Add BOM. doesn't include switches.

hsgw / plaid

12x4 ortholinear usb keyboard made by Through Hole components ONLY.

MIT License

735 stars 91 forks source link

Add BOM. doesn't include switches. #3

Closed themoonisacheese closed 5 years ago

themoonisacheese commented 5 years ago

BOM has been generated through digi-key. rubber pads are a bit big.

hsgw commented 5 years ago

Thanks!

hsgw commented 5 years ago

Sorry.
I was overlooking resistor issues.
And I checked simply, the USB connector is not correct.
So this commit is reverted.

hsgw commented 5 years ago

USB connector is XM7D-0512 or equivalent.
I will add this to build guide.

themoonisacheese commented 5 years ago

I mounted it without problems. Although it doesn't have the "right" mounting hardware, it fits. A more serious problem is that the resistors I chose are too big. I will also modify the quantities so that they're appropriate. For example, buying 100 diodes was 3 cents cheaper for me than buying 48 of them, but that may not be the case for everyone.

hsgw commented 5 years ago

I mounted it without problems.

Sounds good 💯
In Japanese store, this 4 legs type USB miniB connector is cheap. But mouser or digikey is not. Thank you for the information.

buying 100 diodes

Typical story :)
But "official" BOM contains only required quantity, I think.

Anyway, I am meaning to publish BOM after I publish Rev.1 pcb.

themoonisacheese commented 5 years ago

Sounds good