search

home-assistant / operating-system

:beginner: Home Assistant Operating System
Apache License 2.0
5.07k stars 992 forks source link

Unable to boot HAOS in a Core Ultra 125H Mini PC / Beelink SEi14 #3560

Open dequinho opened 3 months ago

dequinho commented 3 months ago

Describe the issue you are experiencing

I tried to install HAOS utilizing a Live Ubuntu USB stick and the haos_generic-x86-64-13.1 image starting from scratch. I also was running HAOS in an ancient Intel NUC NUC6CAYB with a Celeron J3455 processor and a SATA SSD.

When trying to boot, it does not go further than the following error messages:

xhci_hcd 0000:00:14.0: Error while assigning device slot ID: Command Aborted
xhci_hcd 0000:00:14.0: Max number of devices this xHCI host support is 64. 
usb usb1-port4: couldn't allocate usb_device
xhci_hcd 0000:00:14.0: Error while assigning device slot ID: Command Aborted
xhci_hcd 0000:00:14.0: Max number of devices this xHCI host support is 64. 
usb usb2-port2: couldn't allocate usb_device
xhci_hcd 0000:00:14.0: Error while assigning device slot ID: Command Aborted
xhci_hcd 0000:00:14.0: Max number of devices this xHCI host support is 64. 
usb usb1-port6: couldn't allocate usb_device
xhci_hcd 0000:00:14.0: Error while assigning device slot ID: Command Aborted
xhci_hcd 0000:00:14.0: Max number of devices this xHCI host support is 64. 
usb usb1-port7: couldn't allocate usb_device
xhci_hcd 0000:00:14.0: Error while assigning device slot ID: Command Aborted
xhci_hcd 0000:00:14.0: Max number of devices this xHCI host support is 64. 
usb usb1-port10: couldn't allocate usb_device
nvme nvme0: I/O 20 QID 0 timeout, completion polled
nvme nvme0: I/O 21 QID 0 timeout, completion polled
nvme nvme0: I/O 22 QID 0 timeout, completion polled
vnvme nvme0: allocated 64 MiB host memory buffer.
nvme nvme0: I/O 23 QID 0 timeout, completion polled
nvme nvme0: I/O 20 QID 0 timeout, completion polled
nvme nvme0: I/O 21 QID 0 timeout, completion polled
nvme nvme0: I/O 22 QID 0 timeout, completion polled
nvme nvme0: I/O 20 QID 0 timeout, completion polled
name nvme0: 1/0/0 defaul/read/poll queues
nvme nvme0: I/O 21 QID 0 timeout, completion polled
nvme nvme0: I/O 21 QID 0 timeout, completion polled
....

The boot up log keep returning these same errors over and over if restarted. I tried to physically remove the SATA SSD that I had in my old NUC, inserted in a USB 3 case and tried to boot with the HAOS that is up and running already, and it also freezes at the very same point during boot sequence, throwing the same errors.

This issue seems to be tied to the Linux Kernel version that HAOS runs. Some people with similar hardware was able to boot by disabling Intel VT-d, but Beelink BIOS for this mini-pc does now allow to turn this off.

The closest issue I could find was the link below - which did not provide much info other than possible Linux kernel incompatibilities with newer hardware.

https://forum.qubes-os.org/t/installer-does-not-boot-nvme-timeout-completion-polled/13639

What operating system image do you use?

generic-x86-64 (Generic UEFI capable x86-64 systems)

What version of Home Assistant Operating System is installed?

13.1

Did the problem occur after upgrading the Operating System?

No

Hardware details

Steps to reproduce the issue

  1. Install HAOS in a Core 5 Ultra based Mini PC / Beelink SEi14
  2. Try to boot from NVME SSD or with a NVME SSD present

  3. ...

Anything in the Supervisor logs that might be useful for us?

During boot up sequence, following errors appears: 

xhci_hcd 0000:00:14.0: Error while assigning device slot ID: Command Aborted
xhci_hcd 0000:00:14.0: Max number of devices this xHCI host support is 64. 
usb usb1-port4: couldn't allocate usb_device
xhci_hcd 0000:00:14.0: Error while assigning device slot ID: Command Aborted
xhci_hcd 0000:00:14.0: Max number of devices this xHCI host support is 64. 
usb usb2-port2: couldn't allocate usb_device
xhci_hcd 0000:00:14.0: Error while assigning device slot ID: Command Aborted
xhci_hcd 0000:00:14.0: Max number of devices this xHCI host support is 64. 
usb usb1-port6: couldn't allocate usb_device
xhci_hcd 0000:00:14.0: Error while assigning device slot ID: Command Aborted
xhci_hcd 0000:00:14.0: Max number of devices this xHCI host support is 64. 
usb usb1-port7: couldn't allocate usb_device
xhci_hcd 0000:00:14.0: Error while assigning device slot ID: Command Aborted
xhci_hcd 0000:00:14.0: Max number of devices this xHCI host support is 64. 
usb usb1-port10: couldn't allocate usb_device
nvme nvme0: I/O 20 QID 0 timeout, completion polled
nvme nvme0: I/O 21 QID 0 timeout, completion polled
nvme nvme0: I/O 22 QID 0 timeout, completion polled
vnvme nvme0: allocated 64 MiB host memory buffer.
nvme nvme0: I/O 23 QID 0 timeout, completion polled
nvme nvme0: I/O 20 QID 0 timeout, completion polled
nvme nvme0: I/O 21 QID 0 timeout, completion polled
nvme nvme0: I/O 22 QID 0 timeout, completion polled
nvme nvme0: I/O 20 QID 0 timeout, completion polled
name nvme0: 1/0/0 defaul/read/poll queues
nvme nvme0: I/O 21 QID 0 timeout, completion polled
nvme nvme0: I/O 21 QID 0 timeout, completion polled
....

Anything in the Host logs that might be useful for us?

Unable to access Host logs

System information

No response

Additional information

No response

github-actions[bot] commented 4 days ago

There hasn't been any activity on this issue recently. To keep our backlog manageable we have to clean old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant OS version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.