What steps will reproduce the problem?
1.install WL500gpv2-1.9.2.7-rtn-r5450.trx
2.config APN and other
3.Plug Huawei E3131s-2
4.Connect
5.Check PPP Log >> Dial number, apn etc.. OK then you get NOCARRIER error
What is the expected output? What do you see instead?
Internet connection
What version of the product are you using?
WL500G Premium V2 @ WL500gpv2-1.9.2.7-rtn-r5450.trx
Please describe the problem as detailed as it's possible.
If you have connection problem, then syslog file is required. (please do
attach it as a file
So i'm really tired of trying to figure out the solution of this problem. I
installed the latest firmware for this router and everything seem to be working
fine but i can't connect to the internet via E3131. My internet provider is
PLAY and i'm using SIM card with disabled PIN code. The router recognize the
USB device and i'm also able to see my operator: PLAY 3g, model info: E3131 and
other stuff but when i'm trying to connect all i get is an NO CARRIER error...I
spent almost 8 Hours trying different confings, AT commands and nothing... I'm
a total newbie so if you know the solution please help me.
All logs are available in attached TXT file
heres PPP log
Look for target devices ...
No devices in target mode or class found
Look for default devices ...
product ID matched
Found devices in default mode (1)
Access device 003 on bus 001
Current configuration number is 1
Use interface number 0
Use endpoints 0x01 (out) and 0x81 (in)
USB description data (for identification)
-------------------------
Manufacturer: HUAWEI
Product: HUAWEI Mobile
Serial No.: not provided
-------------------------
Looking for active driver ...
No active driver found. Detached before or never attached
Set up interface 0
Use endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Reset response endpoint 0x81
Could not reset endpoint (probably harmless): -99
Reset message endpoint 0x01
Could not reset endpoint (probably harmless): -99
-> Run lsusb to note any changes. Bye!
Calling GPRS/UMTS/LTE
ATZ
OK
AT+CGDCONT=1,"IP","internet"
OK
ATD*90#Failed
Script /tmp/ppp/peers/wan0_chat.sh finished (pid 463), status = 0x3
Connect script failed
Calling GPRS/UMTS/LTE
ATZ
OK
AT+CGDCONT=1,"IP","internet"
OK
ATD*90#
NO CARRIERFailed (NO CARRIER)
Script /tmp/ppp/peers/wan0_chat.sh finished (pid 466), status = 0x6
Connect script failed
Calling GPRS/UMTS/LTE
ATZ
OK
AT+CGDCONT=1,"IP","internet"
OK
ATD*90#Failed
Script /tmp/ppp/peers/wan0_chat.sh finished (pid 469), status = 0x3
Connect script failed
Original issue reported on code.google.com by Bory...@gmail.com on 7 Jan 2015 at 5:38
Original issue reported on code.google.com by
Bory...@gmail.comon 7 Jan 2015 at 5:38Attachments: