Closed jires closed 1 month ago
I'm having a similar issue, after upgrading to 11.2 my usb Zwave hub is no longer recognized.
In my case, it is the SkyConnect stick that stops working after a few hours and the problem can only be solved by unplugging it and plugging it in again. A downgrade to 11.1 solved the problem for me.
Can confirm that downgrading to 11.1 and then unplugging and replugging in the dongle (Aeotec z-stick Gen 5) fixes the issue.
On my RPI 3b+ downgrading to 11.1 (ha os update --version 11.1) directly fixed the issue with Z-Wave USB Stick (ZMEEUZB1).
Same as all, I upgraded to OS 11.2 Zwave stop working as the stick was no more detected. I downgraded to OS 11.1, stick is back online.
Also related #2977
We suspect it could be caused by some regression in the stable kernel, because at the same time similar issues started to appear on RPi and x86 platforms. There is bunch of changes in the USB subsystem in the newer stable releases which are currently in the development branch. If there's someone willing to switch to the dev
channel and test it, it will help a lot (but make sure you have backups, since it switches all the components to dev
and things can go south much more often).
ha supervisor options --channel=dev
ha supervisor reload
ha supervisor update
ha os update
Otherwise there should be another beta release soon, we will appreciate early feedback after the release too.
Since OS 11.3.rc1 is out for a while already, has anyone been able to check if the problem persists there?
I also noticed that with OS 11.3.rc1 but for me it just took longer until the error reappeared, it just depends on how long there is no restart.
We suspect it could be caused by some regression in the stable kernel, because at the same time similar issues started to appear on RPi and x86 platforms. There is bunch of changes in the USB subsystem in the newer stable releases which are currently in the development branch. If there's someone willing to switch to the
dev
channel and test it, it will help a lot (but make sure you have backups, since it switches all the components todev
and things can go south much more often).ha supervisor options --channel=dev ha supervisor reload ha supervisor update ha os update
Otherwise there should be another beta release soon, we will appreciate early feedback after the release too.
I will try this tomorrow morning and will keep you posted if it works.
@mcolyer @sblogoshs @ohessel @bnounours @llroelj do you see the same device descriptor read errors as the original poster?
@bnounours which stick are you using?
@mcolyer @sblogoshs @ohessel @bnounours @llroelj do you see the same device descriptor read errors as the original poster?
@bnounours which stick are you using?
After going through the above mentioned steps I am having the same error as mentioned above and the one I had before downgrading to 11.1
usb 1-1.1.2: device descriptor read/64, error -32
I see in the Z-Wave JS addon also the same error popping up: " Driver: Failed to open the serial port: Error: No such file or directory, cannot open /dev/serial/by-id/usb-0658_0200-if00 (ZW0100)"
Currently I am running the following versions:
Core: 2023.12.3 Supervisor: 2024.01.0.dev0201 Operating System: 11.4.dev20231226 Frontend: 20231208.2
@llroelj so you are saying you had the device descriptor read with 11.2 as well as the OS version from the dev channel?
What (exact) hardware are you running HAOS on?
@llroelj so you are saying you had the device descriptor read with 11.2 as well as the OS version from the dev channel?
What (exact) hardware are you running HAOS on?
Indeed I had the same message in 11.2 and now the dev channel. With both the zwave stick cannot be found by the system itself (no serial folder). If needed I can share my dmesg log with all information.
I am running HAOS on a RPi3 B+ 1GB memory installed on a SanDisk Ultra 32GB microSDHC card The Zwave USB stick is a Z-Wave.me Stick (ZMEEUZB1)
My problems with USB is solved now after upgrading to HAOS 11.3. I had problems with ConbeeII zigbee dongle not being detected. This is possibly another issue but worth trying 11.3 as I see a couple of kernel USB fixes.
With the final version OS 11.3 the error seems to be fixed, but due to various updates I haven't had 24 hours without a restart yet, I hope that it will still work.
I can tell that upgrade to OS 11.3 DID NOT FIXED (? or did?) the issue with Z-Wave.me UZB. Descriptor error is still coming, however it's looks like that dongle is working as expected Log output from host, after plugin dongle in the usb port, when system reboted with dongle plugged in, there is no errors in the log:
Jan 07 12:04:09 homeassistanttest kernel: usb 1-1.3: new full-speed USB device number 6 using xhci_hcd
Jan 07 12:04:09 homeassistanttest kernel: usb 1-1.3: device descriptor read/64, error -32
Jan 07 12:04:09 homeassistanttest kernel: usb 1-1.3: device descriptor read/64, error -32
Jan 07 12:04:10 homeassistanttest kernel: usb 1-1.3: new full-speed USB device number 7 using xhci_hcd
Jan 07 12:04:10 homeassistanttest kernel: usb 1-1.3: device descriptor read/64, error -32
Jan 07 12:04:10 homeassistanttest kernel: usb 1-1.3: device descriptor read/64, error -32
Jan 07 12:04:10 homeassistanttest kernel: usb 1-1-port3: attempt power cycle
Jan 07 12:04:11 homeassistanttest kernel: usb 1-1.3: new full-speed USB device number 8 using xhci_hcd
Jan 07 12:04:11 homeassistanttest kernel: usb 1-1.3: New USB device found, idVendor=0658, idProduct=0200, bcdDevice= 0.00
Jan 07 12:04:11 homeassistanttest kernel: usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan 07 12:04:11 homeassistanttest kernel: cdc_acm 1-1.3:1.0: ttyACM0: USB ACM device
I have the same on my HA Yellow. When upgrading to 11.2 or 11.3 my UZB Zwave stick cannot be found anymore. No usb device available. When downgrading to 11.1, everything works again. I have tried the upgrade three times, but no luck. I hope this can be fixed in next release.
@agners I did not download the logs, and the journal of the error is rotated away already. If it helps, I could update again (or better setup a clone, as I don't want to break my system) and see if those exact logs appear.
I'm in the same situation, with 2 different Zwave devices. Now running 11.4OS
@afaucogney So you're saying 11.4 has the same issue?
@ohessel Yes it seems the same issue. I have reboot to be certain that everything is clear, but then I canot find my usb stick in the all_hardware list And ZWaveJS is not able to talk to the controller. Should it work with that version ?
@sairon can you please add the board/yellow label as well? I have this issue on the yellow (see earlier post).
Is there some activity on this topic, or do you need some information/log to help you ?
I finally got my hands on the UZB stick to test myself. What should be noted is that the device descriptor read
messages appear to be a red herring - I get them every time the device is hotplugged, and I get them on other kernels/distros too - I assume it's caused by a HW design fault that the device appears on the USB bus before it's properly initialized. The following lines (starting with New USB device found ...
) indicate it's loaded properly in the end.
So far the device works for me on 11.2 through 11.4, so there must be something different on the problematic devices. For those who have the issues, can you share a bit more info?
dmesg
output or host logs.I had this issue after upgrading to 11.2 so I stayed on 11.1 for now. Will try 11.4 and see what happens.
Running Home assistant on a Yellow. UZB firmware 5.27.
If i remember correctly the device never showed up after cold booting
Problem still persists in 11.4 Here is the output of dmesg | grep -i usb: [ 0.112239] usbcore: registered new interface driver usbfs [ 0.112302] usbcore: registered new interface driver hub [ 0.112374] usbcore: registered new device driver usb [ 0.112728] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 1.449922] usbcore: registered new interface driver uas [ 1.450005] usbcore: registered new interface driver usb-storage [ 1.450107] usbcore: registered new interface driver usbserial_generic [ 1.450150] usbserial: USB Serial support registered for generic [ 1.462440] usbcore: registered new interface driver usbhid [ 1.462450] usbhid: USB HID core driver [ 6.225448] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator [ 6.298391] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator [ 6.546981] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM [ 6.555240] dwc2 fe980000.usb: DWC OTG Controller [ 6.567977] dwc2 fe980000.usb: new USB bus registered, assigned bus number 1 [ 6.575236] dwc2 fe980000.usb: irq 46, io mem 0xfe980000 [ 6.580794] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 6.589347] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.596674] usb usb1: Product: DWC OTG Controller [ 6.601449] usb usb1: Manufacturer: Linux 6.1.63-haos-raspi dwc2_hsotg [ 6.616774] usb usb1: SerialNumber: fe980000.usb [ 6.636862] hub 1-0:1.0: USB hub found [ 7.034989] usb 1-1: new high-speed USB device number 2 using dwc2 [ 7.247798] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00 [ 7.261414] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 7.275315] usb 1-1: Product: USB 2.0 Hub [MTT] [ 7.304109] hub 1-1:1.0: USB hub found [ 7.775013] usb 1-1.1: new full-speed USB device number 3 using dwc2 [ 7.974937] usb 1-1.1: device descriptor read/64, error -32 [ 8.286902] usb 1-1.1: device descriptor read/64, error -32 [ 8.602957] usb 1-1.1: new full-speed USB device number 4 using dwc2 [ 8.802978] usb 1-1.1: device descriptor read/64, error -32 [ 9.114943] usb 1-1.1: device descriptor read/64, error -32 [ 9.227169] usb 1-1-port1: attempt power cycle [ 9.934939] usb 1-1.1: new full-speed USB device number 5 using dwc2 [ 9.959294] usb 1-1.1: device descriptor read/8, error -32 [ 10.095291] usb 1-1.1: device descriptor read/8, error -32 [ 10.386948] usb 1-1.1: new full-speed USB device number 6 using dwc2 [ 10.407313] usb 1-1.1: device descriptor read/8, error -32 [ 10.539288] usb 1-1.1: device descriptor read/8, error -32 [ 10.651088] usb 1-1-port1: unable to enumerate USB device [ 10.854957] usb 1-1.2: new full-speed USB device number 7 using dwc2 [ 11.077618] usb 1-1.2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 [ 11.077645] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 11.077663] usb 1-1.2: Product: ConBee II [ 11.077678] usb 1-1.2: Manufacturer: dresden elektronik ingenieurtechnik GmbH [ 11.077692] usb 1-1.2: SerialNumber: DE2215099 [ 11.232100] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device [ 11.232189] usbcore: registered new interface driver cdc_acm [ 11.232196] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 11.431673] usb 1-1.2: USB disconnect, device number 7 [ 11.754923] usb 1-1.2: new full-speed USB device number 8 using dwc2 [ 11.977619] usb 1-1.2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 [ 11.977648] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 11.977666] usb 1-1.2: Product: ConBee II [ 11.977681] usb 1-1.2: Manufacturer: dresden elektronik ingenieurtechnik GmbH [ 11.977695] usb 1-1.2: SerialNumber: DE2215099 [ 11.979327] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device
Hi,
I use the HA yellow with firmware 5.5 for the Zwave stick + HA OS 11.4 I have also tried with another purchased stick that I return back, because it changed nothing (no info about the firmware, but should be recent) I get some info in the Zwave integration, but the ZWaveJS failed to start. I do not see it in the "all-hardware" list. I didn't tested recently with hot-plugging ? does it make sens to help you ?
