hunkreborn
commented
4 years ago Hi Andy! I dont have the NX1000, but in dpreview forum there are threads about this question, there is a reply from StenM in Jul 30, 2016 saying this:
- https://www.youtube.com/watch?v=gF4omWstv0c
-
- install nx_dev.adj file from here - https://drive.google.com/file/d/0B67DhJWuBYVAU3Znc0J6NVE2eW8/view?usp=sharing
-
- Turn on the camera and select the “SMART AUTO” mode
- - TEST MODE : SMART MODE → DOWN → OK → UP → OK → RIGHT → del+OK button at the same time.The video is just to show it working in a NX1, but I think it will be the same menu for NX1000, and the link for the file at google drive is dead, it goes like this:
create a text file in SD card root, name it nx_dev.adj (change the file extension from .txt to .adj) and write inside of the file smart_camera and save it. It should be 12 bytes exactly
Give it a try.
And about the autoexec.sh method for NX2000, you need to place the file in the SD card, then connect to the email option in wifi menu, and in the computer use the telnet command to change things. Nothing will happen in the camera itself, but when you remove the video rec. limit then start to record a video, it'll not show the 00:00/29:59 anymore, it'll be something like 00:00/152:59, as for 152 minutes and 59 seconds of recording.
Remember to format your SD as EXFAT, since FAT32 will limit the file to 4GB.
Another thing, every entrance for preman commands is different for every camera model. In nx2000 the memory address for "APPPREF_B_ENABLE_NO_LENS_RELEASE" is 0x0000030c, in nx300 its something else entirely, and in nx1000 will be different too, so you need to run a prefman info command, to check every single memory address for each function, then you set it as 1 to enable no lens release.
You may follow the wiki in this git to check how to connect and use telnet, collect memory information with prefman and change it.
Feel free to update us with your progress
ajavamind
julijane
cbrafilms
JankHua
I tried placing the autoexec.sh file in root directory of SD card in a NX1000 and powered up. Nothing happened. Could this work for NX1000 with modifications? Are there any other files needed? Is there any way to enter developer mode in the NX1000? thanks,