Frontman is an open-source API gateway written in Go that allows you to manage your microservices and expose them as a single API endpoint. It acts as a reverse proxy and handles requests from clients, routing them to the appropriate backend service.
[jwe] Added jwe.Settings(jwe.WithMaxDecompressBufferSize(int64)) to specify the
maximum size of a decompressed JWE payload. The default value is 10MB. If you
are compressing payloads greater than this and want to decompress it during
a call to jwe.Decrypt, you need to explicitly set a value large enough to
hold that data.
The same option can be passed to jwe.Decrypt to control this behavior on
a per-message basis.
[jwe] Added documentation stating that jwe.WithMaxBufferSize option will be
renamed in future versions, i.e. v3
v2.0.20 20 Feb 2024
[New Features]
[jwe] Added jwe.Settings(WithMaxBufferSize(int64)) to set the maximum size of
internal buffers. The default value is 256MB. Most users do not need to change
this value.
[jws] Allow jws.WithCompact() and jws.WithJSON() to be passed to jws.Parse() and
jws.Verify(). These options control the expected serialization format for the
JWS message.
[jwt] Add jwt.WithCompactOnly() to specify that only compact serialization can
be used for jwt.Parse(). Previously, by virtue of jws.Parse() allowing either
JSON or Compact serialization format, jwt.Parse() also alloed JSON serialization
where as RFC7519 explicitly states that only compact serialization should be
used. For backward compatibility the default behavior is not changed, but you
can set this global option for jwt: jwt.Settings(jwt.WithCompactOnly(true))
[Miscellaneous]
Internal key conversions should now allow private keys to be used in place of
public keys. This would allow you to pass private keys where public keys are
expected.
v2.0.19
v2.0.19 09 Jan 2024
[New Features]
* [jws] Added jws.IsVerificationError to check if the error returned by `jws.Verify`
was caused by actual verification step or something else, for example, while fetching
a key from datasource
[Security Fixes]
[jws] JWS messages formated in full JSON format (i.e. not the compact format, which
consists of three base64 strings concatenated with a '.') with missing "protected"
headers could cause a panic, thereby introducing a possiblity of a DoS.
This has been fixed so that the jws.Parse function succeeds in parsing a JWS message
lacking a protected header. Calling jws.Verify on this same JWS message will result
in a failed verification attempt. Note that this behavior will differ slightly when
parsing JWS messages in compact form, which result in an error.
</tr></table>
[jwe] Added jwe.Settings(jwe.WithMaxDecompressBufferSize(int64)) to specify the
maximum size of a decompressed JWE payload. The default value is 10MB. If you
are compressing payloads greater than this and want to decompress it during
a call to jwe.Decrypt, you need to explicitly set a value large enough to
hold that data.
The same option can be passed to jwe.Decrypt to control this behavior on
a per-message basis.
[jwe] Added documentation stating that jwe.WithMaxBufferSize option will be
renamed in future versions, i.e. v3
v2.0.20 20 Feb 2024
[New Features]
[jwe] Added jwe.Settings(WithMaxBufferSize(int64)) to set the maximum size of
internal buffers. The default value is 256MB. Most users do not need to change
this value.
[jws] Allow jws.WithCompact() and jws.WithJSON() to be passed to jws.Parse() and
jws.Verify(). These options control the expected serialization format for the
JWS message.
[jwt] Add jwt.WithCompactOnly() to specify that only compact serialization can
be used for jwt.Parse(). Previously, by virtue of jws.Parse() allowing either
JSON or Compact serialization format, jwt.Parse() also alloed JSON serialization
where as RFC7519 explicitly states that only compact serialization should be
used. For backward compatibility the default behavior is not changed, but you
can set this global option for jwt: jwt.Settings(jwt.WithCompactOnly(true))
[Miscellaneous]
Internal key conversions should now allow private keys to be used in place of
public keys. This would allow you to pass private keys where public keys are
expected.
v2.0.19 09 Jan 2024
[New Features]
[jws] Added jws.IsVerificationError to check if the error returned by jws.Verify
was caused by actual verification step or something else, for example, while fetching
a key from datasource
[Security Fixes]
[jws] JWS messages formated in full JSON format (i.e. not the compact format, which
consists of three base64 strings concatenated with a '.') with missing "protected"
headers could cause a panic, thereby introducing a possiblity of a DoS.
This has been fixed so that the jws.Parse function succeeds in parsing a JWS message
lacking a protected header. Calling jws.Verify on this same JWS message will result
in a failed verification attempt. Note that this behavior will differ slightly when
parsing JWS messages in compact form, which result in an error.
v2.0.18 03 Dec 2023
... (truncated)
Commits
611d914 Merge pull request #1091 from lestrrat-go/develop/v2
You can trigger a rebase of this PR by commenting @dependabot rebase.
Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot show ignore conditions` will show all of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
You can disable automated security fix PRs for this repo from the [Security Alerts page](https://github.com/hyperioxx/frontman/network/alerts).
Note
Automatic rebases have been disabled on this pull request as it has been open for over 30 days.
Bumps github.com/lestrrat-go/jwx/v2 from 2.0.9 to 2.0.21.
Release notes
Sourced from github.com/lestrrat-go/jwx/v2's releases.
... (truncated)
Changelog
Sourced from github.com/lestrrat-go/jwx/v2's changelog.
... (truncated)
Commits
611d914Merge pull request #1091 from lestrrat-go/develop/v2551073bfix keyset suboption documentation (#1090)cdfaccfsilence linter17e2da9Update Changesd43f2ceMerge pull request from GHSA-hj3v-m684-v259778ed27Bump golang.org/x/crypto from 0.19.0 to 0.21.0 (#1086)38d258eBump github.com/stretchr/testify from 1.8.4 to 1.9.0 (#1084)ffcb990Update httprc to v1.0.5 (#1088)c3b3a17Merge branch 'develop/v2' into v2ace7a77Update ChangesYou can trigger a rebase of this PR by commenting
@dependabot rebase.Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show