代号bullseye版本的armbian安装openmediavault6.x失败

[getr00t]

首先系统日志现在看不到了哦，我按了十几次都没成功我就放弃了，还有这个日志怎么看？按到99%就自动断开网络了，然后就连接不进ssh了，应该也看不到日志了吧？系统都进不去了，这里暂时只有一张当时保存的报错图。主要是报错后就进不去ssh，日志也看不到，迫不得已只有重新装系统，这里说明下omv6.x需要bullseye版本的前提下才能按[

[hzyitc]

可能是ip变了

[getr00t]

可能是ip变了

我已经排除了ip变了的问题，我直接进的路由器和内网扫描ip,压根就发现不了ip或主机名。

[hzyitc]

脚本安装的?

[getr00t]

脚本安装的?

非脚本安装，官网的教程按的https://openmediavault.readthedocs.io/en/latest/installation/on_debian.html 我使用buster版本的时候使用过一键安装脚本也没出现过这情况，都可以按成功。

[hzyitc]

确定了，安装过程中会重启ssh,可能会导致脚本失败。

请使用tmux或screen

[getr00t]

确定了，安装过程中会失败ssh，可能会导致脚本。

请使用tmux或screen

啥意思，不太明白，是说的终端还不能使用其它的吗?必须使用tmux或`screen',其它终端会导致ssh断开吗，从而导致安装脚本失败?

[hzyitc]

ssh断开的时候会发送SIGHUP给当前程序，让他停止。

你搜下这两软件就知道了。

[getr00t]

ssh断开的时候会发送SIGHUP给当前程序，让他停止。

你搜下这两软件就知道了。

我不确定你是不是说的这个意思，我尝试了下tmux，还是会断开ssh，断开后导致整个系统无法正常启动，路由器里面也获取不到ip,判断系统启动失败，被破坏，从而需要重新刷机。

[hzyitc]

都会断开，但tmux能在断开后继续跑脚本，同时在之后可以使用tmux attach重新恢复原来的窗口。

[hzyitc]

我跑了一遍，ip并没有改变，只是ssh重启而已。ping是正常的

[getr00t]

我跑了一遍，ip并没有改变，只是ssh重启而已。ping是正常的

你使用的哪个固件包？我使用的是Armbian_22.08.0-trunk_Onecloud_bullseye_edge_5.18.0，不知道给这个包是不是有关系，我的ssh断开后，内网我扫描和进路由器看都是获取不到机器ip的，所以没有ip就连接不上ssh，也没办法使用tmux attach恢复原来窗口，我只有在次刷机，反复复现这个问题，很无奈。

[hzyitc]

ssh断开后等一会再试试，他那流程挺慢的。

ping的话一直正常。

[getr00t]

ssh断开后等一会再试试，他那流程挺慢的。

ping的话一直正常。

我等了很久，也没用出现ip,所以你的是把omv6.x刷成功了吗？

[hzyitc]

是的，我的意思是还是原来的ip

[getr00t]

是的，我的意思是还是原来的ip

我始终是没有安装成功omv6.x，断开ssh后我等了几个小时，也没有扫描到机器的ip，我尝试ping主机名onecloud,也ping不通，不知道老铁你是咋安装成功的，并成功运行起来的，还请你指教。

[hzyitc]

你连接上hdmi和键盘吧，这样能直接看到安装日志

[hzyitc]

你是V1.0的板子吗，如果是有可能是 #16 导致的

[indiboy]

是的，接上显示器，安装到最后一步应该是，断开后一直重启（不应该是重启），或者说是logo一直闪。

[getr00t]

你是V1.0的板子吗，如果是有可能是 #16 导致的

我的是V1.3的主板，目前手上没有显示器，也没连接hdmi测试，所以也没法看日志，我也就不知道你咋按成功的了

[getr00t]

是的，接上显示器，安装到最后一步应该是，断开后一直重启（不应该是重启），或者说是logo一直闪。

你也按了omv6.x?遇到一样问题？你连接显示器看到日志了嘛？传一份报错日志，方便作者优化更新

[indiboy]

不好意思连接上hdmi后没看着安装，也不知道报什么错误。 看日志的话先不要写入EMMC,出错后直接插U盘到电脑，用DiskGenius打开 就可以查看相关的文件了。

[getr00t]

不好意思连接上hdmi后没看着安装，也不知道报什么错误。 看日志的话先不要写入EMMC,出错后直接插U盘到电脑，用DiskGenius打开 就可以查看相关的文件了。

那你按成功了吗？使用代号bullseye的版本按6.x?我主要是没用显示器连接不了hdmi，看不到日志，你方便可以测试下看看日志，是不是又错误。你按装过程中，没有强制退出ssh？

[waldoxhm]

我刷了最新版固件，先是ssh安装，用的armbian里的softy脚本装的，也是无限重启黑屏。然后就考虑是ssh断了，然后hdmi装了，也是这样，还试过omv论坛里的debian11安装方法，也没有成功，同样是黑屏。1.3主板

[hzyitc]

我用的是官方教程

[soulant]

#对omv6安装失败的修复
#安装方式：官方脚本修复
#失败原因：watchdog 脚本默认15% 实际不大于8%

#安装步骤：
#将文件解压到/root目录
bash omv6fix.sh

#出现以下信息，直接重启即可
# Error applying network changes.  Skipping reboot!
shutdown -r now

文件附件

[waldoxhm]

#对omv6安装失败的修复
#安装方式：官方脚本修复
#失败原因：watchdog 脚本默认15% 实际不大于8%

#安装步骤：
#将文件解压到/root目录
bash omv6fix.sh

#官方脚本安装过程中有不少错误和警告，最终出现以下信息，基本安装成功，直接重启即可
Error applying network changes.  Skipping reboot!
shutdown -r now

#其它说明：
# 使用官方命令直接安装时可注释# script setup以下全部内容，运行脚本后再根据官方教程使用命令安装
# 官方脚本网卡默认使用netplan，但使用时因生成参数可能发生变化导致直接无网，故还是保留了networkmanager

文件附件

实测可以解决问题，可以close了

[getr00t]

#对omv6安装失败的修复
#安装方式：官方脚本修复
#失败原因：watchdog 脚本默认15% 实际不大于8%

#安装步骤：
#将文件解压到/root目录
bash omv6fix.sh

#出现以下信息，直接重启即可
# Error applying network changes.  Skipping reboot!
shutdown -r now

文件附件

你发现安装插件经常按到一半就会503报错吗?你们的会不会？这算bug?

