search

hz12opensource / libresdr

Firmware with overclock support for LibreSDR (PlutoSDR clone with Zynq 7020), 27.5 MSPS sample rate over Gigabit Ethernet with libiio/PlutoSDR API
GNU General Public License v3.0
59 stars 6 forks source link

login fails with given firmware. #12

Closed FPSychotic closed 2 months ago

FPSychotic commented 2 months ago

Hi, I bought this device. It has already flashed in internal memory the Pluto Firmware. The ADI chip is locked at 3.8ghz. Im trying connect via putty to unlock the 6ghz, and I need login. Official firmware is root/analog, but doesnt work , tried analog/analog, and many others , but doesn't work. Could you please tell me if it is the official firmware what is the password? Thanks

maco326 commented 2 months ago

I just checked mine and it works with root/analog... How are you trying to connect? OTG port, DEBUG port or Ethernet connection? root@192.168.2.1's password: analog Welcome to:

| \ | | | / | _ \ \ | |/ / | | | \ --.| | | | |_/ / | __/| | | | | __/ _ \--. \ | | | / | | | | || | || () /_/ / |/ /| |\ \ _| ||_,|__/__/|__/ _| _|

v0.37-dirty https://wiki.analog.com/university/tools/pluto

FPSychotic commented 2 months ago

Hi, thanks by answer, I do by OTG, I dont know setup ethernet need find how, original pluto doesn't gave, so tried usn

maco326 commented 2 months ago

OTG with putty using ssh connection type should work. DEBUG and putty using serial should work also with baud rate 115200 and correct com port selected.

I was not able to use Ethernet with factory firmware. Using the pre-built firmware from here worked: https://github.com/hz12opensource/libresdr/releases/download/v0.38/baseclock_cpu750_ddr525.tar.gz This is booted from the sd card and does not change anything. Remove the card and it boots back to factory firmware.

FPSychotic commented 2 months ago

Hi thanks, via ssh worked, but the 6ghz hack didnt work in the stock PLutoSDR image in internal memory. not sure what is, maybe is different to other sellers