Closed NdK73 closed 2 years ago
Can you provide some more information about the issue you have. "But lately it stopped working" isn't helpful enough. Give us details of versions and errors ect.. :)
I haven't kept track of HA versions. I last used the component in Sept/Oct and it worked. A couple of weeks ago I noticed it was unavailable, then I tried upgrading it from git but it never came back. Can't find any errors in the logs (from the GUI) , just the warning about it being untested.
Il gio 17 mar 2022, 01:23 Hristo Atanasov @.***> ha scritto:
Can you provide some more information about the issue you have. "But lately it stopped working" isn't helpful enough. Give us details of versions and errors ect.. :)
— Reply to this email directly, view it on GitHub https://github.com/hristo-atanasov/Tasmota-IRHVAC/issues/68#issuecomment-1069771452, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAODXYI5NYXRPUMQYDWFTGTVAJ3RTANCNFSM5Q4UP3OQ . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.
You are receiving this because you authored the thread.Message ID: @.***>
I haven't kept track of HA versions. I last used the component in Sept/Oct and it worked. A couple of weeks ago I noticed it was unavailable, then I tried upgrading it from git but it never came back. Can't find any errors in the logs (from the GUI) , just the warning about it being untested. Il gio 17 mar 2022, 01:23 Hristo Atanasov @.> ha scritto: … Can you provide some more information about the issue you have. "But lately it stopped working" isn't helpful enough. Give us details of versions and errors ect.. :) — Reply to this email directly, view it on GitHub <#68 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAODXYI5NYXRPUMQYDWFTGTVAJ3RTANCNFSM5Q4UP3OQ . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub. You are receiving this because you authored the thread.Message ID: @.>
Same problem with all my Tasmota IR, it was working from months, this Freen, and anotther MITSUBISHI_HEAVY_88 Now both are unavailable HA: 2022.3.5 Tasmota 10, upgraded to 11 no changes Wemos D1 Mini
-This in my conf from the begining for Gree
Help us ¡¡
I woud suggest trying with older or different Tasmota build in order to see if the problem is from Home Assistant or from Tasmota. I'm actually running everything without any problems with the latest HA and Tasmota 8.1.0 ircustom https://github.com/arendst/Tasmota/releases/download/v8.1.0/tasmota-ircustom.bin
I woud suggest trying with older or different Tasmota build in order to see if the problem is from Home Assistant or from Tasmota. I'm actually running everything without any problems with the latest HA and Tasmota 8.1.0 ircustom https://github.com/arendst/Tasmota/releases/download/v8.1.0/tasmota-ircustom.bin
Hello I downgraded to tasmota 8.1 and still not working
Sensor works sending by nodered topic by mqtt, ({"Vendor":"GREE","Model":1,"Mode":"Heat","Power":"On","Celsius":"On","Temp":26, "FanSpeed":"Auto","SwingV":"Auto","SwingH":"Off","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"On","Filter":"Off","Clean":"Off","Beep":"Off","Sleep":-1}}}"
And heater works
I'm not sure what is the problem in your case. It might be MQTT issue between your HA and your Tasmota device .. I did even clean install of HA and added everything from scratch and it works. Can you try to shrink the topic? I'm not sure if this might be some kind of issue. Also you can try with state_topic
set to stat/tasmota/..
instead of tele/tasmota/..
in case for some reason your Tasmota device does not send tele
messages.
Lovelace:
Supervisor:
Tasmota:
If you are receiving {"Command": "Unknown"}
this is indication, that you are not using Tasmota build, that have been built for IR devices. Like: "tasmota-ircustom.bin" (8.1.0 for ESP8266), "tasmota32-ir.bin" (for ESP32) or "tasmota-ir.bin" (for ESP8266).
If you are receiving
{"Command": "Unknown"}
this is indication, that you are not using Tasmota build, that have been built for IR devices. Like: "tasmota-ircustom.bin" (8.1.0 for ESP8266), "tasmota32-ir.bin" (for ESP32) or "tasmota-ir.bin" (for ESP8266).
Hello. Is true, in the process of upgrading / downgrade from/to 11/8.1 I confused the image. ( I deleted the post after descover it) I solved the problem with your help. It is about the complexity of the topic. The moment I remove the bar in the topic, the weather is online. I applied to the other climas Tasmota, and again my 3 climas appears availible. (I have two HA, one local and second in cloud, both had the same problem, in same version, and both restart to work) Tested in Tasmota 8.1 and after that in V11 I don't know if you can force this to verify it, I leave it like that for now. The 3 climas still now in v11 Tasmota.
Thanks again
@kaciker I'm glad to hear these good news from you! :)
@kaciker I'm glad to hear these good news from you! :)
@NdK73 How about you? Did you manage to solve your issue? :)
Still trying suggestions but still not working. I am (quite) sure I'm using the correct image: http://ota.tasmota.com/tasmota/release/tasmota-ir.bin.gz -- just tried upgrading again (even if it already was at 11.0.0).
I now forced "setoption19 0" and the IR bridge (BW-RC1) gets listed in the 'Tasmota' integration (instead of only being configurable in MQTT).
I can succesfully send IR codes to a lamp by:
switch:
- platform: mqtt
name: "Lampada soppalco"
unique_id: ir1_cmd_light_onoff
#state_topic: "" # Topic to read the current state
command_topic: "ir-1/cmnd/IRsend"
qos: 2
payload_on: "{\"Protocol\":\"NEC\",\"Bits\":32,\"Data\":\"0x80BF3BC4\",\"DataLSB\":\"0x1FDDC23\",\"Repeat\":0}"
payload_off: "{\"Protocol\":\"NEC\",\"Bits\":32,\"Data\":\"0x80BF3BC4\",\"DataLSB\":\"0x1FDDC23\",\"Repeat\":0}" # toggle :(
retain: false
(this has always worked)
But the thermostat is still "unavailable".
Still trying suggestions but still not working. I am (quite) sure I'm using the correct image: http://ota.tasmota.com/tasmota/release/tasmota-ir.bin.gz -- just tried upgrading again (even if it already was at 11.0.0).
I now forced "setoption19 0" and the IR bridge (BW-RC1) gets listed in the 'Tasmota' integration (instead of only being configurable in MQTT).
I can succesfully send IR codes to a lamp by:
switch: - platform: mqtt name: "Lampada soppalco" unique_id: ir1_cmd_light_onoff #state_topic: "" # Topic to read the current state command_topic: "ir-1/cmnd/IRsend" qos: 2 payload_on: "{\"Protocol\":\"NEC\",\"Bits\":32,\"Data\":\"0x80BF3BC4\",\"DataLSB\":\"0x1FDDC23\",\"Repeat\":0}" payload_off: "{\"Protocol\":\"NEC\",\"Bits\":32,\"Data\":\"0x80BF3BC4\",\"DataLSB\":\"0x1FDDC23\",\"Repeat\":0}" # toggle :( retain: false
(this has always worked)
But the thermostat is still "unavailable".
I have 2 suggestions for you. The first is to try with state_topic: "ir-1/stat/RESULT"
. If this doesn't work, why don't you try to change the Tasmota topic in Configuration -> Configure MQTT -> Full Topic
to %prefix%/%topic%/
(this is the default) and try to use state_topic: "tele/ir-1/RESULT"
or state_topic: "stat/ir-1/RESULT"
and command_topic: "cmnd/ir-1/IRhvac"
..
Also if nothing of these suggestions work .. What do you see in the console of Tasmota, when you try to command the AC trough HA? Any errors?
Tks, it seems it's working again!
change the Tasmota topic in Configuration -> Configure MQTT -> Full Topic to %prefix%/%topic%/ (this is the default)
Deleted the previous setting of %topic%/%prefix%/ : the light control stopped working but that was expected and easy to fix.
try to use state_topic: "tele/ir-1/RESULT" or state_topic: "stat/ir-1/RESULT" and command_topic: "cmnd/ir-1/IRhvac"
This fixed it! I now have
command_topic: "cmnd/ir-1/IRhvac"
state_topic: "tele/ir-1/RESULT"
Why it did stop working still eludes me, but... FINALLY IT WORKS AGAIN! :)
@NdK73 I'm glad you have it working again. :)
I woud suggest trying with older or different Tasmota build in order to see if the problem is from Home Assistant or from Tasmota. I'm actually running everything without any problems with the latest HA and Tasmota 8.1.0 ircustom https://github.com/arendst/Tasmota/releases/download/v8.1.0/tasmota-ircustom.bin
Hi @hristo-atanasov is it possible for you to share a copy of this .bin? I have seen you reference this tasmota-ircustom.bin in a number of posts, but every time I follow that link the folder is no longer there.
I've been forced to compile my own custom firmware with tasmocompiler, but still getting regular "Guru meditation - Panic'd" errors and I am not sure I've done the compiling correctly.
I am running on ESP32-WROOM-32
@ricardoletosa Sorry I've messed up the link .. This is a working link: https://github.com/arendst/Tasmota/releases/download/v8.1.0/tasmota-ircustom.bin I'm not sure if and how it will work on ESP32 .. If you have some problems try with ESP8266 board .. Also, newer versions of Tasmota have support for more ACs, but they don't have precompiled version that support irremote and I2C at the same time, which is important for me, as my temp/humidity/pressure sensors are I2C based.
Many thanks. I hope it does work on ESP32. My plan is to follow your design (many thanks for that) for a PANASONIC_AC which should be there from early versions, but also needing the I2C support (which is why I can't use the tasmota-ir.bin from the latest version).
Just for info... unfortunately https://github.com/arendst/Tasmota/releases/download/v8.1.0/tasmota-ircustom.bin bricks the ESP32-DevKit-v1
@ricardoletosa try with this zipped bin. Yesterday I compiled Tasmota for ESP8266 with IR and I2C Temp sensors and it works. Now I compiled it for ESP32 with Tasmota 11.1 tasmota-esp32-ir-I2C-sensors.zip
Hello.
I used succesfully this integration in the past (last summer), but lately it stopped working. I'm currently using Home Assistant 2022.3.5 and latest git version of tasmota_irhvac.
My config file contains:
I restarted HA multiple times, but the card, defined as:
still reports "unavailable".
Did tasmota_irhvac become incompatible with latest HA releases? It seems used, so probably I'm missing something... I can't see anything useful in the log from config -> settings -> logs (tasmota_irhvac gets mentioned exactly once, warning that it's not tested, just like other integrations I'm using).
Any idea?
Tks.