search

home-assistant / operating-system

:beginner: Home Assistant Operating System
Apache License 2.0
4.79k stars 959 forks source link

Intel(R) Wi-Fi 6 AX200 firmware causing system crash and halt #2784

Closed bkallyat closed 7 months ago

bkallyat commented 11 months ago

Describe the issue you are experiencing

Hi, The HAOS crashes with error message saying "microcode SW error detected, Restarting 0x0." However, the system does not reboot and is stuck. The HA is currently running on AMD Mini PC. When the system is unreachable, I would connect this miniPC to a monitor to check the state. I would see a lot of iwlwifi errors post that microcode SW error. Have uploaded a pic of the error. iwl error-crash-AMD beelink SER5

What operating system image do you use?

generic-x86-64 (Generic UEFI capable x86-64 systems)

What version of Home Assistant Operating System is installed?

Home Assistant OS 10.5

Did you upgrade the Operating System.

Yes

Steps to reproduce the issue

  1. Start home assistant
  2. Wait 4+ hours
  3. connect the system to a monitor to view state
  4. system is stuck at a fault 9doesn't reboot) ...

Anything in the Supervisor logs that might be useful for us?

23-10-01 23:23:02 INFO (MainThread) [supervisor.homeassistant.api] Updated Home Assistant API token
23-10-01 23:27:22 INFO (MainThread) [supervisor.api.middleware.security] /os/config/sync access from a0d7b954_ssh
23-10-01 23:27:22 INFO (MainThread) [supervisor.os.manager] Synchronizing configuration from USB with Home Assistant Operating System.
23-10-01 23:27:22 INFO (MainThread) [supervisor.host.services] Restarting local service hassos-config.service
23-10-01 23:29:34 INFO (MainThread) [supervisor.hardware.monitor] Detecting add hardware /dev/bus/usb/002/002 - None
23-10-01 23:29:35 INFO (MainThread) [supervisor.hardware.monitor] Detecting add hardware /dev/sg1 - None
23-10-01 23:29:35 INFO (MainThread) [supervisor.hardware.monitor] Detecting add hardware /dev/bsg/1:0:0:0 - None
23-10-01 23:29:35 INFO (MainThread) [supervisor.hardware.monitor] Detecting add hardware /dev/sdb - /dev/disk/by-id/usb-USB_SanDisk_3.2Gen1_01015cf3c6f8e83aae7c03803322809b1ef7374b7b317e6c835537337336a351eba60000000000000000000068b755d4ff9e0700ab5581076d2cd29c-0:0
23-10-01 23:29:35 INFO (MainThread) [supervisor.hardware.monitor] Detecting add hardware /dev/sdb1 - /dev/disk/by-id/usb-USB_SanDisk_3.2Gen1_01015cf3c6f8e83aae7c03803322809b1ef7374b7b317e6c835537337336a351eba60000000000000000000068b755d4ff9e0700ab5581076d2cd29c-0:0-part1
23-10-01 23:29:43 INFO (MainThread) [supervisor.hardware.monitor] Detecting remove hardware /dev/bsg/1:0:0:0 - None
23-10-01 23:29:43 INFO (MainThread) [supervisor.hardware.monitor] Detecting remove hardware /dev/sg1 - None
23-10-01 23:29:43 INFO (MainThread) [supervisor.hardware.monitor] Detecting remove hardware /dev/sdb1 - /dev/disk/by-id/usb-USB_SanDisk_3.2Gen1_01015cf3c6f8e83aae7c03803322809b1ef7374b7b317e6c835537337336a351eba60000000000000000000068b755d4ff9e0700ab5581076d2cd29c-0:0-part1
23-10-01 23:29:43 INFO (MainThread) [supervisor.hardware.monitor] Detecting remove hardware /dev/sdb - /dev/disk/by-id/usb-USB_SanDisk_3.2Gen1_01015cf3c6f8e83aae7c03803322809b1ef7374b7b317e6c835537337336a351eba60000000000000000000068b755d4ff9e0700ab5581076d2cd29c-0:0
23-10-01 23:29:43 INFO (MainThread) [supervisor.hardware.monitor] Detecting remove hardware /dev/bus/usb/002/002 - None
23-10-01 23:30:57 INFO (MainThread) [supervisor.hardware.monitor] Detecting add hardware /dev/bus/usb/002/003 - None
23-10-01 23:30:58 INFO (MainThread) [supervisor.hardware.monitor] Detecting add hardware /dev/sg1 - None
23-10-01 23:30:58 INFO (MainThread) [supervisor.hardware.monitor] Detecting add hardware /dev/bsg/1:0:0:0 - None