[indiboy]

脚本无问题应该，我测试了没问题，你换成国内源试试

[Bet5521]

我是直接使用的armbian-config 安装omv，最后提示成功，咨询是否重启，重启以后就起不来了，插显示器发现一直重启。没办法进入系统。

[hzyitc]

失败原因：watchdog 脚本默认15% 实际不大于8%

单位是s(秒)，而不是百分比。

Ubuntu请勿启用systemd的watchdog，systemd在最初的启动阶段并不能持续的喂狗。会触发重启的。

[qianxuu]

我今天尝试安装也遇到了问题，想知道怎么解决

Samba is not being run as an AD Domain Controller: Masking samba-ad-dc.service
Please ignore the following error about deb-systemd-helper not finding those services.
(samba-ad-dc.service masked)
Created symlink /etc/systemd/system/multi-user.target.wants/nmbd.service → /lib/systemd/system/nmbd.service.
Failed to preset unit: Unit file /etc/systemd/system/samba-ad-dc.service is masked.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on samba-ad-dc.service: No such file or directory
Created symlink /etc/systemd/system/multi-user.target.wants/smbd.service → /lib/systemd/system/smbd.service.
samba-ad-dc.service is a disabled or a static unit, not starting it.
Setting up wsdd (0.7+gitc87819b) ...
Created symlink /etc/systemd/system/multi-user.target.wants/wsdd.service → /lib/systemd/system/wsdd.service.
Setting up liblvm2cmd2.03:armhf (2.03.11-2.1) ...
Setting up dmeventd (2:1.02.175-2.1) ...
Created symlink /etc/systemd/system/sockets.target.wants/dm-event.socket → /lib/systemd/system/dm-event.socket.
dm-event.service is a disabled or a static unit, not starting it.
Setting up lvm2 (2.03.11-2.1) ...
update-initramfs: deferring update (trigger activated)
Created symlink /etc/systemd/system/sysinit.target.wants/blk-availability.service → /lib/systemd/system/blk-availability.service.
Created symlink /etc/systemd/system/sysinit.target.wants/lvm2-monitor.service → /lib/systemd/system/lvm2-monitor.service.
Created symlink /etc/systemd/system/sysinit.target.wants/lvm2-lvmpolld.socket → /lib/systemd/system/lvm2-lvmpolld.socket.
Setting up openmediavault (6.0.46-1) ...
Creating users/groups ...
Updating local package archive ...
Updating service units ...
Failed to preset unit: Unit file /etc/systemd/system/systemd-networkd.service is masked.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on systemd-networkd.service: No such file or directory
dpkg: error processing package openmediavault (--configure):
 installed openmediavault package post-installation script subprocess returned error exit status 1
Processing triggers for libc-bin (2.31-13+deb11u5) ...
Processing triggers for rsyslog (8.2102.0-2+deb11u1) ...
Processing triggers for dbus (1.12.24-0+deb11u1) ...
Processing triggers for initramfs-tools (0.140) ...
ln: failed to create hard link '/boot/initrd.img-5.15.74-meson.dpkg-bak' => '/boot/initrd.img-5.15.74-meson': Operation not permitted
update-initramfs: Generating /boot/initrd.img-5.15.74-meson
update-initramfs: Converting to u-boot format
Processing triggers for php7.4-cli (7.4.30-1+deb11u1) ...
Processing triggers for php7.4-fpm (7.4.30-1+deb11u1) ...
Processing triggers for php7.4-cgi (7.4.30-1+deb11u1) ...
Errors were encountered while processing:
 openmediavault
E: Sub-process /usr/bin/dpkg returned an error code (1)
failed to install openmediavault package.

[getr00t]

我今天尝试安装也遇到了问题，想怎么解决

Samba is not being run as an AD Domain Controller: Masking samba-ad-dc.service
Please ignore the following error about deb-systemd-helper not finding those services.
(samba-ad-dc.service masked)
Created symlink /etc/systemd/system/multi-user.target.wants/nmbd.service → /lib/systemd/system/nmbd.service.
Failed to preset unit: Unit file /etc/systemd/system/samba-ad-dc.service is masked.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on samba-ad-dc.service: No such file or directory
Created symlink /etc/systemd/system/multi-user.target.wants/smbd.service → /lib/systemd/system/smbd.service.
samba-ad-dc.service is a disabled or a static unit, not starting it.
Setting up wsdd (0.7+gitc87819b) ...
Created symlink /etc/systemd/system/multi-user.target.wants/wsdd.service → /lib/systemd/system/wsdd.service.
Setting up liblvm2cmd2.03:armhf (2.03.11-2.1) ...
Setting up dmeventd (2:1.02.175-2.1) ...
Created symlink /etc/systemd/system/sockets.target.wants/dm-event.socket → /lib/systemd/system/dm-event.socket.
dm-event.service is a disabled or a static unit, not starting it.
Setting up lvm2 (2.03.11-2.1) ...
update-initramfs: deferring update (trigger activated)
Created symlink /etc/systemd/system/sysinit.target.wants/blk-availability.service → /lib/systemd/system/blk-availability.service.
Created symlink /etc/systemd/system/sysinit.target.wants/lvm2-monitor.service → /lib/systemd/system/lvm2-monitor.service.
Created symlink /etc/systemd/system/sysinit.target.wants/lvm2-lvmpolld.socket → /lib/systemd/system/lvm2-lvmpolld.socket.
Setting up openmediavault (6.0.46-1) ...
Creating users/groups ...
Updating local package archive ...
Updating service units ...
Failed to preset unit: Unit file /etc/systemd/system/systemd-networkd.service is masked.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on systemd-networkd.service: No such file or directory
dpkg: error processing package openmediavault (--configure):
 installed openmediavault package post-installation script subprocess returned error exit status 1
Processing triggers for libc-bin (2.31-13+deb11u5) ...
Processing triggers for rsyslog (8.2102.0-2+deb11u1) ...
Processing triggers for dbus (1.12.24-0+deb11u1) ...
Processing triggers for initramfs-tools (0.140) ...
ln: failed to create hard link '/boot/initrd.img-5.15.74-meson.dpkg-bak' => '/boot/initrd.img-5.15.74-meson': Operation not permitted
update-initramfs: Generating /boot/initrd.img-5.15.74-meson
update-initramfs: Converting to u-boot format
Processing triggers for php7.4-cli (7.4.30-1+deb11u1) ...
Processing triggers for php7.4-fpm (7.4.30-1+deb11u1) ...
Processing triggers for php7.4-cgi (7.4.30-1+deb11u1) ...
Errors were encountered while processing:
 openmediavault
E: Sub-process /usr/bin/dpkg returned an error code (1)
failed to install openmediavault package.

