it-delta
commented
3 years ago Hi! I have the same error, Ubuntu 20.04...
Open SaElmas opened 3 years ago
it-delta
commented
3 years ago Hi! I have the same error, Ubuntu 20.04...
com2
commented
3 years ago Confirmed for Ubuntu 20.04
giopaglia
commented
3 years ago Hi, same here for Ubuntu 20.04.
mnadhro
commented
2 years ago The same error for Ubuntu 20.04.2 LTS x86_64
klimashevich
commented
2 years ago +1 Ubuntu 20.04.
jonathonrambo
commented
2 years ago Ubuntu 20.04.2 LTS
Ditto. Tried the whl as well and got this:
ERROR: wxPython-4.1.1-cp38-cp38-linux_x86_64.whl is not a supported wheel on this platform.
Pommes16
commented
1 year ago Hey guys, i got the same problem here. It seems like missing the "GTK-3.0" dependency, after installing it by running
sudo apt-get install libgtk-3-devthe building wheel starts to work.... but it takes very very long to finish, like more than 5 min. After its done the installation is also successfully completed. reference: https://askubuntu.com/questions/101306/how-do-i-install-gtk-3-0
I have the following error. Could you please help me about this issue?
Building wheel for GoSync (setup.py) ... done Created wheel for GoSync: filename=GoSync-0.52-py2.py3-none-any.whl size=170713 sha256=8376a217ac6558d2a7d759f381e1060a6bda3aa11f02424d9de891821a52f7d9 Stored in directory: /tmp/pip-ephem-wheel-cache-l7d50z9v/wheels/66/0d/79/20fdb5f8f64d6e314f5bb5984910dc7ac8a133a38a04cbbd85 **Building wheel for wxpython (setup.py) ... error ERROR: Command errored out with exit status 1: command: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-jigdgj8f/wxpython/setup.py'"'"'; file='"'"'/tmp/pip-install-jigdgj8f/wxpython/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-wh_6vzkc cwd: /tmp/pip-install-jigdgj8f/wxpython/ Complete output (143 lines): running bdistwheel running build WARNING: Building this way assumes that all generated files have been generated already. If that is not the case then use build.py directly to generate the source and perform the build stage. You can use --skip-build with the bdist* or install commands to avoid this message and the wxWidgets and Phoenix build steps in the future.
"/usr/bin/python3" -u build.py build Will build using: "/usr/bin/python3" 3.8.5 (default, Jul 28 2020, 12:59:40) [GCC 9.3.0] Python's architecture is 64bit cfg.VERSION: 4.1.1
Running command: build Running command: build_wx wxWidgets build options: ['--wxpython', '--unicode', '--gtk3'] Configure options: ['--enable-unicode', '--with-gtk=3', '--enable-sound', '--enable-graphics_ctx', '--enable-display', '--enable-geometry', '--enable-debug_flag', '--enable-optimise', '--disable-debugreport', '--enable-uiactionsim', '--enable-autoidman', '--with-sdl'] /tmp/pip-install-jigdgj8f/wxpython/ext/wxWidgets/configure --enable-unicode --with-gtk=3 --enable-sound --enable-graphics_ctx --enable-display --enable-geometry --enable-debug_flag --enable-optimise --disable-debugreport --enable-uiactionsim --enable-autoidman --with-sdl checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for toolkit... gtk checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether we are using the Intel C compiler... no checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking whether gcc needs -traditional... no checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking whether we are using the Intel C++ compiler... no checking whether we are using the Sun C++ compiler... no checking for ar... ar checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for langinfo.h... yes checking for wchar.h... yes checking for sys/select.h... yes checking for cxxabi.h... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking size of short... 2 checking size of void ... 8 checking size of int... 4 checking size of long... 8 checking size of size_t... 8 checking size of long long... 8 checking size of wchar_t... 4 checking for va_copy... yes checking for _FILE_OFFSET_BITS value needed for large files... 64 checking if large file support is available... yes checking for _LARGEFILE_SOURCE value needed for large files... no checking whether byte ordering is bigendian... no checking for std::wstring in... yes
checking for std::istream... yes
checking for std::ostream... yes
checking for type_traits... yes
checking for __sync_fetch_and_add and __sync_sub_and_fetch builtins... yes
checking for libraries directories... /usr/lib/x86_64-linux-gnu /usr/lib
checking for cos... no
checking for floor... no
checking if floating point functions link without -lm... no
checking for sin... yes
checking for ceil... yes
checking if floating point functions link with -lm... yes
checking for strtoull... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
configure: WARNING: Defaulting to the builtin regex library for Unicode build.
checking for zlib.h >= 1.1.4... yes
checking for zlib.h... (cached) yes
checking for deflate in -lz... yes
checking for png.h > 0.90... yes
checking for png.h... (cached) yes
checking for png_sig_cmp in -lpng... yes
checking for jpeglib.h... yes
checking for jpeg_read_header in -ljpeg... yes
checking lzma.h usability... yes
checking lzma.h presence... yes
checking for lzma.h... yes
checking for lzma_code in -llzma... yes
checking for jbg_dec_init in -ljbig... no
checking for LIBTIFF... not found via pkg-config
checking for tiffio.h... no
configure: WARNING: system tiff library not found, will use built-in instead
checking whether tiff.h file exists... yes
checking for expat.h... yes
checking if expat.h is valid C++ header... yes
checking for XML_ParserCreate in -lexpat... yes
checking for GTK+ version...
checking for pkg-config... (cached) /usr/bin/pkg-config
checking pkg-config is at least version 0.16... yes
checking for GTK+ - version >= 3.0.0... Package gtk+-3.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing Could not run GTK+ test program, checking why...
The test program failed to compile or link. See the file config.log for the
exact error that occurred. This usually means GTK+ is incorrectly installed.
configure: error:
The development files for GTK+ were not found. For GTK+ 2, please
ensure that pkg-config is in the path and that gtk+-2.0.pc is
installed. For GTK+ 1.2 please check that gtk-config is in the path,
and that the version is 1.2.3 or above. Also check that the
libraries returned by 'pkg-config gtk+-2.0 --libs' or 'gtk-config
--libs' are in the LD_LIBRARY_PATH or equivalent.
gtk+-3.0.pc' to the PKG_CONFIG_PATH environment variable No package 'gtk+-3.0' found Package gthread-2.0 was not found in the pkg-config search path. Perhaps you should add the directory containinggthread-2.0.pc' to the PKG_CONFIG_PATH environment variable No package 'gthread-2.0' found noError running configure ERROR: failed building wxWidgets Traceback (most recent call last): File "build.py", line 1510, in cmd_build_wx wxbuild.main(wxDir(), build_options) File "/tmp/pip-install-jigdgj8f/wxpython/buildtools/build_wxwidgets.py", line 372, in main exitIfError(wxBuilder.configure(dir=wxRootDir, options=configure_opts), File "/tmp/pip-install-jigdgj8f/wxpython/buildtools/build_wxwidgets.py", line 85, in exitIfError raise builder.BuildError(msg) buildtools.builder.BuildError: Error running configure Finished command: build_wx (0m6.7s) Finished command: build (0m6.7s) Command '"/usr/bin/python3" -u build.py build' failed with exit code 1.
ERROR: Failed building wheel for wxpython Running setup.py clean for wxpython Successfully built GoSync Failed to build wxpython Installing collected packages: wxpython, GoSync Attempting uninstall: wxpython Found existing installation: wxPython 4.0.7 Not uninstalling wxpython at /usr/lib/python3/dist-packages, outside environment /usr Can't uninstall 'wxPython'. No files were found to uninstall. Running setup.py install for wxpython ... error ERROR: Command errored out with exit status 1: command: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-jigdgj8f/wxpython/setup.py'"'"'; file='"'"'/tmp/pip-install-jigdgj8f/wxpython/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /tmp/pip-record-lbmg36xk/install-record.txt --single-version-externally-managed --compile --install-headers /usr/local/include/python3.8/wxpython cwd: /tmp/pip-install-jigdgj8f/wxpython/ Complete output (143 lines): running install running build WARNING: Building this way assumes that all generated files have been generated already. If that is not the case then use build.py directly to generate the source and perform the build stage. You can use --skip-build with the bdist_* or install commands to avoid this message and the wxWidgets and Phoenix build steps in the future.
ERROR: Can't roll back wxPython; was not uninstalled ERROR: Command errored out with exit status 1: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-jigdgj8f/wxpython/setup.py'"'"'; file='"'"'/tmp/pip-install-jigdgj8f/wxpython/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /tmp/pip-record-lbmg36xk/install-record.txt --single-version-externally-managed --compile --install-headers /usr/local/include/python3.8/wxpython Check the logs for full command output.