23-10-01 23:30:58 INFO (MainThread) [supervisor.hardware.monitor] Detecting add hardware /dev/sdb - /dev/disk/by-id/usb-USB_SanDisk_3.2Gen1_01015cf3c6f8e83aae7c03803322809b1ef7374b7b317e6c835537337336a351eba60000000000000000000068b755d4ff9e0700ab5581076d2cd29c-0:0
23-10-01 23:30:58 INFO (MainThread) [supervisor.hardware.monitor] Detecting add hardware /dev/sdb1 - /dev/disk/by-id/usb-USB_SanDisk_3.2Gen1_01015cf3c6f8e83aae7c03803322809b1ef7374b7b317e6c835537337336a351eba60000000000000000000068b755d4ff9e0700ab5581076d2cd29c-0:0-part1
23-10-01 23:32:34 INFO (MainThread) [supervisor.hardware.monitor] Detecting remove hardware /dev/bsg/1:0:0:0 - None
23-10-01 23:32:34 INFO (MainThread) [supervisor.hardware.monitor] Detecting remove hardware /dev/sg1 - None
23-10-01 23:32:34 INFO (MainThread) [supervisor.hardware.monitor] Detecting remove hardware /dev/sdb1 - /dev/disk/by-id/usb-USB_SanDisk_3.2Gen1_01015cf3c6f8e83aae7c03803322809b1ef7374b7b317e6c835537337336a351eba60000000000000000000068b755d4ff9e0700ab5581076d2cd29c-0:0-part1
23-10-01 23:32:34 INFO (MainThread) [supervisor.hardware.monitor] Detecting remove hardware /dev/sdb - /dev/disk/by-id/usb-USB_SanDisk_3.2Gen1_01015cf3c6f8e83aae7c03803322809b1ef7374b7b317e6c835537337336a351eba60000000000000000000068b755d4ff9e0700ab5581076d2cd29c-0:0
23-10-01 23:32:34 INFO (MainThread) [supervisor.hardware.monitor] Detecting remove hardware /dev/bus/usb/002/003 - None
23-10-01 23:33:19 INFO (MainThread) [supervisor.hardware.monitor] Detecting add hardware /dev/bus/usb/002/004 - None
23-10-01 23:33:20 INFO (MainThread) [supervisor.hardware.monitor] Detecting add hardware /dev/sg1 - None
23-10-01 23:33:20 INFO (MainThread) [supervisor.hardware.monitor] Detecting add hardware /dev/bsg/1:0:0:0 - None
23-10-01 23:33:20 INFO (MainThread) [supervisor.hardware.monitor] Detecting add hardware /dev/sdb - /dev/disk/by-id/usb-USB_SanDisk_3.2Gen1_01015cf3c6f8e83aae7c03803322809b1ef7374b7b317e6c835537337336a351eba60000000000000000000068b755d4ff9e0700ab5581076d2cd29c-0:0
23-10-01 23:33:20 INFO (MainThread) [supervisor.hardware.monitor] Detecting add hardware /dev/sdb1 - /dev/disk/by-id/usb-USB_SanDisk_3.2Gen1_01015cf3c6f8e83aae7c03803322809b1ef7374b7b317e6c835537337336a351eba60000000000000000000068b755d4ff9e0700ab5581076d2cd29c-0:0-part1
23-10-01 23:34:26 INFO (MainThread) [supervisor.api.middleware.security] /os/config/sync access from a0d7b954_ssh
23-10-01 23:34:26 INFO (MainThread) [supervisor.os.manager] Synchronizing configuration from USB with Home Assistant Operating System.
23-10-01 23:34:26 INFO (MainThread) [supervisor.host.services] Restarting local service hassos-config.service
23-10-01 23:40:20 ERROR (MainThread) [supervisor.api.ingress] Stream error with http://172.30.33.0:1337/stable-2eba7af117ea58d45a6c6449ee4fe63c8d4d53aa/static/out/vs/workbench/services/keybinding/browser/keyboardLayouts/layout.contribution.win.js: Cannot write to closing transport
23-10-01 23:40:21 INFO (MainThread) [supervisor.api.proxy] Home Assistant WebSocket API request initialize
23-10-01 23:40:21 INFO (MainThread) [supervisor.api.proxy] WebSocket access from a0d7b954_vscode
23-10-01 23:40:21 INFO (MainThread) [supervisor.api.proxy] Home Assistant WebSocket API request running
23-10-01 23:41:18 INFO (MainThread) [supervisor.api.proxy] Home Assistant WebSocket API error: Received message 257:None is not WSMsgType.TEXT
23-10-01 23:41:18 INFO (MainThread) [supervisor.api.proxy] Home Assistant WebSocket API connection is closed
23-10-01 23:41:55 INFO (MainThread) [supervisor.api.middleware.security] /os/config/sync access from a0d7b954_ssh
23-10-01 23:41:55 INFO (MainThread) [supervisor.os.manager] Synchronizing configuration from USB with Home Assistant Operating System.
23-10-01 23:41:55 INFO (MainThread) [supervisor.host.services] Restarting local service hassos-config.service
23-10-01 23:42:57 INFO (MainThread) [supervisor.api.middleware.security] /network/info access from a0d7b954_ssh