你这是啥故障现象？也是一直获取不到ip，无法重启成功？如果是的话，那么你可以看看https://github.com/hzyitc/armbian-onecloud/issues/14#issuecomment-1164871640

[qianxuu]

我今天尝试安装也遇到了问题，想怎么解决

Samba is not being run as an AD Domain Controller: Masking samba-ad-dc.service
Please ignore the following error about deb-systemd-helper not finding those services.
(samba-ad-dc.service masked)
Created symlink /etc/systemd/system/multi-user.target.wants/nmbd.service → /lib/systemd/system/nmbd.service.
Failed to preset unit: Unit file /etc/systemd/system/samba-ad-dc.service is masked.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on samba-ad-dc.service: No such file or directory
Created symlink /etc/systemd/system/multi-user.target.wants/smbd.service → /lib/systemd/system/smbd.service.
samba-ad-dc.service is a disabled or a static unit, not starting it.
Setting up wsdd (0.7+gitc87819b) ...
Created symlink /etc/systemd/system/multi-user.target.wants/wsdd.service → /lib/systemd/system/wsdd.service.
Setting up liblvm2cmd2.03:armhf (2.03.11-2.1) ...
Setting up dmeventd (2:1.02.175-2.1) ...
Created symlink /etc/systemd/system/sockets.target.wants/dm-event.socket → /lib/systemd/system/dm-event.socket.
dm-event.service is a disabled or a static unit, not starting it.
Setting up lvm2 (2.03.11-2.1) ...
update-initramfs: deferring update (trigger activated)
Created symlink /etc/systemd/system/sysinit.target.wants/blk-availability.service → /lib/systemd/system/blk-availability.service.
Created symlink /etc/systemd/system/sysinit.target.wants/lvm2-monitor.service → /lib/systemd/system/lvm2-monitor.service.
Created symlink /etc/systemd/system/sysinit.target.wants/lvm2-lvmpolld.socket → /lib/systemd/system/lvm2-lvmpolld.socket.
Setting up openmediavault (6.0.46-1) ...
Creating users/groups ...
Updating local package archive ...
Updating service units ...
Failed to preset unit: Unit file /etc/systemd/system/systemd-networkd.service is masked.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on systemd-networkd.service: No such file or directory
dpkg: error processing package openmediavault (--configure):
 installed openmediavault package post-installation script subprocess returned error exit status 1
Processing triggers for libc-bin (2.31-13+deb11u5) ...
Processing triggers for rsyslog (8.2102.0-2+deb11u1) ...
Processing triggers for dbus (1.12.24-0+deb11u1) ...
Processing triggers for initramfs-tools (0.140) ...
ln: failed to create hard link '/boot/initrd.img-5.15.74-meson.dpkg-bak' => '/boot/initrd.img-5.15.74-meson': Operation not permitted
update-initramfs: Generating /boot/initrd.img-5.15.74-meson
update-initramfs: Converting to u-boot format
Processing triggers for php7.4-cli (7.4.30-1+deb11u1) ...
Processing triggers for php7.4-fpm (7.4.30-1+deb11u1) ...
Processing triggers for php7.4-cgi (7.4.30-1+deb11u1) ...
Errors were encountered while processing:
 openmediavault
E: Sub-process /usr/bin/dpkg returned an error code (1)
failed to install openmediavault package.

你这是啥故障现象？也是一直获取不到ip，无法重启成功？如果是的话，那么你可以看看#14 (comment)

我把systemd-networkd.service给 unmask 后，再用那个脚本成功安装了

[getr00t]

