Odroid-N2+ doesn't boot from eMMC (11.5+, other than Kingston eMMC)

scoobydrvr commented 4 months ago

Describe the issue you are experiencing

Clean install by writing image to eMMC card. Device does not boot to HA OS with version 11.5 or 12.0. If 11.4 is flashed, device will boot and behave as expected. Updating to 11.5 causes device to fail to boot. Further information - https://github.com/home-assistant/operating-system/discussions/3226

What operating system image do you use?

odroid-n2 (Hardkernel ODROID-N2/N2+)

What version of Home Assistant Operating System is installed?

11.4

Did you upgrade the Operating System.

Yes

Steps to reproduce the issue

Flash 11.5 or 12.0 image to eMMC and attempt to boot OR
Flash 11.4 image to eMMC and allow HA OS to update to 11.5

Anything in the Supervisor logs that might be useful for us?

Unable to access after update

Anything in the Host logs that might be useful for us?

Unable to access after update

System information

No response

Additional information

Noticed that there is a kernel change between 11.4 and 11.5. Could this be the root cause?

TibsD commented 2 weeks ago

I reverted to 12.3 and booted without a problem. The problem is apparently related to the 12.4 update.

dparksfl commented 5 days ago

Just wanted to add my 2 cents...

SD card failed in my oDroid-N2+ and I replaced it with a eMMC from Amazon... https://www.amazon.com/gp/product/B0C9GRHRT1

Downloaded and flashed 12.4 with no issue. Booted, restored from backup. Everything was fine. Did some updates and rebooted. That's when I got the "Card did not respond to a voltage select! : -110" Multiple reboots and nothing.

I found the thread that suggested downgrading to 12.2. Flashed, restored, did updates (except for the 12.4 update), and rebooted. Got the same error. Unplugged it 10 minutes while I flashed a SD card - planning to abandon this eMMC. When I got back to the oDroid, powered it up for kicks and it booted fine.

I know I'm not really providing any additional info here, but thought I'd share what happened, as well as the pic of my eMMC.

-David

hannesbe commented 2 days ago

I'd like to ask everyone here to provide us with as many details about the modules used as possible (ideally with the photos of the eMMC module with the sticker removed). Eventually, if you're located in the EU, I could arrange shipping you a new eMMC module and sourcing the faulty one from you - please get in touch with me if you are willing to help with that.

Experiencing this issue with 2 newly purchased eMMCs with any version of HAOS.

original_f9cdf97c-25b6-4702-b781-62b07c0db9d2_PXL_20240713_111332830 (1) PXL_20240713_111322451

tolszak commented 18 hours ago

@sairon See below. Since the update in april I have been working completely fine. Also, if you need to chat about it more, or need more information, im piercy (Car with pixar eyes for a profile photo) on the HA discord. Feel free to DM or tag me.
Kingston
2401076-001.A006-A  (it could be 00G-A at the end, hard to tell)
2338  4014187
EMMC32G-PJ30

4014187.09
Taiwan

Hey what is the discord server addres I can find you?

home-assistant / operating-system