Anthony
Has anyone tried HAOS 11.5 with regard to this issue? Was there any change in it that could fix this?
Just tried 11.5 jump from 11.1 and my Z-Wave.Me stick went missing... Reverted to 11.1 and it's back
FWIW, after a full backup of my uSD card, I upgraded from 11.3 to 11.5 and everything still seems to work fine. I'm running HaOS on RPi2 with this stick:
Maybe it depends on the firmware version of the stick?
@LeSpocky Have you had any problems before or were you just hesitating to upgrade? There is definitely some factor we are missing, given there are some - but not that many - reports of the issue, and no one from the team is able to reproduce it with their Z-Wave UZB or Aeotec Z-Stick :(
@sairon, I have a spare uzb that I updated to the last fw but also doesn’t work. I would be happy to provide this one to someone of the team.
@MUN0X Thanks, but before we go this route, could you (or anyone else with the issue) verify this happens reproducibly with the same stick even with a fresh HAOS install, or even better, on a different different machine at all? This can be any Raspberry Pi as well - since we track the same issue for RPi in #2977.
@LeSpocky Have you had any problems before or were you just hesitating to upgrade? There is definitely some factor we are missing, given there are some - but not that many - reports of the issue, and no one from the team is able to reproduce it with their Z-Wave UZB or Aeotec Z-Stick :(
Actually I hesitated and waited with the upgrade until I had time for a full backup. In general that v5 stick works okay, at least it is recognized by the OS reliably. I have other problems with Z-Wave (devices like thermostats not responding or disappearing for a while then coming back), but I don't think they are related to this ticket.
I believe i have a spare rpi3 laying around. Will test my spare stick on a fresh install this weekend.
I am suffering from the same problem. I have an rpi3 and a Z-wave.me UZB stick. The UZB stick is a few years old, but I have updated it to the latest firmware by using the flashing function in the Z-Way program.
When booting in HAOS 11.1 I get the following (relevant) dmesg outputs:
[ 2.932896] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 2.936627] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.939563] hub 1-1:1.0: USB hub found [ 2.941578] hub 1-1:1.0: 5 ports detected [ 3.226381] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 3.316778] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 3.320470] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.401415] usb 1-1.3: new high-speed USB device number 4 using dwc_otg [ 3.493420] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0605, bcdDevice= 6.0b [ 3.497333] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.499434] usb 1-1.3: Product: USB2.0 Hub [ 3.502488] hub 1-1.3:1.0: USB hub found [ 3.504450] hub 1-1.3:1.0: 4 ports detected [ 3.583414] usb 1-1.4: new full-speed USB device number 5 using dwc_otg [ 3.661427] usb 1-1.4: device descriptor read/64, error -32 [ 3.842413] usb 1-1.4: device descriptor read/64, error -32 [ 4.026413] usb 1-1.4: new full-speed USB device number 6 using dwc_otg [ 4.104381] usb 1-1.4: device descriptor read/64, error -32 [ 4.290401] usb 1-1.4: device descriptor read/64, error -32 [ 4.398521] usb 1-1-port4: attempt power cycle [ 4.464389] usb 1-1.3.1: new high-speed USB device number 7 using dwc_otg [ 4.543783] usb 1-1.3.1: New USB device found, idVendor=152d, idProduct=0579, bcdDevice= 5.06 [ 4.547404] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.551014] usb 1-1.3.1: Product: Portable SSD [ 4.552836] usb 1-1.3.1: Manufacturer: Intenso [ 4.554480] usb 1-1.3.1: SerialNumber: 2023061530809 [ 4.555910] usb 1-1.3.1: UAS is ignored for this device, using usb-storage instead [ 4.557692] usb-storage 1-1.3.1:1.0: USB Mass Storage device detected [ 4.559043] usb-storage 1-1.3.1:1.0: Quirks match for vid 152d pid 0579: 800000 [ 4.560117] scsi host0: usb-storage 1-1.3.1:1.0 [ 4.625423] usb 1-1.3.4: new low-speed USB device number 8 using dwc_otg [ 5.186383] usb 1-1.4: new full-speed USB device number 9 using dwc_otg [ 5.204004] usb 1-1.4: New USB device found, idVendor=0658, idProduct=0200, bcdDevice= 0.00 [ 5.207004] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.285414] usb 1-1.5: new high-speed USB device number 10 using dwc_otg
The UZB is connected to usb 1-1.4. You can clearly see that at first the communication does not work (error 32 = broken pipe), but after it says "attempt power cycle", it manage to start talking and identify the UZB successfully, and then a bit later it assigns it to ttyACM0:
[ 8.414781] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device
If I with the same hardware setup instead boot HAOS 12.0 I can see this with dmesg:
[ 2.837201] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 2.840845] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.843422] hub 1-1:1.0: USB hub found [ 2.845420] hub 1-1:1.0: 5 ports detected [ 3.132868] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 3.223187] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 3.226855] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.307871] usb 1-1.3: new high-speed USB device number 4 using dwc_otg [ 3.399752] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0605, bcdDevice= 6.0b [ 3.403615] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.405677] usb 1-1.3: Product: USB2.0 Hub [ 3.408554] hub 1-1.3:1.0: USB hub found [ 3.410700] hub 1-1.3:1.0: 4 ports detected [ 3.488869] usb 1-1.4: new full-speed USB device number 5 using dwc_otg [ 3.566872] usb 1-1.4: device descriptor read/64, error -32 [ 3.748878] usb 1-1.4: device descriptor read/64, error -32 [ 3.920836] usb 1-1.3.1: new high-speed USB device number 6 using dwc_otg [ 4.000017] usb 1-1.3.1: New USB device found, idVendor=152d, idProduct=0579, bcdDevice= 5.06 [ 4.003787] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.007666] usb 1-1.3.1: Product: Portable SSD [ 4.009624] usb 1-1.3.1: Manufacturer: Intenso [ 4.011563] usb 1-1.3.1: SerialNumber: 2023061530809 [ 4.014131] usb 1-1.3.1: UAS is ignored for this device, using usb-storage instead [ 4.016913] usb-storage 1-1.3.1:1.0: USB Mass Storage device detected [ 4.018331] usb-storage 1-1.3.1:1.0: Quirks match for vid 152d pid 0579: 800000 [ 4.019474] scsi host0: usb-storage 1-1.3.1:1.0 [ 4.076855] usb 1-1.4: new full-speed USB device number 7 using dwc_otg [ 4.154846] usb 1-1.4: device descriptor read/64, error -32 [ 4.340858] usb 1-1.4: device descriptor read/64, error -32 [ 4.449024] usb 1-1-port4: attempt power cycle [ 4.514858] usb 1-1.3.4: new low-speed USB device number 8 using dwc_otg [ 5.025830] scsi 0:0:0:0: Direct-Access Intenso Portable SSD 0506 PQ: 0 ANSI: 6 [ 5.030529] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 5.034589] sd 0:0:0:0: [sda] Write Protect is off [ 5.035911] sd 0:0:0:0: [sda] Mode Sense: 47 00 00 08 [ 5.036222] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.045298] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 5.047777] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.052510] VFS: Mounted root (squashfs filesystem) readonly on device 8:3. [ 5.054768] devtmpfs: mounted [ 5.062604] Freeing unused kernel memory: 4096K [ 5.064326] Run /sbin/init as init process [ 5.065819] with arguments: [ 5.065825] /sbin/init [ 5.065831] with environment: [ 5.065836] HOME=/ [ 5.065846] TERM=linux [ 5.068844] usb 1-1.4: new full-speed USB device number 9 using dwc_otg [ 5.082261] usb 1-1.4: device descriptor read/8, error -32 [ 5.197471] usb 1-1.4: device descriptor read/8, error -32 [ 5.324120] systemd[1]: System time before build time, advancing clock. [ 5.380889] usb 1-1.4: new full-speed USB device number 10 using dwc_otg [ 5.394255] usb 1-1.4: device descriptor read/8, error -32 [ 5.399567] systemd[1]: systemd 252 running in system mode (+PAM -AUDIT -SELINUX +APPARMOR -IMA -SMACK +SECCOMP -GCRYPT -GNUTLS +OPENSSL -ACL +BLKID +CURL -ELFUTILS -FIDO2 -IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ +ZLIB -ZSTD -BPF_FRAMEWORK -XKBCOMMON -UTMP -SYSVINIT default-hierarchy=unified) [ 5.405854] systemd[1]: Detected architecture arm64. [ 5.417851] systemd[1]: Hostname set to
. [ 5.419228] systemd[1]: Installed transient /etc/machine-id file. [ 5.452402] systemd[1]: Using hardware watchdog 'Broadcom BCM2835 Watchdog timer', version 0, device /dev/watchdog0 [ 5.455253] systemd[1]: Watchdog running with a timeout of 15s. [ 5.509516] usb 1-1.4: device descriptor read/8, error -32 [ 5.616933] usb 1-1-port4: unable to enumerate USB device
The difference here is that after the "attemt to power cycle" the communication does not work, and after two additional failures it gives up at 5.616933.
Based on this my assumption is the following:
Some more test results: I decided to flash a separate SD-card with plain Raspbian OS (nothing else) to see if the same problem exists upstream. In short: Yes, Raspian show the same behaviour as HAOS when booting or if the UZB is unplugged/re-inserted. I tried three different versions:
The Legacy Raspian is running the same kernel as HAOS 11.1 and I guess also the same firmware, so I guess that is why it works. See first lines of dmesg here:
fredrik@raspberrypi:~ $ dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.1.21-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 [ 0.000000] random: crng init done [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
The "normal" Raspbian has the following first lines in dmesg: 64bit:
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.1.0-rpi7-rpi-v8 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.1.63-1+rpt1 (2023-11-24) [ 0.000000] random: crng init done [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
32bit:
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.0-rpi7-rpi-v7 (debian-kernel@lists.debian.org) (gcc-12 (Raspbian 12.2.0-14+rpi1) 12.2.0, GNU ld (GNU Binutils for Raspbian) 2.40) #1 SMP Raspbian 1:6.1.63-1+rpt1 (2023-11-24) [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
The UZB "discovery" part of the logs looks as follows: Raspbian 64bit Legacy (UZB works after the initial "hickup"):
[ 1125.402169] usb 1-1.4: USB disconnect, device number 10 [ 1134.073005] usb 1-1.4: new full-speed USB device number 12 using dwc_otg [ 1134.153006] usb 1-1.4: device descriptor read/64, error -32 [ 1134.341003] usb 1-1.4: device descriptor read/64, error -32 [ 1134.529004] usb 1-1.4: new full-speed USB device number 13 using dwc_otg [ 1134.609063] usb 1-1.4: device descriptor read/64, error -32 [ 1134.797005] usb 1-1.4: device descriptor read/64, error -32 [ 1134.905181] usb 1-1-port4: attempt power cycle [ 1135.717049] usb 1-1.4: new full-speed USB device number 14 using dwc_otg [ 1135.741234] usb 1-1.4: New USB device found, idVendor=0658, idProduct=0200, bcdDevice= 0.00 [ 1135.741275] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1135.743959] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device
Raspbian 64bit "Bookworm" (UZB does not work):
[ 261.469754] usb 1-1.4: new full-speed USB device number 12 using dwc_otg [ 261.549717] usb 1-1.4: device descriptor read/64, error -32 [ 261.737706] usb 1-1.4: device descriptor read/64, error -32 [ 261.925716] usb 1-1.4: new full-speed USB device number 13 using dwc_otg [ 262.005752] usb 1-1.4: device descriptor read/64, error -32 [ 262.193729] usb 1-1.4: device descriptor read/64, error -32 [ 262.301983] usb 1-1-port4: attempt power cycle [ 263.113723] usb 1-1.4: new full-speed USB device number 14 using dwc_otg [ 263.134652] usb 1-1.4: device descriptor read/8, error -32 [ 263.262402] usb 1-1.4: device descriptor read/8, error -32 [ 263.449734] usb 1-1.4: new full-speed USB device number 15 using dwc_otg [ 263.470533] usb 1-1.4: device descriptor read/8, error -32 [ 263.598402] usb 1-1.4: device descriptor read/8, error -32 [ 263.705865] usb 1-1-port4: unable to enumerate USB device
I also tried to attach the UZB to different USB-ports of the rpi3b and also tried via a powered USB-hub (connected to usb 1-1.3 in my logs in previous post). This made no difference. In HAOS 11.1 and Raspbian Legacy it works, in HAOS 11.1-12.0 and in "normal" Raspbian it does not.
I also specifically tried HAOS 11.3 as some users reported above that they had success with that release. However, in my case it did not make any difference.
@sairon and @agners, I guess this should be reported upstream as I guess HAOS cannot do much about it. Any suggestions?