我今天尝试安装也遇到了问题，想怎么解决

Samba is not being run as an AD Domain Controller: Masking samba-ad-dc.service
Please ignore the following error about deb-systemd-helper not finding those services.
(samba-ad-dc.service masked)
Created symlink /etc/systemd/system/multi-user.target.wants/nmbd.service → /lib/systemd/system/nmbd.service.
Failed to preset unit: Unit file /etc/systemd/system/samba-ad-dc.service is masked.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on samba-ad-dc.service: No such file or directory
Created symlink /etc/systemd/system/multi-user.target.wants/smbd.service → /lib/systemd/system/smbd.service.
samba-ad-dc.service is a disabled or a static unit, not starting it.
Setting up wsdd (0.7+gitc87819b) ...
Created symlink /etc/systemd/system/multi-user.target.wants/wsdd.service → /lib/systemd/system/wsdd.service.
Setting up liblvm2cmd2.03:armhf (2.03.11-2.1) ...
Setting up dmeventd (2:1.02.175-2.1) ...
Created symlink /etc/systemd/system/sockets.target.wants/dm-event.socket → /lib/systemd/system/dm-event.socket.
dm-event.service is a disabled or a static unit, not starting it.
Setting up lvm2 (2.03.11-2.1) ...
update-initramfs: deferring update (trigger activated)
Created symlink /etc/systemd/system/sysinit.target.wants/blk-availability.service → /lib/systemd/system/blk-availability.service.
Created symlink /etc/systemd/system/sysinit.target.wants/lvm2-monitor.service → /lib/systemd/system/lvm2-monitor.service.
Created symlink /etc/systemd/system/sysinit.target.wants/lvm2-lvmpolld.socket → /lib/systemd/system/lvm2-lvmpolld.socket.
Setting up openmediavault (6.0.46-1) ...
Creating users/groups ...
Updating local package archive ...
Updating service units ...
Failed to preset unit: Unit file /etc/systemd/system/systemd-networkd.service is masked.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on systemd-networkd.service: No such file or directory
dpkg: error processing package openmediavault (--configure):
 installed openmediavault package post-installation script subprocess returned error exit status 1
Processing triggers for libc-bin (2.31-13+deb11u5) ...
Processing triggers for rsyslog (8.2102.0-2+deb11u1) ...
Processing triggers for dbus (1.12.24-0+deb11u1) ...
Processing triggers for initramfs-tools (0.140) ...
ln: failed to create hard link '/boot/initrd.img-5.15.74-meson.dpkg-bak' => '/boot/initrd.img-5.15.74-meson': Operation not permitted
update-initramfs: Generating /boot/initrd.img-5.15.74-meson
update-initramfs: Converting to u-boot format
Processing triggers for php7.4-cli (7.4.30-1+deb11u1) ...
Processing triggers for php7.4-fpm (7.4.30-1+deb11u1) ...
Processing triggers for php7.4-cgi (7.4.30-1+deb11u1) ...
Errors were encountered while processing:
 openmediavault
E: Sub-process /usr/bin/dpkg returned an error code (1)
failed to install openmediavault package.

你这是啥故障现象？也是一直获取不到ip，无法重启成功？如果是的话，那么你可以看看#14 (comment)

我把systemd-networkd.service给 unmask 后，再用那个脚本成功安装了

我把systemd-networkd.service给 unmask 后?为什么要这么做啊？直接使用#14楼的脚本就好了吧。反正最终目的解决问题就是好的

[qianxuu]

我今天尝试安装也遇到了问题，想怎么解决

Samba is not being run as an AD Domain Controller: Masking samba-ad-dc.service
Please ignore the following error about deb-systemd-helper not finding those services.
(samba-ad-dc.service masked)
Created symlink /etc/systemd/system/multi-user.target.wants/nmbd.service → /lib/systemd/system/nmbd.service.
Failed to preset unit: Unit file /etc/systemd/system/samba-ad-dc.service is masked.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on samba-ad-dc.service: No such file or directory
Created symlink /etc/systemd/system/multi-user.target.wants/smbd.service → /lib/systemd/system/smbd.service.
samba-ad-dc.service is a disabled or a static unit, not starting it.
Setting up wsdd (0.7+gitc87819b) ...
Created symlink /etc/systemd/system/multi-user.target.wants/wsdd.service → /lib/systemd/system/wsdd.service.
Setting up liblvm2cmd2.03:armhf (2.03.11-2.1) ...
Setting up dmeventd (2:1.02.175-2.1) ...
Created symlink /etc/systemd/system/sockets.target.wants/dm-event.socket → /lib/systemd/system/dm-event.socket.
dm-event.service is a disabled or a static unit, not starting it.
Setting up lvm2 (2.03.11-2.1) ...
update-initramfs: deferring update (trigger activated)
Created symlink /etc/systemd/system/sysinit.target.wants/blk-availability.service → /lib/systemd/system/blk-availability.service.
Created symlink /etc/systemd/system/sysinit.target.wants/lvm2-monitor.service → /lib/systemd/system/lvm2-monitor.service.
Created symlink /etc/systemd/system/sysinit.target.wants/lvm2-lvmpolld.socket → /lib/systemd/system/lvm2-lvmpolld.socket.
Setting up openmediavault (6.0.46-1) ...
Creating users/groups ...
Updating local package archive ...
Updating service units ...
Failed to preset unit: Unit file /etc/systemd/system/systemd-networkd.service is masked.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on systemd-networkd.service: No such file or directory
dpkg: error processing package openmediavault (--configure):
 installed openmediavault package post-installation script subprocess returned error exit status 1
Processing triggers for libc-bin (2.31-13+deb11u5) ...
Processing triggers for rsyslog (8.2102.0-2+deb11u1) ...
Processing triggers for dbus (1.12.24-0+deb11u1) ...
Processing triggers for initramfs-tools (0.140) ...
ln: failed to create hard link '/boot/initrd.img-5.15.74-meson.dpkg-bak' => '/boot/initrd.img-5.15.74-meson': Operation not permitted
update-initramfs: Generating /boot/initrd.img-5.15.74-meson
update-initramfs: Converting to u-boot format
Processing triggers for php7.4-cli (7.4.30-1+deb11u1) ...
Processing triggers for php7.4-fpm (7.4.30-1+deb11u1) ...
Processing triggers for php7.4-cgi (7.4.30-1+deb11u1) ...
Errors were encountered while processing:
 openmediavault
E: Sub-process /usr/bin/dpkg returned an error code (1)
failed to install openmediavault package.