23-10-01 23:42:57 INFO (MainThread) [supervisor.api.middleware.security] /network/info access from a0d7b954_ssh
23-10-01 23:42:57 INFO (MainThread) [supervisor.api.middleware.security] /host/info access from a0d7b954_ssh
23-10-01 23:42:57 INFO (MainThread) [supervisor.api.middleware.security] /core/info access from a0d7b954_ssh
23-10-01 23:52:23 INFO (MainThread) [supervisor.resolution.check] Starting system checks with state running
23-10-01 23:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for security/core
23-10-01 23:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for no_current_backup/system
23-10-01 23:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for trust/supervisor
23-10-01 23:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for dns_server_failed/dns_server
23-10-01 23:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for pwned/addon
23-10-01 23:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for multiple_data_disks/system
23-10-01 23:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for dns_server_ipv6_error/dns_server
23-10-01 23:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for docker_config/system
23-10-01 23:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for free_space/system
23-10-01 23:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for ipv4_connection_problem/system
23-10-01 23:52:23 INFO (MainThread) [supervisor.resolution.check] System checks complete
23-10-01 23:52:23 INFO (MainThread) [supervisor.resolution.evaluate] Starting system evaluation with state running
23-10-01 23:52:23 INFO (MainThread) [supervisor.resolution.evaluate] System evaluation complete
23-10-01 23:52:23 INFO (MainThread) [supervisor.resolution.fixup] Starting system autofix at state running
23-10-01 23:52:23 INFO (MainThread) [supervisor.resolution.fixup] System autofix complete
23-10-01 23:53:04 INFO (MainThread) [supervisor.homeassistant.api] Updated Home Assistant API token
23-10-02 00:23:06 INFO (MainThread) [supervisor.homeassistant.api] Updated Home Assistant API token
23-10-02 00:52:23 INFO (MainThread) [supervisor.resolution.check] Starting system checks with state running
23-10-02 00:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for security/core
23-10-02 00:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for no_current_backup/system
23-10-02 00:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for trust/supervisor
23-10-02 00:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for dns_server_failed/dns_server
23-10-02 00:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for pwned/addon
23-10-02 00:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for multiple_data_disks/system
23-10-02 00:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for dns_server_ipv6_error/dns_server
23-10-02 00:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for docker_config/system
23-10-02 00:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for free_space/system
23-10-02 00:52:23 INFO (MainThread) [supervisor.resolution.checks.base] Run check for ipv4_connection_problem/system
23-10-02 00:52:23 INFO (MainThread) [supervisor.resolution.check] System checks complete
23-10-02 00:52:23 INFO (MainThread) [supervisor.resolution.evaluate] Starting system evaluation with state running
23-10-02 00:52:23 INFO (MainThread) [supervisor.resolution.evaluate] System evaluation complete
23-10-02 00:52:23 INFO (MainThread) [supervisor.resolution.fixup] Starting system autofix at state running
23-10-02 00:52:23 INFO (MainThread) [supervisor.resolution.fixup] System autofix complete
23-10-02 00:53:09 INFO (MainThread) [supervisor.homeassistant.api] Updated Home Assistant API token
23-10-02 00:53:14 INFO (MainThread) [supervisor.updater] Fetching update data from https://version.home-assistant.io/stable.json