Same situation here. It was working well on OS 11.1, upgraded to OS 12.0, same issue. This is my details:
Hardware: Raspberry Pi 3 (32-bit) Z-Wave dongle: Z-Wave.Me UZB Core: 2024.2.5 Supervisor: 2024.02.1 Operating System: 12.0 Frontend: 20240207.1
Relevant dmesg lines:
[ 3.012565] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 3.252798] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[ 3.256536] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.585719] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 3.712762] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[ 3.716357] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.832546] usb 1-1.4: new full-speed USB device number 4 using dwc_otg
[ 3.942556] usb 1-1.4: device descriptor read/64, error -32
[ 4.162528] usb 1-1.4: device descriptor read/64, error -32
[ 4.392558] usb 1-1.4: new full-speed USB device number 5 using dwc_otg
[ 4.492666] usb 1-1.4: device descriptor read/64, error -32
[ 4.712585] usb 1-1.4: device descriptor read/64, error -32
[ 4.832682] usb 1-1-port4: attempt power cycle
[ 5.492604] usb 1-1.4: new full-speed USB device number 6 using dwc_otg
[ 5.523050] usb 1-1.4: device descriptor read/8, error -32
[ 5.673199] usb 1-1.4: device descriptor read/8, error -32
[ 5.892598] usb 1-1.4: new full-speed USB device number 7 using dwc_otg
[ 5.938729] usb 1-1.4: device descriptor read/8, error -32
[ 6.083099] usb 1-1.4: device descriptor read/8, error -32
[ 6.212900] usb 1-1-port4: unable to enumerate USB device
@FredrikFornstad Thanks a lot for the investigative effort! It clearly shows it's an upstream issue, moreover like we assumed, it's a stable kernel regression, not just RPi's, because it started to appear both on x86 and RPi when we updated the kernel to some newer 6.1.xx version (will have to look up the exact patch release). By any chance, don't you have any x86 device to check if you can reproduce it there on HAOS 11.5/12.0? That way we can really make sure it's just about the UZB stick revision and Linux version.
Anyway, if there's someone who's got the stick that can be used to reproducibly trigger the issue (especially on x86), I'll be interested in getting it - that way I can try reproducing it in my environment and bisect the kernel to find the exact commit it causes i. I'll strongly prefer someone from the EU, to avoid high shipping costs and customs nuisances :innocent: Of course I'll pay for the shipping and for a new locally-sourced device.
Anyway, if there's someone who's got the stick that can be used to reproducibly trigger the issue (especially on x86), I'll be interested in getting it - that way I can try reproducing it in my environment and bisect the kernel to find the exact commit it causes i. I'll strongly prefer someone from the EU, to avoid high shipping costs and customs nuisances 😇 Of course I'll pay for the shipping and for a new locally-sourced device.
Hi, I would be willing to send you my device which has this problem on my RPI3 - I'm not sure if that guarantees the same behavior on X86. I would need to get a replacement before however and backup restore, since this is my production system and my home relies on it.
OK here goes. A lot of interesting info: I managed to find an 10+ year old HP Pavilion laptop with an Intel i7-3610QM CPU. I downloaded a Debian "LiveCD" today (debian-live-12.5.0-amd64-standard.iso) and put the image on an USB and booted the live image.
Here you see the first part of dmesg so you see OS and Computer info:
[ 0.000000] microcode: microcode updated early to revision 0x21, date = 2019-02-13 [ 0.000000] Linux version 6.1.0-18-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.76-1 (2024-02-01) [ 0.000000] Command line: BOOT_IMAGE=/live/vmlinuz-6.1.0-18-amd64 boot=live components quiet splash findiso= [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000039dbefff] usable [ 0.000000] BIOS-e820: [mem 0x0000000039dbf000-0x000000003a1befff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000003a1bf000-0x000000003aebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000003aebf000-0x000000003afbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000003afbf000-0x000000003affefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003afff000-0x000000003affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000003b000000-0x000000003f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004bf5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by INSYDE Corp. [ 0.000000] efi: ACPI=0x3affe000 ACPI 2.0=0x3affe014 SMBIOS=0x3aebdf18 MOKvar=0x3a264000 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/181B, BIOS F.22 11/02/2012 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2294.742 MHz processor
This laptop has 4 USB ports. 3 marked "SS" which I guess is USB3 and 1 port which is USB2. I had the "live CD usb" in one of the "SS" ports. I then plugged the UZB into the USB2 port and got this:
[ 545.624330] usb 1-1.2: new full-speed USB device number 5 using ehci-pci [ 545.704323] usb 1-1.2: device descriptor read/64, error -32 [ 545.892340] usb 1-1.2: device descriptor read/64, error -32 [ 546.080327] usb 1-1.2: new full-speed USB device number 6 using ehci-pci [ 546.160330] usb 1-1.2: device descriptor read/64, error -32 [ 546.348330] usb 1-1.2: device descriptor read/64, error -32 [ 546.456552] usb 1-1-port2: attempt power cycle [ 547.268330] usb 1-1.2: new full-speed USB device number 7 using ehci-pci [ 547.297571] usb 1-1.2: device descriptor read/8, error -32 [ 547.425569] usb 1-1.2: device descriptor read/8, error -32 [ 547.612330] usb 1-1.2: new full-speed USB device number 8 using ehci-pci [ 547.641567] usb 1-1.2: device descriptor read/8, error -32 [ 547.769604] usb 1-1.2: device descriptor read/8, error -32 [ 547.876542] usb 1-1-port2: unable to enumerate USB device
Exactly the same behaviour as trying the UZB in a rpi3b on HAOS 12.0 etc. BUT with one difference: Since this is another type of USB-controller it is using ehci-pci instead of dwc_otg which is used on rpi3b.