你这是啥故障现象？也是一直获取不到ip，无法重启成功？如果是的话，那么你可以看看#14 (comment)

我把systemd-networkd.service给 unmask 后，再用那个脚本成功安装了

我把systemd-networkd.service给 unmask 后?为什么要这么做啊？直接使用#14楼的脚本就好了吧。反正最终目的解决问题就是好的

不 unmask 就会像使用官方未修改脚本一样，报错

Failed to preset unit: Unit file /etc/systemd/system/systemd-networkd.service is masked.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on systemd-networkd.service: No such file or directory
dpkg: error processing package openmediavault (--configure):
 installed openmediavault package post-installation script subprocess returned error exit status 1

那个脚本解决的是安装后无法开机的问题，我是直接安装就报错

[getr00t]

我今天尝试安装也遇到了问题，想怎么解决

Samba is not being run as an AD Domain Controller: Masking samba-ad-dc.service
Please ignore the following error about deb-systemd-helper not finding those services.
(samba-ad-dc.service masked)
Created symlink /etc/systemd/system/multi-user.target.wants/nmbd.service → /lib/systemd/system/nmbd.service.
Failed to preset unit: Unit file /etc/systemd/system/samba-ad-dc.service is masked.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on samba-ad-dc.service: No such file or directory
Created symlink /etc/systemd/system/multi-user.target.wants/smbd.service → /lib/systemd/system/smbd.service.
samba-ad-dc.service is a disabled or a static unit, not starting it.
Setting up wsdd (0.7+gitc87819b) ...
Created symlink /etc/systemd/system/multi-user.target.wants/wsdd.service → /lib/systemd/system/wsdd.service.
Setting up liblvm2cmd2.03:armhf (2.03.11-2.1) ...
Setting up dmeventd (2:1.02.175-2.1) ...
Created symlink /etc/systemd/system/sockets.target.wants/dm-event.socket → /lib/systemd/system/dm-event.socket.
dm-event.service is a disabled or a static unit, not starting it.
Setting up lvm2 (2.03.11-2.1) ...
update-initramfs: deferring update (trigger activated)
Created symlink /etc/systemd/system/sysinit.target.wants/blk-availability.service → /lib/systemd/system/blk-availability.service.
Created symlink /etc/systemd/system/sysinit.target.wants/lvm2-monitor.service → /lib/systemd/system/lvm2-monitor.service.
Created symlink /etc/systemd/system/sysinit.target.wants/lvm2-lvmpolld.socket → /lib/systemd/system/lvm2-lvmpolld.socket.
Setting up openmediavault (6.0.46-1) ...
Creating users/groups ...
Updating local package archive ...
Updating service units ...
Failed to preset unit: Unit file /etc/systemd/system/systemd-networkd.service is masked.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on systemd-networkd.service: No such file or directory
dpkg: error processing package openmediavault (--configure):
 installed openmediavault package post-installation script subprocess returned error exit status 1
Processing triggers for libc-bin (2.31-13+deb11u5) ...
Processing triggers for rsyslog (8.2102.0-2+deb11u1) ...
Processing triggers for dbus (1.12.24-0+deb11u1) ...
Processing triggers for initramfs-tools (0.140) ...
ln: failed to create hard link '/boot/initrd.img-5.15.74-meson.dpkg-bak' => '/boot/initrd.img-5.15.74-meson': Operation not permitted
update-initramfs: Generating /boot/initrd.img-5.15.74-meson
update-initramfs: Converting to u-boot format
Processing triggers for php7.4-cli (7.4.30-1+deb11u1) ...
Processing triggers for php7.4-fpm (7.4.30-1+deb11u1) ...
Processing triggers for php7.4-cgi (7.4.30-1+deb11u1) ...
Errors were encountered while processing:
 openmediavault
E: Sub-process /usr/bin/dpkg returned an error code (1)
failed to install openmediavault package.

你这是啥故障现象？也是一直获取不到ip，无法重启成功？如果是的话，那么你可以看看#14 (comment)

我把systemd-networkd.service给 unmask 后，再用那个脚本成功安装了

我把systemd-networkd.service给 unmask 后?为什么要这么做啊？直接使用#14楼的脚本就好了吧。反正最终目的解决问题就是好的

不 unmask 就会像使用官方未修改脚本一样，报错

Failed to preset unit: Unit file /etc/systemd/system/systemd-networkd.service is masked.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on systemd-networkd.service: No such file or directory
dpkg: error processing package openmediavault (--configure):
 installed openmediavault package post-installation script subprocess returned error exit status 1

那个脚本解决的是安装后无法开机的问题，我是直接安装就报错

不是吧，又那么邪乎吗？你看看楼上我也放了官方安装教程，系统是有要求的，不应该出现其它问题吧，至少我没有遇到你的问题，我最后还是按成功了的，要安装6.0的话一定注意你的系统版本

[chenychong]

omv 安装成功

[chenychong]

主机名 onecloud 版本 6.3.3-1 (Shaitan) 处理器 ARMv7 Processor rev 1 (v7l) 内核 Linux 5.15.93-meson 系统时间 Sun Mar 12 21:38:41 2023 运行时间 5小时

[chenychong]

Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C.UTF-8; export LANGUAGE=; omv-installdocker docker install': Docker storage :: /var/lib/docker Agent port:: 8000 Web port:: 9000 Yacht port:: 8001 ee:: 0 image:: portainer/portainer-ce Enable TLS:: 0 arch :: armhf option :: docker state :: install extras :: 6.1.1 DNS OK. Create override directory ... Create override file ... mode of '/etc/systemd/system/docker.service.d/waitAllMounts.conf' changed from 0666 (rw-rw-rw-) to 0644 (rw-r--r--) Reload systemd daemon ... Get:1 file:/var/cache/openmediavault/archives InRelease Ign:1 file:/var/cache/openmediavault/archives InRelease Get:2 file:/var/cache/openmediavault/archives Release Ign:2 file:/var/cache/openmediavault/archives Release Get:3 file:/var/cache/openmediavault/archives Packages Ign:3 file:/var/cache/openmediavault/archives Packages Get:4 file:/var/cache/openmediavault/archives Contents (deb) Ign:4 file:/var/cache/openmediavault/archives Contents (deb) Get:5 file:/var/cache/openmediavault/archives Contents (deb) Ign:5 file:/var/cache/openmediavault/archives Contents (deb) Get:3 file:/var/cache/openmediavault/archives Packages Ign:3 file:/var/cache/openmediavault/archives Packages Get:4 file:/var/cache/openmediavault/archives Contents (deb) Ign:4 file:/var/cache/openmediavault/archives Contents (deb) Get:5 file:/var/cache/openmediavault/archives Contents (deb) Ign:5 file:/var/cache/openmediavault/archives Contents (deb) Get:3 file:/var/cache/openmediavault/archives Packages Ign:3 file:/var/cache/openmediavault/archives Packages Get:4 file:/var/cache/openmediavault/archives Contents (deb) Ign:4 file:/var/cache/openmediavault/archives Contents (deb) Get:5 file:/var/cache/openmediavault/archives Contents (deb) Ign:5 file:/var/cache/openmediavault/archives Contents (deb) Get:3 file:/var/cache/openmediavault/archives Packages Ign:3 file:/var/cache/openmediavault/archives Packages Get:4 file:/var/cache/openmediavault/archives Contents (deb) Ign:4 file:/var/cache/openmediavault/archives Contents (deb) Get:5 file:/var/cache/openmediavault/archives Contents (deb) Ign:5 file:/var/cache/openmediavault/archives Contents (deb) Get:3 file:/var/cache/openmediavault/archives Packages Ign:3 file:/var/cache/openmediavault/archives Packages Get:4 file:/var/cache/openmediavault/archives Contents (deb) Ign:4 file:/var/cache/openmediavault/archives Contents (deb) Get:5 file:/var/cache/openmediavault/archives Contents (deb) Ign:5 file:/var/cache/openmediavault/archives Contents (deb) Get:3 file:/var/cache/openmediavault/archives Packages Ign:3 file:/var/cache/openmediavault/archives Packages Get:4 file:/var/cache/openmediavault/archives Contents (deb) Ign:4 file:/var/cache/openmediavault/archives Contents (deb) Get:5 file:/var/cache/openmediavault/archives Contents (deb) Ign:5 file:/var/cache/openmediavault/archives Contents (deb) Get:3 file:/var/cache/openmediavault/archives Packages Get:4 file:/var/cache/openmediavault/archives Contents (deb) Ign:4 file:/var/cache/openmediavault/archives Contents (deb) Get:5 file:/var/cache/openmediavault/archives Contents (deb) Ign:5 file:/var/cache/openmediavault/archives Contents (deb) Hit:6 http://deb.debian.org/debian bullseye InRelease Hit:7 http://deb.debian.org/debian bullseye-updates InRelease Get:8 http://security.debian.org bullseye-security InRelease [48.4 kB] Hit:9 http://packages.openmediavault.org/public shaitan InRelease Hit:10 https://download.docker.com/linux/debian bullseye InRelease Hit:11 https://openmediavault-plugin-developers.github.io/packages/debian shaitan InRelease Hit:13 https://openmediavault.github.io/packages shaitan InRelease Hit:12 http://mirrors.tuna.tsinghua.edu.cn/armbian bullseye InRelease Get:14 http://security.debian.org/debian-security bullseye-security InRelease [48.4 kB] Hit:15 http://httpredir.debian.org/debian bullseye-backports InRelease Fetched 96.7 kB in 7s (13.3 kB/s) Reading package lists...

Reading package lists...

Building dependency tree...

Reading state information...

The following additional packages will be installed: containerd.io docker-ce-cli Suggested packages: cgroupfs-mount | cgroup-lite Recommended packages: apparmor docker-ce-rootless-extras libltdl7 pigz docker-buildx-plugin The following NEW packages will be installed: containerd.io docker-ce docker-ce-cli docker-compose-plugin 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 55.4 MB of archives. After this operation, 235 MB of additional disk space will be used. Get:1 https://download.docker.com/linux/debian bullseye/stable armhf containerd.io armhf 1.6.18-1 [20.7 MB] Get:2 https://download.docker.com/linux/debian bullseye/stable armhf docker-ce-cli armhf 5:23.0.1-1~debian.11~bullseye [12.0 MB] Get:3 https://download.docker.com/linux/debian bullseye/stable armhf docker-ce armhf 5:23.0.1-1~debian.11~bullseye [13.9 MB] Get:4 https://download.docker.com/linux/debian bullseye/stable armhf docker-compose-plugin armhf 2.16.0-1~debian.11~bullseye [8738 kB] Fetched 55.4 MB in 13s (4286 kB/s) Selecting previously unselected package containerd.io. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 48067 files and directories currently installed.) Preparing to unpack .../containerd.io_1.6.18-1_armhf.deb ... Unpacking containerd.io (1.6.18-1) ... Selecting previously unselected package docker-ce-cli. Preparing to unpack .../docker-ce-cli_5%3a23.0.1-1~debian.11~bullseye_armhf.deb ... Unpacking docker-ce-cli (5:23.0.1-1~debian.11~bullseye) ... Selecting previously unselected package docker-ce. Preparing to unpack .../docker-ce_5%3a23.0.1-1~debian.11~bullseye_armhf.deb ... Unpacking docker-ce (5:23.0.1-1~debian.11~bullseye) ... Selecting previously unselected package docker-compose-plugin. Preparing to unpack .../docker-compose-plugin_2.16.0-1~debian.11~bullseye_armhf.deb ... Unpacking docker-compose-plugin (2.16.0-1~debian.11~bullseye) ... Setting up containerd.io (1.6.18-1) ... Created symlink /etc/systemd/system/multi-user.target.wants/containerd.service → /lib/systemd/system/containerd.service. Setting up docker-compose-plugin (2.16.0-1~debian.11~bullseye) ... Setting up docker-ce-cli (5:23.0.1-1~debian.11~bullseye) ... Setting up docker-ce (5:23.0.1-1~debian.11~bullseye) ... Created symlink /etc/systemd/system/multi-user.target.wants/docker.service → /lib/systemd/system/docker.service. Created symlink /etc/systemd/system/sockets.target.wants/docker.socket → /lib/systemd/system/docker.socket. Job for docker.service failed because the control process exited with error code. See "systemctl status docker.service" and "journalctl -xe" for details. invoke-rc.d: initscript docker, action "start" failed. ● docker.service - Docker Application Container Engine Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled) Drop-In: /etc/systemd/system/docker.service.d └─waitAllMounts.conf Active: activating (auto-restart) (Result: exit-code) since Sun 2023-03-12 21:29:10 CST; 37ms ago TriggeredBy: ● docker.socket Docs: https://docs.docker.com Process: 15309 ExecStart=/usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock (code=exited, status=1/FAILURE) Main PID: 15309 (code=exited, status=1/FAILURE) CPU: 836ms dpkg: error processing package docker-ce (--configure): installed docker-ce package post-installation script subprocess returned error exit status 1 Processing triggers for man-db (2.9.4-2) ... Errors were encountered while processing: docker-ce Failed to install docker. Try fixing install... Reading package lists...