Anything in the Host logs that might be useful for us?

Oct 01 12:27:22 homeassistant systemd[1]: hassos-config.service: Deactivated successfully.
Oct 01 12:27:22 homeassistant systemd[1]: Finished HassOS Configuration Manager.
Oct 01 12:29:32 homeassistant kernel: usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
Oct 01 12:29:32 homeassistant kernel: usb 2-2: New USB device found, idVendor=0781, idProduct=55ab, bcdDevice= 1.00
Oct 01 12:29:32 homeassistant kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct 01 12:29:32 homeassistant kernel: usb 2-2: Product:  SanDisk 3.2Gen1
Oct 01 12:29:32 homeassistant kernel: usb 2-2: Manufacturer:  USB
Oct 01 12:29:32 homeassistant kernel: usb 2-2: SerialNumber: 01015cf3c6f8e83aae7c03803322809b1ef7374b7b317e6c835537337336a351eba60000000000000000000068b755d4ff9e0700ab5581076d2cd29c
Oct 01 12:29:32 homeassistant kernel: usb-storage 2-2:1.0: USB Mass Storage device detected
Oct 01 12:29:32 homeassistant kernel: scsi host1: usb-storage 2-2:1.0
Oct 01 12:29:33 homeassistant kernel: scsi 1:0:0:0: Direct-Access      USB      SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
Oct 01 12:29:33 homeassistant kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Oct 01 12:29:33 homeassistant kernel: sd 1:0:0:0: [sdb] 1930199040 512-byte logical blocks: (988 GB/920 GiB)
Oct 01 12:29:33 homeassistant kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 01 12:29:33 homeassistant kernel: sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00
Oct 01 12:29:33 homeassistant kernel: sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Oct 01 12:29:33 homeassistant kernel:  sdb: sdb1
Oct 01 12:29:33 homeassistant kernel: sd 1:0:0:0: [sdb] Attached SCSI removable disk
Oct 01 12:29:43 homeassistant kernel: usb 2-2: USB disconnect, device number 2
Oct 01 12:30:55 homeassistant kernel: usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
Oct 01 12:30:55 homeassistant kernel: usb 2-2: New USB device found, idVendor=0781, idProduct=55ab, bcdDevice= 1.00
Oct 01 12:30:55 homeassistant kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct 01 12:30:55 homeassistant kernel: usb 2-2: Product:  SanDisk 3.2Gen1
Oct 01 12:30:55 homeassistant kernel: usb 2-2: Manufacturer:  USB
Oct 01 12:30:55 homeassistant kernel: usb 2-2: SerialNumber: 01015cf3c6f8e83aae7c03803322809b1ef7374b7b317e6c835537337336a351eba60000000000000000000068b755d4ff9e0700ab5581076d2cd29c
Oct 01 12:30:55 homeassistant kernel: usb-storage 2-2:1.0: USB Mass Storage device detected
Oct 01 12:30:55 homeassistant kernel: scsi host1: usb-storage 2-2:1.0
Oct 01 12:30:56 homeassistant kernel: scsi 1:0:0:0: Direct-Access      USB      SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
Oct 01 12:30:56 homeassistant kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Oct 01 12:30:56 homeassistant kernel: sd 1:0:0:0: [sdb] 1930199040 512-byte logical blocks: (988 GB/920 GiB)
Oct 01 12:30:56 homeassistant kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 01 12:30:56 homeassistant kernel: sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00
Oct 01 12:30:56 homeassistant kernel: sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Oct 01 12:30:56 homeassistant kernel:  sdb: sdb1
Oct 01 12:30:56 homeassistant kernel: sd 1:0:0:0: [sdb] Attached SCSI removable disk
Oct 01 12:32:34 homeassistant kernel: usb 2-2: USB disconnect, device number 3
Oct 01 12:33:17 homeassistant kernel: usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd
Oct 01 12:33:17 homeassistant kernel: usb 2-2: New USB device found, idVendor=0781, idProduct=55ab, bcdDevice= 1.00
Oct 01 12:33:17 homeassistant kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct 01 12:33:17 homeassistant kernel: usb 2-2: Product:  SanDisk 3.2Gen1
Oct 01 12:33:17 homeassistant kernel: usb 2-2: Manufacturer:  USB
Oct 01 12:33:17 homeassistant kernel: usb 2-2: SerialNumber: 01015cf3c6f8e83aae7c03803322809b1ef7374b7b317e6c835537337336a351eba60000000000000000000068b755d4ff9e0700ab5581076d2cd29c
Oct 01 12:33:17 homeassistant kernel: usb-storage 2-2:1.0: USB Mass Storage device detected
Oct 01 12:33:17 homeassistant kernel: scsi host1: usb-storage 2-2:1.0
Oct 01 12:33:18 homeassistant kernel: scsi 1:0:0:0: Direct-Access      USB      SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
Oct 01 12:33:18 homeassistant kernel: sd 1:0:0:0: [sdb] 1930199040 512-byte logical blocks: (988 GB/920 GiB)
Oct 01 12:33:18 homeassistant kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Oct 01 12:33:18 homeassistant kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 01 12:33:18 homeassistant kernel: sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00
Oct 01 12:33:18 homeassistant kernel: sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Oct 01 12:33:18 homeassistant kernel:  sdb: sdb1
Oct 01 12:33:18 homeassistant kernel: sd 1:0:0:0: [sdb] Attached SCSI removable disk
Oct 01 12:34:26 homeassistant systemd[1]: Starting HassOS Configuration Manager...
Oct 01 12:34:26 homeassistant hassos-config[11179]: [Info] Use USB stick for import CONFIG
Oct 01 12:34:26 homeassistant systemd[1]: Mounting HassOS config partition...
Oct 01 12:34:26 homeassistant mount[11182]: mount: /mnt/config: unknown filesystem type 'exfat'.
Oct 01 12:34:26 homeassistant mount[11182]:        dmesg(1) may have more information after failed mount system call.
Oct 01 12:34:26 homeassistant systemd[1]: mnt-config.mount: Mount process exited, code=exited, status=32/n/a
Oct 01 12:34:26 homeassistant systemd[1]: mnt-config.mount: Failed with result 'exit-code'.
Oct 01 12:34:26 homeassistant systemd[1]: Failed to mount HassOS config partition.
Oct 01 12:34:26 homeassistant hassos-config[11179]: [Error] Can't mount config partition
Oct 01 12:34:26 homeassistant systemd[1]: hassos-config.service: Main process exited, code=exited, status=1/FAILURE
Oct 01 12:34:26 homeassistant systemd[1]: hassos-config.service: Failed with result 'exit-code'.
Oct 01 12:34:26 homeassistant systemd[1]: Failed to start HassOS Configuration Manager.
Oct 01 12:41:55 homeassistant systemd[1]: Starting HassOS Configuration Manager...
Oct 01 12:41:55 homeassistant hassos-config[12874]: [Info] Use USB stick for import CONFIG
Oct 01 12:41:55 homeassistant systemd[1]: Mounting HassOS config partition...
Oct 01 12:41:55 homeassistant mount[12877]: mount: /mnt/config: unknown filesystem type 'exfat'.
Oct 01 12:41:55 homeassistant mount[12877]:        dmesg(1) may have more information after failed mount system call.
