search

hristo-atanasov / Tasmota-IRHVAC

Home Assistant platform for controlling IR Air Conditioners via Tasmota IRHVAC command and compatible hardware
200 stars 67 forks source link

Cant control a COOLIX AC #136

Open delaineS opened 5 months ago

delaineS commented 5 months ago

I followed your scheme, pressed ON on the remote control of my air conditioner, command read correctly by the Tasmota.

19:49:31.514 MQT: tele/Tasmota/RESULT = {"IrReceived":{"Protocol":"COOLIX","Bits":24,"Data":"0xB27BE0","DataLSB":"0x4DDE07","Repeat":0,"IRHVAC":{"Vendor":"COOLIX","Model":-1,"Command":"Control","Mode":"Off","Power":"Off","Celsius":"On","Temp":25,"FanSpeed":"Auto","SwingV":"Off","SwingH":"Off","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"Off","Filter":"Off","Clean":"Off","Beep":"Off","Sleep":-1,"iFeel":"Off","SensorTemp":null}}}

I resend the command and nothing Works

IRHVAC {"Vendor":"COOLIX","Model":-1,"Command":"Control","Mode":"Auto","Power":"On","Celsius":"On","Temp":28,"FanSpeed":"Auto","SwingV":"Off","SwingH":"Off","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"Off","Filter":"Off","Clean":"Off","Beep":"Off","Sleep":-1,"iFeel":"Off","SensorTemp":null}

nao-pon commented 4 months ago

@delaineS A fix has been made to the upstream library IRremoteESP8266 v2.8.6 for COOLIX AC. This is reflected in Tasmota v13.1.0 and above. I'm not sure if it's related to this issue, but please try Tasmota v13.1.0 or above.

fotis3d commented 4 months ago

@nao-pon I didn't want to open a new topic cause my question is about a Toyotomi I have but registers as Coolpix in the mqtt.

I can control heat, cool, temperatures, swing vertical but I cannot set modes: auto, dry, fan. As far as I see everything is correct. Could it be the AC's fault ?

fotishellas commented 3 months ago

It just will not turn on if I initially choose auto, dry or fan. Not a big deal. ;)

@delaineS maybe you should check this also. My AC will turn on if I choose cool or heat and then auto, dry and fan work.