issues
search
hzeller
/
bumps
BeagleBone Universal Multi Pololu Steppers
22
stars
10
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
Fixed typographical error, changed auxilliary to auxiliary in README.
#17
orthographic-pedant
opened
9 years ago
0
Discussion Thread
#16
scottjgibson
opened
9 years ago
7
Clearly mark MS1..MS3
#15
hzeller
opened
9 years ago
0
Emergency stop triggering reset
#14
hzeller
opened
9 years ago
0
Replace Polyfuse with mini-automotive
#13
hzeller
opened
9 years ago
0
Need at least one more Endstop input
#12
hzeller
opened
9 years ago
0
PWM on bogus pins
#11
hzeller
closed
9 years ago
0
PWM on bogus pins
#10
hzeller
closed
8 years ago
1
Do we need a pull-up for MS1 ?
#9
hzeller
closed
9 years ago
0
Doublecheck footprint for 100uF driver caps - size works for up to 63V caps ?
#8
hzeller
closed
9 years ago
1
Make the 10uF analog input capacitors 0805 ceramics
#7
hzeller
closed
9 years ago
0
Possibly have separate input for 5V.
#6
hzeller
closed
9 years ago
0
Don't have two but just one header per motor output
#5
hzeller
closed
9 years ago
1
q1 and q2 pinmapping, silkscreen, stepper enable pullup resistor
#4
jerkey
opened
10 years ago
0
i did my best, here it is. only changes to the schematic, you get to lay out the parts :)
#3
jerkey
closed
10 years ago
0
add lots of important bypass capacitors to schematic only
#2
jerkey
closed
10 years ago
0
add two FETs for fan and heater
#1
jerkey
closed
10 years ago
1