search

hydromisc / hydromisc

Open hardware to measure EC and pH, drive pumps, and otherwise manage a mid-size hydroponic grow over Wi-Fi.
499 stars 29 forks source link

Added SMD tag to SMD components for centroid data output. #4

Closed kyle-goodwin closed 2 years ago

kyle-goodwin commented 2 years ago

Centroid data needed to get the boards assembled with SMD components. Added the tag to the library footprints and updated board from library.

hydromisc commented 2 years ago

Thanks, helpful. Perhaps also commit the centroid file to board/fab?

kyle-goodwin commented 2 years ago

I didn't include the output file because they sometimes need to be adjusted per board house. The place I usually use doesn't have many of the digikey parts in your BOM. Once I have a viable BOM and centroid file for a particular fab house I'll commit that to the fab directory.

hydromisc commented 2 years ago

Cool, reasonable. Let me know if you have any questions about second sources, since almost everything on that board should have some.

kyle-goodwin commented 2 years ago

I usually use JLCPCB for prototype stuff. They are extremely inexpensive but have a limited inventory. There were a couple items in the BOM that were going to be problematic. If you want to discuss it further we can do so over email or discord or whatever you like.

hydromisc commented 2 years ago

I'd suggest opening an issue if you have questions about second sources, to keep all the information in one place for anyone else reading. Also feel free to email me (hydromisc@gmail.com), though.