P10 1/4scan SMD3535 configuration

hzeller / rpi-rgb-led-matrix

Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

GNU General Public License v2.0

3.63k stars 1.15k forks source link

P10 1/4scan SMD3535 configuration #836

Open sebczech opened 5 years ago

sebczech commented 5 years ago

I am trying to get my P10 1/4scan SMD3535 led modules working. But they are only doing strange things... does someone know the configuration for these modules? I had them running some time ago, but I'm not getting the configuration again.

https://www.aliexpress.com/item/32735128260.html?spm=a2g0s.9042311.0.0.68414c4dmKP1wL

angelogoncalve commented 5 years ago

--led-rows=16 --led-multiplexing=1 or --led-rows=16 --led-row-addr-type=2 --led-multiplexing=4

sachasayan commented 5 years ago

I've added a hardware compatibility table in the Wiki, could you add notes for this panel there with settings if you've confirmed it working? ^_^

https://github.com/hzeller/rpi-rgb-led-matrix/wiki

davemaster commented 4 years ago

this works for me with those panels

--led-multiplexing=8