search

hydronics2 / 2019-easy-bee-counter

Bee-counter-easy
Other
44 stars 12 forks source link

Build Question - 9 pin 22R SIP resistor #12

Closed kyemacdonald closed 4 years ago

kyemacdonald commented 4 years ago

Hi Thomas,

I am building my first one of these and I couldn't obtain the 10pin 22R SIP resistors locally so ended up with the 9 pin options you have in your alternate parts list.

Before I solder, could you confirm which pin hole remains unconnected?

Thanks

hydronics2 commented 4 years ago

sure, you need to have the common pin connected... The common pin are marked with a square on the PCB and also indicated on the SIP with writing per the cut sheet.

[image: image.png]

On Sun, Jul 19, 2020 at 8:36 PM kyemacdonald notifications@github.com wrote:

Hi Thomas,

I am building my first one of these and I couldn't obtain the 10pin 22R SIP resistors locally so ended up with the 9 pin options you have in your alternate parts list.

Before I solder, could you confirm which pin hole remains unconnected?

Thanks

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/hydronics2/2019-easy-bee-counter/issues/12, or unsubscribe https://github.com/notifications/unsubscribe-auth/AA3MOPCNT7OQ4AJUTJBB25DR4O3VRANCNFSM4PBZ36JA .

hydronics2 commented 4 years ago

image

kyemacdonald commented 4 years ago

Thanks Thomas,

I assumed that was the case but wanted to confirm before I soldered everything up. It has taken that long for the parts to arrive I didn't want to wreck it!

hydronics2 commented 4 years ago

no sweat. good luck!