Oct 01 12:41:55 homeassistant systemd[1]: mnt-config.mount: Mount process exited, code=exited, status=32/n/a
Oct 01 12:41:55 homeassistant systemd[1]: mnt-config.mount: Failed with result 'exit-code'.
Oct 01 12:41:55 homeassistant systemd[1]: Failed to mount HassOS config partition.
Oct 01 12:41:55 homeassistant hassos-config[12874]: [Error] Can't mount config partition
Oct 01 12:41:55 homeassistant systemd[1]: hassos-config.service: Main process exited, code=exited, status=1/FAILURE
Oct 01 12:41:55 homeassistant systemd[1]: hassos-config.service: Failed with result 'exit-code'.
Oct 01 12:41:55 homeassistant systemd[1]: Failed to start HassOS Configuration Manager.
Oct 01 13:52:21 homeassistant NetworkManager[574]: <info>  [1696168341.3750] dhcp4 (wlo1): state changed new lease, address=192.168.1.115
Oct 01 13:59:54 homeassistant kernel: audit: type=1334 audit(1696168794.165:257): prog-id=73 op=LOAD
Oct 01 13:59:54 homeassistant kernel: audit: type=1334 audit(1696168794.165:258): prog-id=74 op=LOAD
Oct 01 13:59:54 homeassistant kernel: audit: type=1334 audit(1696168794.165:259): prog-id=75 op=LOAD
Oct 01 13:59:54 homeassistant systemd[1]: Starting Hostname Service...
Oct 01 13:59:54 homeassistant systemd[1]: Started Hostname Service.
Oct 01 13:59:54 homeassistant kernel: audit: type=1334 audit(1696168794.292:260): prog-id=76 op=LOAD
Oct 01 13:59:54 homeassistant kernel: audit: type=1334 audit(1696168794.292:261): prog-id=77 op=LOAD
Oct 01 13:59:54 homeassistant kernel: audit: type=1334 audit(1696168794.292:262): prog-id=78 op=LOAD
Oct 01 13:59:54 homeassistant systemd[1]: Starting Time & Date Service...
Oct 01 13:59:54 homeassistant systemd[1]: Started Time & Date Service.
Oct 01 14:00:24 homeassistant systemd[1]: systemd-hostnamed.service: Deactivated successfully.
Oct 01 14:00:24 homeassistant kernel: audit: type=1334 audit(1696168824.367:263): prog-id=75 op=UNLOAD
Oct 01 14:00:24 homeassistant kernel: audit: type=1334 audit(1696168824.367:264): prog-id=74 op=UNLOAD
Oct 01 14:00:24 homeassistant kernel: audit: type=1334 audit(1696168824.367:265): prog-id=73 op=UNLOAD
Oct 01 14:00:24 homeassistant systemd[1]: systemd-timedated.service: Deactivated successfully.
Oct 01 14:00:24 homeassistant kernel: audit: type=1334 audit(1696168824.460:266): prog-id=78 op=UNLOAD
Oct 01 14:00:24 homeassistant kernel: audit: type=1334 audit(1696168824.460:267): prog-id=77 op=UNLOAD
Oct 01 14:00:24 homeassistant kernel: audit: type=1334 audit(1696168824.460:268): prog-id=76 op=UNLOAD
Oct 01 14:01:31 homeassistant kernel: audit: type=1334 audit(1696168891.119:269): prog-id=79 op=LOAD
Oct 01 14:01:31 homeassistant systemd-timesyncd[1466]: Network configuration changed, trying to establish connection.
Oct 01 14:01:31 homeassistant systemd-timesyncd[1466]: Contacted time server 192.168.0.1:123 (192.168.0.1).
Oct 01 14:01:31 homeassistant systemd[1]: Started Journal Gateway Service.
Oct 01 14:01:31 homeassistant systemd-journal-gatewayd[24289]: microhttpd: MHD_OPTION_EXTERNAL_LOGGER is not the first option specified for the daemon. Some messages may be printed by the standard MHD logger.
Oct 01 14:02:07 homeassistant kernel: usb 2-2: USB disconnect, device number 4

System information

System Information

version core-2023.9.3
installation_type Home Assistant OS
dev false
hassio true
docker true
user root
virtualenv false
python_version 3.11.5
os_name Linux
os_version 6.1.45
arch x86_64
timezone Australia/Sydney
config_dir /config
Home Assistant Cloud logged_in | true -- | -- subscription_expiration | October 6, 2023 at 11:00 AM relayer_connected | true relayer_region | ap-southeast-1 remote_enabled | true remote_connected | true alexa_enabled | false google_enabled | true remote_server | ap-southeast-1-0.ui.nabu.casa certificate_status | ready can_reach_cert_server | ok can_reach_cloud_auth | ok can_reach_cloud | ok
Home Assistant Supervisor host_os | Home Assistant OS 10.5 -- | -- update_channel | stable supervisor_version | supervisor-2023.09.2 agent_version | 1.5.1 docker_version | 23.0.6 disk_total | 1833.1 GB disk_used | 9.5 GB healthy | true supported | true board | generic-x86-64 supervisor_api | ok version_api | ok installed_addons | Studio Code Server (5.11.0), Home Assistant Google Drive Backup (0.111.1), Matter Server (4.9.0), Silicon Labs Multiprotocol (2.3.2), Advanced SSH & Web Terminal (15.0.8)
Dashboards dashboards | 1 -- | -- resources | 0 views | 1 mode | storage
Recorder oldest_recorder_run | September 20, 2023 at 5:33 PM -- | -- current_recorder_run | October 1, 2023 at 10:52 PM estimated_db_size | 13.94 MiB database_engine | sqlite database_version | 3.41.2
Spotify api_endpoint_reachable | ok -- | --

Additional information

iwl error-crash-AMD beelink SER5

agners commented 11 months ago

This looks like some upstream iwlwifi issue. By searching the string Microcode SW error detected. Restarting 0x0. this problem seems to happen also on other operating systems at times. What some people suggest is to set iwlwifi options, specifically 11n_disable=1 and bt_coex_active=0. You can set such options by editing cmdline.txt on the boot partition (/mnt/boot). Currently you have to edit this file directly on the OS shell (which you can access by using login on the terminal).

bkallyat commented 11 months ago

Thanks. Will set those options and update if this workaround works.

bkallyat commented 11 months ago

Didn't work. Crashed in few hours.

20231005_003756

bkallyat commented 11 months ago

Any other ideas anyone have to resolve this? This crash is basically making my Home Assistant setup useless. All my automation is dead 😖

bkallyat commented 10 months ago

@agners Can the HAOS be updated to include the new Intel Wifi firmwares? It may possibly resolve this bug. https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git

github-actions[bot] commented 7 months ago

There hasn't been any activity on this issue recently. To keep our backlog manageable we have to clean old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant OS version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.