Building dependency tree...

Reading state information...

0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up docker-ce (5:23.0.1-1~debian.11~bullseye) ... Job for docker.service failed because the control process exited with error code. See "systemctl status docker.service" and "journalctl -xe" for details. invoke-rc.d: initscript docker, action "start" failed. ● docker.service - Docker Application Container Engine Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled) Drop-In: /etc/systemd/system/docker.service.d └─waitAllMounts.conf Active: activating (auto-restart) (Result: exit-code) since Sun 2023-03-12 21:30:04 CST; 39ms ago TriggeredBy: ● docker.socket Docs: https://docs.docker.com Process: 16637 ExecStart=/usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock (code=exited, status=1/FAILURE) Main PID: 16637 (code=exited, status=1/FAILURE) CPU: 775ms dpkg: error processing package docker-ce (--configure): installed docker-ce package post-installation script subprocess returned error exit status 1 Errors were encountered while processing: docker-ce Unable to fix docker install.

OMV\ExecException: Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C.UTF-8; export LANGUAGE=; omv-installdocker docker install': Docker storage :: /var/lib/docker Agent port:: 8000 Web port:: 9000 Yacht port:: 8001 ee:: 0 image:: portainer/portainer-ce Enable TLS:: 0 arch :: armhf option :: docker state :: install extras :: 6.1.1 DNS OK. Create override directory ... Create override file ... mode of '/etc/systemd/system/docker.service.d/waitAllMounts.conf' changed from 0666 (rw-rw-rw-) to 0644 (rw-r--r--) Reload systemd daemon ... Get:1 file:/var/cache/openmediavault/archives InRelease Ign:1 file:/var/cache/openmediavault/archives InRelease Get:2 file:/var/cache/openmediavault/archives Release Ign:2 file:/var/cache/openmediavault/archives Release Get:3 file:/var/cache/openmediavault/archives Packages Ign:3 file:/var/cache/openmediavault/archives Packages Get:4 file:/var/cache/openmediavault/archives Contents (deb) Ign:4 file:/var/cache/openmediavault/archives Contents (deb) Get:5 file:/var/cache/openmediavault/archives Contents (deb) Ign:5 file:/var/cache/openmediavault/archives Contents (deb) Get:3 file:/var/cache/openmediavault/archives Packages Ign:3 file:/var/cache/openmediavault/archives Packages Get:4 file:/var/cache/openmediavault/archives Contents (deb) Ign:4 file:/var/cache/openmediavault/archives Contents (deb) Get:5 file:/var/cache/openmediavault/archives Contents (deb) Ign:5 file:/var/cache/openmediavault/archives Contents (deb) Get:3 file:/var/cache/openmediavault/archives Packages Ign:3 file:/var/cache/openmediavault/archives Packages Get:4 file:/var/cache/openmediavault/archives Contents (deb) Ign:4 file:/var/cache/openmediavault/archives Contents (deb) Get:5 file:/var/cache/openmediavault/archives Contents (deb) Ign:5 file:/var/cache/openmediavault/archives Contents (deb) Get:3 file:/var/cache/openmediavault/archives Packages Ign:3 file:/var/cache/openmediavault/archives Packages Get:4 file:/var/cache/openmediavault/archives Contents (deb) Ign:4 file:/var/cache/openmediavault/archives Contents (deb) Get:5 file:/var/cache/openmediavault/archives Contents (deb) Ign:5 file:/var/cache/openmediavault/archives Contents (deb) Get:3 file:/var/cache/openmediavault/archives Packages Ign:3 file:/var/cache/openmediavault/archives Packages Get:4 file:/var/cache/openmediavault/archives Contents (deb) Ign:4 file:/var/cache/openmediavault/archives Contents (deb) Get:5 file:/var/cache/openmediavault/archives Contents (deb) Ign:5 file:/var/cache/openmediavault/archives Contents (deb) Get:3 file:/var/cache/openmediavault/archives Packages Ign:3 file:/var/cache/openmediavault/archives Packages Get:4 file:/var/cache/openmediavault/archives Contents (deb) Ign:4 file:/var/cache/openmediavault/archives Contents (deb) Get:5 file:/var/cache/openmediavault/archives Contents (deb) Ign:5 file:/var/cache/openmediavault/archives Contents (deb) Get:3 file:/var/cache/openmediavault/archives Packages Get:4 file:/var/cache/openmediavault/archives Contents (deb) Ign:4 file:/var/cache/openmediavault/archives Contents (deb) Get:5 file:/var/cache/openmediavault/archives Contents (deb) Ign:5 file:/var/cache/openmediavault/archives Contents (deb) Hit:6 http://deb.debian.org/debian bullseye InRelease Hit:7 http://deb.debian.org/debian bullseye-updates InRelease Get:8 http://security.debian.org bullseye-security InRelease [48.4 kB] Hit:9 http://packages.openmediavault.org/public shaitan InRelease Hit:10 https://download.docker.com/linux/debian bullseye InRelease Hit:11 https://openmediavault-plugin-developers.github.io/packages/debian shaitan InRelease Hit:13 https://openmediavault.github.io/packages shaitan InRelease Hit:12 http://mirrors.tuna.tsinghua.edu.cn/armbian bullseye InRelease Get:14 http://security.debian.org/debian-security bullseye-security InRelease [48.4 kB] Hit:15 http://httpredir.debian.org/debian bullseye-backports InRelease Fetched 96.7 kB in 7s (13.3 kB/s) Reading package lists...

