Closed GoogleCodeExporter closed 9 years ago
Seems like codecs of CME don't intersect with sipdroids. Can u set codece to
"alaw"
in CME ? Can you send full traffic dump?
btw I have never used CME.
Original comment by buzm...@gmail.com
on 14 Jul 2009 at 3:21
Hello,
Reading the CME documentation, it seems that CME is using g711ulaw
and not g711Alaw as specified in the FAQ section of sipdroid
Kind Regards
Original comment by c.scherm...@gmail.com
on 14 Jul 2009 at 3:41
Tomorrow i will be at office, i can force alaw codec.
Anaway the bigger problem it the registation, unauthorized.
If you compare sipdroid and Xlite dump you can see the xlite recive 401 error
like
sipdroid at first attempt, but at the second one (adding digest) it successfuly
register.
Anyway, do you want sip headers only or also voice dump ?
Original comment by cesare.m...@gmail.com
on 14 Jul 2009 at 5:41
Downloaded 1.0.1 full.
Now i'm able to register, and using alaw i can also place a call.
There are 3 issue left:
1- My G1 can listen but don't speak (i don't recive voice)
2- The voice originated from mobile is metallic, and after fre seconds (about
20-30)
the call hangup
3- I can place calls but i can't recive
In the dump there is registration and one call.
Original comment by cesare.m...@gmail.com
on 15 Jul 2009 at 9:12
Attachments:
Cesare, I think issues 1 and 3 are due to this.
http://code.google.com/p/sipdroid/issues/detail?id=9
I've got my G1 registering to Callmanager 6. THe IP address shows up as
127.0.0.1.
I can make calls, but cannot receive (callmanager can't send calls to my phone
via
127.0.0.1), and I also get one way audio (again, can't start the second rtp
stream to
the phone via 127.0.0.1)
My audio sounds ok as far as I can tell when it works.
Original comment by stevemas...@gmail.com
on 11 Nov 2009 at 9:45
Hey guys, how did you get SIPDroid to register with CUCM 6 ? i have CUCM 6 and
Xlite
works just fine,but the same settings on the Sipdroid does not work. I get a
registration failed (timeout) error on SIPDroid...the username settings used in
SIPDroid are same as that on Xlite.
Original comment by snair.sn...@gmail.com
on 17 Nov 2009 at 10:27
Attachments:
i am using version 1.1.8 (note to add on to above)
Original comment by snair.sn...@gmail.com
on 17 Nov 2009 at 10:31
Anybody make any progress on this? I'm trying to set up SIPDROID to work with
Cisco
CM 6.1.3. I have the same issues described in Comment 5 above.
Original comment by annettep...@gmail.com
on 1 Dec 2009 at 10:38
The new beta versions 1.3.12 beta seems to have fixed all the problems. I am
able to
register, send receive calls with Callmanager..:) Sipdroid rocks
Original comment by snair.sn...@gmail.com
on 13 Feb 2010 at 8:30
Original comment by pmerl...@googlemail.com
on 14 Feb 2010 at 9:35
Original issue reported on code.google.com by
cesare.m...@gmail.com
on 6 Jul 2009 at 10:43Attachments: