HA OS 11.1 Fresh Install Raspberry Pi 4 USB SSD Disk boot loop

[mlinko6]

Describe the issue you are experiencing

The installation gets stuck in a boot loop and there is only black screen, I've tried it three times, but I didn't have any success.

What operating system image do you use?

rpi4-64 (Raspberry Pi 4/400 64-bit OS)

What version of Home Assistant Operating System is installed?

11.1

Did you upgrade the Operating System.

No

Steps to reproduce the issue

1. 2. 3. ... Fresh install of the Image "haos_rpi4-64-11.1.img.xz" it works on the SD Card, but it doesn't work on USB SSD Disk. I've also copied the SD Card to the SSD Disk with the Image copier but it didn't work either - similar issue: black screen at the end.

Errors from starting the SSD Disk with the SD Card image:

Anything in the Supervisor logs that might be useful for us?

no logs to get

Anything in the Host logs that might be useful for us?

no logs to get

System information

Raspberry Pi 4

Additional information

No response

[sairon]

What model of the USB disk are you using? Can you try plugging it to a different PC and getting its USB VID/PID?

[mlinko6]

Hi Jan,

Thx for the response. I’m using a Samsung Pro 128GB SSD - as soon as I connected the SSD Drive to USB 2.0 it was working without as Problem… I assume that the disk drains more “power” over 3.0 USB and the Pi is not willing to “give” it… I’m using the original Pi usb C charger… I didn’t investigate any further…

KR Rok

---

From: Jan Čermák @.> Sent: Wednesday, November 22, 2023 4:01:06 PM To: home-assistant/operating-system @.> Cc: mlinko6 @.>; Author @.> Subject: Re: [home-assistant/operating-system] HA OS 11.1 Fresh Install Raspberry Pi 4 USB SSD Disk boot loop (Issue #2932)

What model of the USB disk are you using? Can you try plugging it to a different PC and getting its USB VID/PID?

— Reply to this email directly, view it on GitHubhttps://github.com/home-assistant/operating-system/issues/2932#issuecomment-1822934757, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AUMF4ST3H4M4OAEU6QL4MDLYFYHTFAVCNFSM6AAAAAA7OHPWRWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRSHEZTINZVG4. You are receiving this because you authored the thread.Message ID: @.***>

[Coremac]

I have the same Issue, boot from SSD only works on the USB 2.0 ports since the update. Same issue with a differen adapter.

[github-actions[bot]]

There hasn't been any activity on this issue recently. To keep our backlog manageable we have to clean old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant OS version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.