So now we know two things:
I now rebooted and made another try, and connected the UZB (to the SAME laptop, running the same liveCD...) to one of the USB-ports market "SS" (and thereby to another internal USB-controller):
[ 38.244292] usb 2-3: new full-speed USB device number 3 using xhci_hcd [ 38.372319] usb 2-3: device descriptor read/64, error -71 [ 38.608317] usb 2-3: device descriptor read/64, error -71 [ 38.844287] usb 2-3: new full-speed USB device number 4 using xhci_hcd [ 38.972317] usb 2-3: device descriptor read/64, error -71 [ 39.208325] usb 2-3: device descriptor read/64, error -71 [ 39.316405] usb usb2-port3: attempt power cycle [ 39.936295] usb 2-3: new full-speed USB device number 5 using xhci_hcd [ 39.957228] usb 2-3: New USB device found, idVendor=0658, idProduct=0200, bcdDevice= 0.00 [ 39.957241] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 39.999591] cdc_acm 2-3:1.0: ttyACM0: USB ACM device [ 39.999639] usbcore: registered new interface driver cdc_acm [ 39.999641] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
To those who wonder which USB controllers are in the laptop, here is some info:
[ 3.356305] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.356310] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.356313] usb usb1: Product: EHCI Host Controller [ 3.356315] usb usb1: Manufacturer: Linux 6.1.0-18-amd64 ehci_hcd [ 3.356317] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.356511] hub 1-0:1.0: USB hub found [ 3.356521] hub 1-0:1.0: 2 ports detected [ 3.356730] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.356739] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 3.357802] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930 [ 3.357931] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.357938] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 3.357953] ehci-pci 0000:00:1d.0: debug port 2 [ 3.357959] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.357966] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 3.357970] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 3.358013] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.358016] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.358017] usb usb2: Product: xHCI Host Controller [ 3.358019] usb usb2: Manufacturer: Linux 6.1.0-18-amd64 xhci-hcd [ 3.358020] usb usb2: SerialNumber: 0000:00:14.0 [ 3.358149] hub 2-0:1.0: USB hub found [ 3.358165] hub 2-0:1.0: 4 ports detected [ 3.358592] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 3.358596] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.358598] usb usb4: Product: xHCI Host Controller [ 3.358599] usb usb4: Manufacturer: Linux 6.1.0-18-amd64 xhci-hcd [ 3.358600] usb usb4: SerialNumber: 0000:00:14.0 [ 3.358698] hub 4-0:1.0: USB hub found [ 3.358713] hub 4-0:1.0: 4 ports detected [ 3.361860] ehci-pci 0000:00:1d.0: irq 23, io mem 0x74618000 [ 3.365636] libata version 3.00 loaded. [ 3.376225] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.376297] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.376305] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.376307] usb usb3: Product: EHCI Host Controller [ 3.376309] usb usb3: Manufacturer: Linux 6.1.0-18-amd64 ehci_hcd [ 3.376311] usb usb3: SerialNumber: 0000:00:1d.0 [ 3.376532] hub 3-0:1.0: USB hub found [ 3.376540] hub 3-0:1.0: 2 ports detected
So to my surprise it actually works (after the usual hickup in the startup, however now with another error) using the "SS" USB ports with the xhci-hcd driver. So now we know a bit more:
Forgot to say: I also booted the same laptop as in previous post with Windows 10 Home (22H2). Then the laptop could successfully access the UZB in all the USB slots without any problem and exposing it as a COM port using the build-in Microsoft "usbser" driver.
@sairon : I did some more testing with plain Debian Live CDs on my HP Pavillion Laptop (Intel i7-3610QM CPU): The USB3 port always work, and the USB2 port as follows:
Debian 12.0.0 Works (Kernel 6.1.0-9-amd64 as reported by the cmd "uname -r"), released June 10, 2023 Debian 12.1.0 Works (Kernel 6.1.0-10-amd64), released July 22, 2023 Debian 12.2.0 Does NOT work (Kernel 6.1.0-13-amd64), released Oct 7, 2023 Debian 12.4.0 Does NOT work (Kernel 6.1.0-15-amd64), released Dec 10, 2023 (Debian 12.3.0 was never released) Debian 12.5.0 Does NOT work
I have been looking at the changelog for Debian 12.2 for "suspects". Found these commits in the Linux kernel that was introduced in Debian 12.2:
My guess, but I might be wrong, is that the "Unite old scheme and new scheme descriptor reads is the cause why the UZB does no longer work. There is a fix for USB3 (SuperSpeed) that was found not to work after the schemes update.
Here you can read a bit about these patches and how they were introduced: https://lore.kernel.org/linux-usb
@FredrikFornstad Very interesting findings again, thanks! I've created a build with those four patches reverted for Raspberry Pi 3 (32-bit and 64-bit builds), could you test it? You can find the build here: https://github.com/home-assistant/operating-system/actions/runs/8141367477
Just ignore the failure, it's because the image of the target for testing wasn't built. Also note you must be logged in to download and the files are ZIP compressed when downloaded (it's a limitation of GH artifacts).
