Open bearhntr opened 2 months ago
I pulled another DMESG after dropping the OS back to 12.1 - attached here:
dmesg | grep wl [ 0.000000] DMI: Hewlett-Packard HP t620 Quad Core TC/21B4, BIOS L40 v02.19 02/19/2019 [ 2.898961] iwlwifi 0000:01:00.0: enabling device (0100 -> 0102) [ 2.917889] iwlwifi 0000:01:00.0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000 [ 2.927619] iwlwifi 0000:01:00.0: PCI dev 2725/0024, rev=0x420, rfid=0x10d000 [ 2.955435] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-83.ucode failed with error -2 [ 2.958049] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-82.ucode failed with error -2 [ 2.960570] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-81.ucode failed with error -2 [ 2.963135] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-80.ucode failed with error -2 [ 2.965748] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-79.ucode failed with error -2 [ 2.968411] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-78.ucode failed with error -2 [ 2.971197] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-77.ucode failed with error -2 [ 2.974008] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-76.ucode failed with error -2 [ 2.976781] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-75.ucode failed with error -2 [ 2.979765] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-74.ucode failed with error -2 [ 2.982686] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-73.ucode failed with error -2 [ 3.005451] iwlwifi 0000:01:00.0: api flags index 2 larger than supported by driver [ 3.009646] iwlwifi 0000:01:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.36 [ 3.012689] iwlwifi 0000:01:00.0: loaded firmware version 72.a764baac.0 ty-a0-gf-a0-72.ucode op_mode iwlmvm [ 3.222975] iwlwifi 0000:01:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420 [ 3.455490] iwlwifi 0000:01:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f [ 3.457157] iwlwifi 0000:01:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 3.457172] iwlwifi 0000:01:00.0: WFPM_AUTH_KEY_0: 0x80 [ 3.457185] iwlwifi 0000:01:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 3.459796] iwlwifi 0000:01:00.0: loaded PNVM version e28bb9d7 [ 3.476901] iwlwifi 0000:01:00.0: Detected RF GF, rfid=0x10d000 [ 3.545477] iwlwifi 0000:01:00.0: base HW address: 60:e3:2b:fb:b1:b6 [ 3.587551] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0 [ 7.621116] iwlwifi 0000:01:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f [ 7.621157] iwlwifi 0000:01:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 7.621175] iwlwifi 0000:01:00.0: WFPM_AUTH_KEY_0: 0x80 [ 7.621194] iwlwifi 0000:01:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 7.709127] iwlwifi 0000:01:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0 [ 10.881043] wlp1s0: authenticate with 78:d2:94:36:3d:f0 [ 10.884240] wlp1s0: send auth to 78:d2:94:36:3d:f0 (try 1/3) [ 10.915902] wlp1s0: authenticated [ 10.916626] wlp1s0: associate with 78:d2:94:36:3d:f0 (try 1/3) [ 10.967679] wlp1s0: RX AssocResp from 78:d2:94:36:3d:f0 (capab=0x1511 status=0 aid=7) [ 10.970910] wlp1s0: associated [ 20.021077] wlp1s0: deauthenticating from 78:d2:94:36:3d:f0 by local choice (Reason: 3=DEAUTH_LEAVING) [ 27.055381] wlp1s0: authenticate with 78:d2:94:36:3d:f0 [ 27.060653] wlp1s0: send auth to 78:d2:94:36:3d:f0 (try 1/3) [ 27.093019] wlp1s0: authenticated [ 27.094927] wlp1s0: associate with 78:d2:94:36:3d:f0 (try 1/3) [ 27.142556] wlp1s0: RX AssocResp from 78:d2:94:36:3d:f0 (capab=0x1511 status=0 aid=7) [ 27.146232] wlp1s0: associated
This seems to be either a driver kernel regression or AX210 doesn't like the new firmware. I think I have this card somewhere, I will check if I can reproduce.
boot-broken.log boot-working.log
Having a related issue, in that bluetooth on my AX201 card also fails some of the bluetooth boot log output:
Apr 18 08:15:32 homeassistant kernel: Bluetooth: Core ver 2.22 Apr 18 08:15:32 homeassistant kernel: NET: Registered PF_BLUETOOTH protocol family Apr 18 08:15:32 homeassistant kernel: Bluetooth: HCI device and connection manager initialized Apr 18 08:15:32 homeassistant kernel: Bluetooth: HCI socket layer initialized Apr 18 08:15:32 homeassistant kernel: Bluetooth: L2CAP socket layer initialized Apr 18 08:15:32 homeassistant kernel: Bluetooth: SCO socket layer initialized Apr 18 08:15:32 homeassistant kernel: usbcore: registered new interface driver btusb Apr 18 08:15:32 homeassistant kernel: Bluetooth: hci0: Firmware timestamp 2023.42 buildtype 1 build 73111 Apr 18 08:15:32 homeassistant kernel: Bluetooth: hci0: Found device firmware: intel/ibt-0040-1050.sfi Apr 18 08:15:32 homeassistant kernel: Bluetooth: hci0: Boot Address: 0x100800 Apr 18 08:15:32 homeassistant kernel: Bluetooth: hci0: Firmware Version: 60-48.23 Apr 18 08:15:32 homeassistant kernel: usb 2-1: USB disconnect, device number 2 Apr 18 08:15:32 homeassistant kernel: Bluetooth: hci0: FW download error recovery failed (-19) Apr 18 08:15:32 homeassistant kernel: Bluetooth: hci0: sending frame failed (-19) Apr 18 08:15:32 homeassistant kernel: Bluetooth: hci0: Reading supported features failed (-19) Apr 18 08:15:32 homeassistant kernel: Bluetooth: hci0: Error reading debug features
Luckily I had old firmware backed up in /mnt/boot/firmware/intel that I've switched back to for the time being that option was discovered in a previous issue: https://github.com/home-assistant/core/issues/98523
updated to add broken/working bluetooth boot output
I hope they fix this in the 12.3 or 12.4 OS update - I hate seeing that Orange dot telling me I need to do an update.
Any updates on this? When can I upgrade the OS again? I now have multiple updates needed. I really hate running in this mode. The one circled is the one which broke WiFi and BT when I installed it.
I'm using the same card and run into the same issues.
Intel(R) Wi-Fi 6 AX210
[ 1.691899] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-83.ucode failed with error -2 [ 1.691928] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-82.ucode failed with error -2 [ 1.691956] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-81.ucode failed with error -2 [ 1.691983] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-80.ucode failed with error -2 [ 1.692006] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-79.ucode failed with error -2 [ 1.692035] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-78.ucode failed with error -2 [ 1.698141] iwlwifi 0000:02:00.0: api flags index 2 larger than supported by driver
I installed 12.3 today....my WiFi is GONE again.
@dndlion
RE-installed OS 12.1 -- and it comes back
Describe the issue you are experiencing
I was prompted there was an OS Upgrade in HA 11-APR-2024 from 12.1 to 12.2. I have had WiFi working for many months - after the upgrade I noticed that under Settings > System > Network it was no longer showing both interfaces. I rebooted the hardware and still not there.
I am running HAOS installation on an HP T620 ThinClient (as I have for nearly 2 years).
This is after the 12.2 upgrade. DMESG_Output-12APR2024.txt
What operating system image do you use?
generic-x86-64 (Generic UEFI capable x86-64 systems)
What version of Home Assistant Operating System is installed?
6.6.25-haos
Did you upgrade the Operating System.
Yes
Steps to reproduce the issue
I have just performed the
ha os update --version 12.1
and the WiFi is back.Anything in the Supervisor logs that might be useful for us?
Anything in the Host logs that might be useful for us?
System information
System Information
Home Assistant Community Store
GitHub API | ok -- | -- GitHub Content | ok GitHub Web | ok GitHub API Calls Remaining | 5000 Installed Version | 1.34.0 Stage | running Available Repositories | 1402 Downloaded Repositories | 9Home Assistant Cloud
logged_in | false -- | -- can_reach_cert_server | ok can_reach_cloud_auth | ok can_reach_cloud | okHome Assistant Supervisor
host_os | Home Assistant OS 12.2 -- | -- update_channel | stable supervisor_version | supervisor-2024.04.0 agent_version | 1.6.0 docker_version | 25.0.5 disk_total | 116.7 GB disk_used | 8.3 GB healthy | true supported | true board | generic-x86-64 supervisor_api | ok version_api | ok installed_addons | Advanced SSH & Web Terminal (17.2.0), File editor (5.8.0), Log Viewer (0.17.0), MariaDB (2.6.1), Samba share (12.3.1), Studio Code Server (5.15.0), Z-Wave JS UI (3.4.2)Dashboards
dashboards | 1 -- | -- resources | 3 views | 6 mode | storageRecorder
oldest_recorder_run | April 11, 2024 at 14:10 -- | -- current_recorder_run | April 15, 2024 at 18:47 estimated_db_size | 92.22 MiB database_engine | mysql database_version | 10.6.12Additional information
No response