Open GoogleCodeExporter opened 9 years ago
I have found that the following combo fixes the pauses for me.
ReplicatorG 009
Skeinforge 005
Motherboard Firmware 1.4
Extruder Firmware 1.6
Motherboard Firmware 1.4 was the main change that brought on the fix. I am
currently at about 36 minutes into a print. Before at MB firmware 1.6 i was
getting
a consistent pause every 4-6 minutes. Usually where the print is making
circles.
Hope this helps
Original comment by CidVi...@gmail.com
on 4 Oct 2009 at 7:41
I have now printed 5 hours worth and had no pauses in build. The combo i
mentioned
before has worked flawlessly for me.
Original comment by CidVi...@gmail.com
on 5 Oct 2009 at 12:48
[deleted comment]
I also have this problem, however changing program versions and also firmware
versions has not fixed the problem...
I am using a Makerbot, No. 312 (batch 8)
Running Ubuntu 9.10
ReplicatorG 0010
Motherboard Firmware 1.6
Extruder Firmware 1.6
Original comment by smky...@gmail.com
on 11 Nov 2009 at 7:10
same here
Original comment by terence....@gmail.com
on 28 Jun 2012 at 12:29
Original issue reported on code.google.com by
CidVi...@gmail.com
on 26 Sep 2009 at 6:28Attachments: