agners
commented
1 year ago After some further trial and error I've determined that having the screen connected through HDMI will make it so that it boots properly and stays on, while having no screen connected it will startup (and home assistant is briefly available), but shortly after having started everything it will shut itself down again and reboot, starting the cycle over and over again.
If a the bootup doesn't complete, the system should roll-back after 3 attempts. I assume that is not happening then? (you let it go through more than three reboots?)
Can you get the logs of the last reboot after attaching the screen?
ha host logs -b -1 -n 10000(you can redirect the output to the config directory using ha host logs -b -1 -n 10000 > /config/last-boot.log).
MidasLamb
Klumpke
Thorry84
github-actions[bot]
Describe the issue you are experiencing
I've been running home assistant on an intel nuc, everything was working fine until I updated to hassos 10.0.
To debug it I moved it to a different room where I plugged in keyboard, mouse and a screen through the HDMI port. It then started perfectly fine. Thinking it might have been a hiccup I moved it back to its original place (without any keyboard, mouse or screen attached), and immediately it started rebooting constantly.
After some further trial and error I've determined that having the screen connected through HDMI will make it so that it boots properly and stays on, while having no screen connected it will startup (and home assistant is briefly available), but shortly after having started everything it will shut itself down again and reboot, starting the cycle over and over again.
Even unplugging the screen after it's been running stable for multiple hours will cause it to shutdown a bit later and start the bootcycle.
What operating system image do you use?
generic-x86-64 (Generic UEFI capable x86-64 systems)
What version of Home Assistant Operating System is installed?
10.0
Did you upgrade the Operating System.
Yes
Steps to reproduce the issue
From what I could tell, I upgraded from the latest 9 version, and have no screen connected to the intel nuc.
Anything in the Supervisor logs that might be useful for us?
Anything in the Host logs that might be useful for us?
System information
System Information
Home Assistant Community Store
GitHub API | ok -- | -- GitHub Content | ok GitHub Web | ok GitHub API Calls Remaining | 4926 Installed Version | 1.32.1 Stage | running Available Repositories | 1267 Downloaded Repositories | 11Home Assistant Cloud
logged_in | false -- | -- can_reach_cert_server | ok can_reach_cloud_auth | ok can_reach_cloud | okHome Assistant Supervisor
host_os | Home Assistant OS 10.0 -- | -- update_channel | stable supervisor_version | supervisor-2023.04.0 agent_version | 1.5.1 docker_version | 23.0.3 disk_total | 916.2 GB disk_used | 26.2 GB healthy | true supported | true board | generic-x86-64 supervisor_api | ok version_api | ok installed_addons | Cloudflared (4.1.2), ESPHome (2023.3.2), Mosquitto broker (6.2.0), Studio Code Server (5.5.6), Matter Server (4.3.1), SQLite Web (3.7.1), chrony (2.5.0), Home Assistant Google Drive Backup (0.110.3), Terminal & SSH (9.7.0)Dashboards
dashboards | 2 -- | -- resources | 6 views | 3 mode | storageRecorder
oldest_recorder_run | April 13, 2023 at 4:06 PM -- | -- current_recorder_run | April 20, 2023 at 8:18 PM estimated_db_size | 804.76 MiB database_engine | sqlite database_version | 3.38.5Additional information
No response