FWIW, these changes were introduced to Linux stable in 6.1.53 - which means that last version working should be HAOS 10.5 for x86 (and other non-RPi boards, with 11.0.rc1 being the breaking version, bumping 6.1.52 -> 6.1.53), and HAOS 11.1 for Raspberry Pi (breaking version 11.2.rc1, bumping 6.1.21 -> 6.1.58). This issue is a bit of a mixed bag of reports from both platforms without any further details, and while there's clear consensus about reverting to 11.1 fixing the issue, it's not clear if it's related to x86, or those all are about RPi (which should have been reported in #2977).
Tested your special bild (64bit). Result: It works with UZB on rpi3b.
Dmesg reports Linux version 6.1.73-haos-raspi with build date today afternoon.
It is exactly as in haos 11.1: 2x2 error messages, and then directly after the "attempt powercycle" it find the UZB and do the handshake and then cdc_acm assigns it to ttyACM0
I have a broken internet connection today, so I only have my mobile. So I skip the 32bit for now. But I am sure it also will work successfully.
Next step? Report to the Linux usb team?
@FredrikFornstad Perfect, I have started a discussion in the linux-usb mailing list and reported the issue to the regressions list as well. Also, putting all the pieces together, I realized the "USB 2" port on my mini PC I used for the testing before, is in fact only black, but it's a SuperSpeed port anyway :facepalm: That's why I wasn't able to reproduce it before (just like you, I got -71 errors instead and the driver recovers). And using RPi's USB 2 ports, I am reproducibly getting the USB enumeration error too :tada:
The solution to put the UZB stick in a USB3 port is not a solution for the HA Yellow. This device only has USB2 ports (in USB-A format). I just tried again the update from 11.1 to 11.5 and 12.0, but the UZB stick is not found. I switched USB port (but are both USB2) and no effect as expected. After downgrading to 11.1 the UZB is recognised again.
I hope this can be solved upstreams and if not in a special build for HA Yellow devices.
@sairon can you also add the HA Yellow label to this topic?
Describe the issue you are experiencing
After updating to 11.1, my usb dongle for Z-Wave became unresponsive and integration z-wave js ui hangs or won't start from time to time. When I turn on the monitor connected to Intel NUC, I can se that dongle generates some errors when connected to usb port.
It's saying "device descriptor read/64, error -32
It's like missing driver or something. Issue persist in 11.2 version. Right now, I had to move my z-wave network to Aeotec Z-Stick 7.![Inked2023-12-07 22 04 08](https://github.com/home-assistant/operating-system/assets/9952609/a770f050-98b6-44c1-b1fd-3763d15e498a)
What operating system image do you use?
generic-x86-64 (Generic UEFI capable x86-64 systems)
What version of Home Assistant Operating System is installed?
6.1.63-haos - Home Assistant OS 11.2
Did you upgrade the Operating System.
Yes
Steps to reproduce the issue
...
Anything in the Supervisor logs that might be useful for us?
Anything in the Host logs that might be useful for us?
System information
System Information
Home Assistant Community Store
GitHub API | ok -- | -- GitHub Content | ok GitHub Web | ok GitHub API Calls Remaining | 5000 Installed Version | 1.33.0 Stage | running Available Repositories | 1353 Downloaded Repositories | 22Home Assistant Cloud
logged_in | true -- | -- subscription_expiration | September 7, 2024 at 02:00 relayer_connected | true relayer_region | eu-central-1 remote_enabled | true remote_connected | true alexa_enabled | false google_enabled | true remote_server | eu-central-1-11.ui.nabu.casa certificate_status | ready can_reach_cert_server | ok can_reach_cloud_auth | ok can_reach_cloud | okHome Assistant Supervisor
host_os | Home Assistant OS 11.2 -- | -- update_channel | stable supervisor_version | supervisor-2023.11.6 agent_version | 1.6.0 docker_version | 24.0.7 disk_total | 916.2 GB disk_used | 64.5 GB healthy | true supported | true board | generic-x86-64 supervisor_api | ok version_api | ok installed_addons | Advanced SSH & Web Terminal (16.0.1), InfluxDB (4.8.0), Grafana (9.1.1), Node-RED (16.0.2), File editor (5.7.0), Studio Code Server (5.14.2), Mosquitto broker (6.4.0), Home Assistant Google Drive Backup (0.112.1), Network UPS Tools (0.12.2), ESPHome (2023.11.6), Samba share (12.2.0), Filebrowser (2.23.0_7), Portainer (2.19.3), Log Viewer (0.16.0), Glances (0.20.0), Frigate (Full Access) (0.12.1), Z-Wave JS UI (3.0.2), Zigbee2MQTT (1.34.0-1)Dashboards
dashboards | 7 -- | -- resources | 5 views | 41 mode | storageRecorder
oldest_recorder_run | March 17, 2023 at 20:34 -- | -- current_recorder_run | December 7, 2023 at 19:12 estimated_db_size | 17118.81 MiB database_engine | sqlite database_version | 3.41.2Additional information
No response