search

hzeller / rpi-rgb-led-matrix

Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
GNU General Public License v2.0
3.73k stars 1.18k forks source link

Where can I buy one of these? #743

Open cluelessperson opened 5 years ago

cluelessperson commented 5 years ago

I don't have the supplies/time/skills to build them myself.

hzeller commented 5 years ago

If you don't want to solder these yourself, I've heard there are compatible boards available on https://www.electrodragon.com/product/rgb-matrix-panel-drive-board-raspberry-pi/ but I have not tested them myself nor am I affiliated with them in any way.

cluelessperson commented 5 years ago

Thanks. I'll take a look and reply here if I wind up with something that works.

On Sat, Dec 29, 2018, 3:34 PM Henner Zeller <notifications@github.com wrote:

If you don't want to solder these https://github.com/hzeller/rpi-rgb-led-matrix/tree/master/adapter/active-3 yourself, I've heard there are compatible boards available on

https://www.electrodragon.com/product/rgb-matrix-panel-drive-board-raspberry-pi/ but I have not tested them myself nor am I affiliated with them in any way.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/hzeller/rpi-rgb-led-matrix/issues/743#issuecomment-450528552, or mute the thread https://github.com/notifications/unsubscribe-auth/AFX8tbJkNAyr6az2uEbwhizXbwjcFHRSks5u9_wJgaJpZM4Zkv7c .

Beersatron commented 5 years ago

I have used the ElectroDragon board quite a bit, it works well.