I have 2 ISP's and tried both with the same G-010S-A and same other hardware. With the modems provided by the ISP I get a speed of 500MB/s with both. With 1 ISP (Telmex Mexico) in combination with the G-010S-A I get the same or a slightly higher speed, but with the other (TotalPlay Mexico) my speed is consitently only 20MB/s. So I can rule out hardware-issues unrelated to the specific hardware/ISP combination.
ISP provided modem: FiberHome HG6145F
Verification method used by ISP: LOID, LOIDPW, PLOAM, SerialNumber (and possibly MAC-Address), not PPPoE credentials.
Connection is stable (but slow).
Further investigating I learned that this is likely caused by a wrong OMCI_OLT_MODE or OMCI_TM_OPT. I didn't find any instructions on how to change these on the G-010S-A. Does anyone know?
I have 2 ISP's and tried both with the same G-010S-A and same other hardware. With the modems provided by the ISP I get a speed of 500MB/s with both. With 1 ISP (Telmex Mexico) in combination with the G-010S-A I get the same or a slightly higher speed, but with the other (TotalPlay Mexico) my speed is consitently only 20MB/s. So I can rule out hardware-issues unrelated to the specific hardware/ISP combination.
ISP provided modem: FiberHome HG6145F Verification method used by ISP: LOID, LOIDPW, PLOAM, SerialNumber (and possibly MAC-Address), not PPPoE credentials. Connection is stable (but slow).
I used the custom firware uploaded here to be able to set LOID and LOIDPW: https://github.com/hwti/G-010S-A/issues/17#issuecomment-1073027251
No variables were changed other then the ones needed for succesfull verification.
Are there any variables I didnt set that wouldn't effect succesfull authentication but would have such a drastic impact on speed?