search

hoobs-org / gui

Interface component for the certified HOOBS stack.
GNU General Public License v3.0
2 stars 1 forks source link

No Position control with Shutter accessory #124

Open apartmedia opened 3 years ago

apartmedia commented 3 years ago

Not sure if this is gui or server related. After updating to 4.0.87 the shutter accessory control starts acting weird and does not work properly. I‘m using it with Shelly plugin driving a Shelly 2.5 which controls a motor screen. There is no problem using the shutter inside the Home App or via Siri/Alexa. The problem occurs when using the accessory page in hoobs UI. After browsing to the room with the shutter it starts moving to the open position without any user action. When I try to control the screen, the position slider starts flipping back to open and retriggers the screen in the opposite direction. When controlling the screen via Home App the accessory in the UI gets not updated. Is there any change that could cause this? It worked for me on the previous installed version 4.0.83.

The log shows some error regarding roller position: „Failed to set rollerPosition“ See attached video which shows the flipping of the accessory slider. B7EE0612-D340-4FAA-82D7-B9237B40148C

https://user-images.githubusercontent.com/17024592/125972555-6a3a22bb-7cb5-4472-befb-65cb3d877e1e.mov

All tested on iPad OS 14.6 with Mobile Safari.

mkellsy commented 3 years ago

OK there's a problem here. Shelly is 100% closed, and Somfy is 100% open. I have to think of a solution for this.

apartmedia commented 3 years ago

OK there's a problem here. Shelly is 100% closed, and Somfy is 100% open. I have to think of a solution for this.

Ok, understand, thanx for the Feedback and looking into it

Biggsylad commented 3 years ago

I assume this incorporates the issue I reported with Coonexoon and Somfy? apologies logged it into the System bugs.... I have done a little more digging, this only happens when you show the accessories page otherwise it's fine, as already mentioned it defaults to 100% open, from the phone or Ipad it reports closed and will control the door, but the RTS is not two way so I am not surprised I cant get the current status