I have a 1/16 scan (quarter scan) 64x64 outdoor with SM16237.
Looking at other 64x64, most seem to have the E pin, but mine only has A, B, C, D. I'm getting a full white screen, image below shows white stripes when taken with the camera (but when looking with the eye it's fully white).
I have tried playing around with --led-multiplexing, --led-row-addr-type, --led-slowdown-gpio, --led-panel-type (FM6126A, FM6127), but with no success, all with same output, except --led-row-addr-type=3, gave me some flickering stripes instead of a solid white
the base command line ran, tried with the above flags mentioned:
sudo ./demo -D4 --led-rows=64 --led-cols=64
I'm using Rpi 3B+ 2017. I've tried with another 64x32 panel from adafruit and it works, so pretty sure the pinout is right
w/ DietPi
Hello,
I have a 1/16 scan (quarter scan) 64x64 outdoor with SM16237.
Looking at other 64x64, most seem to have the E pin, but mine only has A, B, C, D. I'm getting a full white screen, image below shows white stripes when taken with the camera (but when looking with the eye it's fully white).
I have tried playing around with --led-multiplexing, --led-row-addr-type, --led-slowdown-gpio, --led-panel-type (FM6126A, FM6127), but with no success, all with same output, except --led-row-addr-type=3, gave me some flickering stripes instead of a solid white
the base command line ran, tried with the above flags mentioned:
sudo ./demo -D4 --led-rows=64 --led-cols=64
I'm using Rpi 3B+ 2017. I've tried with another 64x32 panel from adafruit and it works, so pretty sure the pinout is right w/ DietPi
Thanks, in advance
Bought it on AliExpress https://www.aliexpress.us/item/3256805543853848.html?spm=a2g0o.order_list.order_list_main.10.14091802fSbc5C&gatewayAdapt=glo2usa