2d91094: link becomes ready
[   49.283001]  fe.dai-link-0: ASoC: no backend DAIs enabled for fe.dai-link-0
[   49.285060]  fe.dai-link-0: ASoC: dpcm_fe_dai_prepare() failed (-22)
.
.
truncated
.

[   54.081705]  fe.dai-link-0: ASoC: no backend DAIs enabled for fe.dai-link-0
[   54.088267]  fe.dai-link-0: ASoC: dpcm_fe_dai_prepare() failed (-22)
[   54.094966]  fe.dai-link-0: ASoC: no backend DAIs enabled for fe.dai-link-0
[   54.101466]  fe.dai-link-0: ASoC: dpcm_fe_dai_prepare() failed (-22)
[   66.663286] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4359-sdio.bin failed with error -2
[   66.663302] brcmfmac mmc2:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac4359-sdio.bin
[   75.331320] kauditd_printk_skb: 96 callbacks suppressed
[   75.331338] audit: type=1334 audit(1656420381.278:123): prog-id=0 op=UNLOAD
[   75.331362] audit: type=1334 audit(1656420381.278:124): prog-id=0 op=UNLOAD
[   75.849433] audit: type=1334 audit(1656420381.797:125): prog-id=0 op=UNLOAD
[   75.849468] audit: type=1334 audit(1656420381.797:126): prog-id=0 op=UNLOAD
[   98.247687] hassio: port 6(vethd39eb33) entered blocking state
[   98.247703] hassio: port 6(vethd39eb33) entered disabled state
[   98.248117] device vethd39eb33 entered promiscuous mode
[   98.248174] audit: type=1700 audit(1656420404.193:127): dev=vethd39eb33 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[   98.248626] audit: type=1300 audit(1656420404.193:127): arch=c00000b7 syscall=206 success=yes exit=40 a0=f a1=4000cad920 a2=28 a3=0 items=0 ppid=1 pid=454 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="dockerd" exe="/usr/bin/dockerd" subj==unconfined key=(null)
[   98.248667] audit: type=1327 audit(1656420404.193:127): proctitle=2F7573722F62696E2F646F636B657264002D480066643A2F2F002D2D6370752D72742D72756E74696D653D393530303030002D2D73746F726167652D6472697665723D6F7665726C617932002D2D6C6F672D6472697665723D6A6F75726E616C64002D2D6C6F672D6F7074007461673D7B7B2E496D6167654E616D657D7D2F7B
[   98.292507] audit: type=1325 audit(1656420404.238:128): table=nat family=2 entries=15 op=xt_replace pid=3853 subj==unconfined comm="iptables"
[   98.292525] audit: type=1300 audit(1656420404.238:128): arch=c00000b7 syscall=208 success=yes exit=0 a0=4 a1=0 a2=40 a3=aaab14e93420 items=0 ppid=454 pid=3853 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/sbin/xtables-legacy-multi" subj==unconfined key=(null)
[   98.292534] audit: type=1327 audit(1656420404.238:128): proctitle=2F7573722F7362696E2F69707461626C6573002D2D77616974002D74006E6174002D4100444F434B4552002D7000756470002D6400302F30002D2D64706F7274003531383230002D6A00444E4154002D2D746F2D64657374696E6174696F6E003137322E33302E33332E303A35313832300000002D690068617373696F
[   98.297228] audit: type=1325 audit(1656420404.242:129): table=filter family=2 entries=30 op=xt_replace pid=3855 subj==unconfined comm="iptables"
[   98.297246] audit: type=1300 audit(1656420404.242:129): arch=c00000b7 syscall=208 success=yes exit=0 a0=4 a1=0 a2=40 a3=aaaaca371770 items=0 ppid=454 pid=3855 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/sbin/xtables-legacy-multi" subj==unconfined key=(null)
[   98.297254] audit: type=1327 audit(1656420404.242:129): proctitle=2F7573722F7362696E2F69707461626C6573002D2D77616974002D740066696C746572002D4100444F434B45520000002D690068617373696F002D6F0068617373696F002D7000756470002D64003137322E33302E33332E30002D2D64706F7274003531383230002D6A00414343455054
[   98.304095] audit: type=1325 audit(1656420404.249:130): table=nat family=2 entries=16 op=xt_replace pid=3857 subj==unconfined comm="iptables"
[   98.688685] eth0: renamed from vethca0ce20
[   98.697082] IPv6: ADDRCONF(NETDEV_CHANGE): vethd39eb33: link becomes ready
[   98.697165] hassio: port 6(vethd39eb33) entered blocking state
[   98.697172] hassio: port 6(vethd39eb33) entered forwarding state
[   99.930901] hassio: port 7(vethfde53f2) entered blocking state
[   99.930916] hassio: port 7(vethfde53f2) entered disabled state
[   99.931048] device vethfde53f2 entered promiscuous mode
[  100.500104] eth0: renamed from veth45f25e6
[  100.509368] IPv6: ADDRCONF(NETDEV_CHANGE): vethfde53f2: link becomes ready
[  100.509629] hassio: port 7(vethfde53f2) entered blocking state
[  100.509652] hassio: port 7(vethfde53f2) entered forwarding state
[  100.928832] hassio: port 8(vethe44667d) entered blocking state
[  100.928847] hassio: port 8(vethe44667d) entered disabled state
[  100.929069] device vethe44667d entered promiscuous mode
[  100.930075] hassio: port 8(vethe44667d) entered blocking state
[  100.930090] hassio: port 8(vethe44667d) entered forwarding state
[  100.933618] hassio: port 8(vethe44667d) entered disabled state

System Health information

No response

Additional information

Since the device is new, I don't know if it ever worked with HAOS, but out of curiosity I have flashed an older 7.6? version of HAOS. With it there is display for 1-2 seconds, I can see the usual kernel initialization / dmesg lines, but after that the screen goes blank, and the monitor says there is no signal.

home-assistant / operating-system

No HDMI display on Khadas VIM3 #1994