Reading package lists...

Building dependency tree...

Reading state information...

The following additional packages will be installed: containerd.io docker-ce-cli Suggested packages: cgroupfs-mount | cgroup-lite Recommended packages: apparmor docker-ce-rootless-extras libltdl7 pigz docker-buildx-plugin The following NEW packages will be installed: containerd.io docker-ce docker-ce-cli docker-compose-plugin 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 55.4 MB of archives. After this operation, 235 MB of additional disk space will be used. Get:1 https://download.docker.com/linux/debian bullseye/stable armhf containerd.io armhf 1.6.18-1 [20.7 MB] Get:2 https://download.docker.com/linux/debian bullseye/stable armhf docker-ce-cli armhf 5:23.0.1-1~debian.11~bullseye [12.0 MB] Get:3 https://download.docker.com/linux/debian bullseye/stable armhf docker-ce armhf 5:23.0.1-1~debian.11~bullseye [13.9 MB] Get:4 https://download.docker.com/linux/debian bullseye/stable armhf docker-compose-plugin armhf 2.16.0-1~debian.11~bullseye [8738 kB] Fetched 55.4 MB in 13s (4286 kB/s) Selecting previously unselected package containerd.io. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 48067 files and directories currently installed.) Preparing to unpack .../containerd.io_1.6.18-1_armhf.deb ... Unpacking containerd.io (1.6.18-1) ... Selecting previously unselected package docker-ce-cli. Preparing to unpack .../docker-ce-cli_5%3a23.0.1-1~debian.11~bullseye_armhf.deb ... Unpacking docker-ce-cli (5:23.0.1-1~debian.11~bullseye) ... Selecting previously unselected package docker-ce. Preparing to unpack .../docker-ce_5%3a23.0.1-1~debian.11~bullseye_armhf.deb ... Unpacking docker-ce (5:23.0.1-1~debian.11~bullseye) ... Selecting previously unselected package docker-compose-plugin. Preparing to unpack .../docker-compose-plugin_2.16.0-1~debian.11~bullseye_armhf.deb ... Unpacking docker-compose-plugin (2.16.0-1~debian.11~bullseye) ... Setting up containerd.io (1.6.18-1) ... Created symlink /etc/systemd/system/multi-user.target.wants/containerd.service → /lib/systemd/system/containerd.service. Setting up docker-compose-plugin (2.16.0-1~debian.11~bullseye) ... Setting up docker-ce-cli (5:23.0.1-1~debian.11~bullseye) ... Setting up docker-ce (5:23.0.1-1~debian.11~bullseye) ... Created symlink /etc/systemd/system/multi-user.target.wants/docker.service → /lib/systemd/system/docker.service. Created symlink /etc/systemd/system/sockets.target.wants/docker.socket → /lib/systemd/system/docker.socket. Job for docker.service failed because the control process exited with error code. See "systemctl status docker.service" and "journalctl -xe" for details. invoke-rc.d: initscript docker, action "start" failed. ● docker.service - Docker Application Container Engine Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled) Drop-In: /etc/systemd/system/docker.service.d └─waitAllMounts.conf Active: activating (auto-restart) (Result: exit-code) since Sun 2023-03-12 21:29:10 CST; 37ms ago TriggeredBy: ● docker.socket Docs: https://docs.docker.com Process: 15309 ExecStart=/usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock (code=exited, status=1/FAILURE) Main PID: 15309 (code=exited, status=1/FAILURE) CPU: 836ms dpkg: error processing package docker-ce (--configure): installed docker-ce package post-installation script subprocess returned error exit status 1 Processing triggers for man-db (2.9.4-2) ... Errors were encountered while processing: docker-ce Failed to install docker. Try fixing install... Reading package lists...

Building dependency tree...

Reading state information...

0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up docker-ce (5:23.0.1-1~debian.11~bullseye) ... Job for docker.service failed because the control process exited with error code. See "systemctl status docker.service" and "journalctl -xe" for details. invoke-rc.d: initscript docker, action "start" failed. ● docker.service - Docker Application Container Engine Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled) Drop-In: /etc/systemd/system/docker.service.d └─waitAllMounts.conf Active: activating (auto-restart) (Result: exit-code) since Sun 2023-03-12 21:30:04 CST; 39ms ago TriggeredBy: ● docker.socket Docs: https://docs.docker.com Process: 16637 ExecStart=/usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock (code=exited, status=1/FAILURE) Main PID: 16637 (code=exited, status=1/FAILURE) CPU: 775ms dpkg: error processing package docker-ce (--configure): installed docker-ce package post-installation script subprocess returned error exit status 1 Errors were encountered while processing: docker-ce Unable to fix docker install. in /usr/share/openmediavault/engined/rpc/omvextras.inc:296 Stack trace:

0 /usr/share/php/openmediavault/rpc/serviceabstract.inc(619): OMVRpcServiceOmvExtras->{closure}('/tmp/bgstatusqA...', '/tmp/bgoutputNO...')

1 /usr/share/openmediavault/engined/rpc/omvextras.inc(298): OMV\Rpc\ServiceAbstract->execBgProc(Object(Closure))

2 [internal function]: OMVRpcServiceOmvExtras->doCommand(Array, Array)

3 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array)

4 /usr/share/php/openmediavault/rpc/rpc.inc(86): OMV\Rpc\ServiceAbstract->callMethod('doCommand', Array, Array)

5 /usr/sbin/omv-engined(537): OMV\Rpc\Rpc::call('OmvExtras', 'doCommand', Array, Array, 1)

6 {main}

[chenychong]

安装docker 失败 怎么解决？

[getr00t]

安装docker 失败 怎么解决？

不会吧，你的报错信息是啥？我的安装是成功的