DIR-3040 WiFi Setting

[leandrotsampa]

Hi @i3roly, how are you?

After some tests, device is working good, I get some problens like freeze or device say "not have internet" but I will try get dmesg log if this occur again.

For now, you know how set Wireless Rate?

When Rate is 1734 Mbit/s all works very good and 5G works in all my house using my Xiaomi Mi 8 Pro with 866mb wireless speed without changes. And sometimes and I not know why but the Rate is Auto and my Xiaomi Mi 8 Pro only get 866mb when is close to the router.

Very thanks for all friend ;D

[i3roly]

Need logs man.

Try to get them before any freeze. Not sure why it would freeze...

Also not sure about the 'not have internet' part either. You're going to need to give me logs.

Could be an isolated incident.

I'm not sure about the rate thing. I know sometimes it says auto but I didn't test that too much.

Wireless rate is determine by channel width and frequency.

From: Leandro Sent: Saturday, 26 February 2022 12:27 PM To: i3roly/glibc_ddwrt Reply To: i3roly/glibc_ddwrt Cc: gagan sidhu; Mention Subject: [i3roly/glibc_ddwrt] DIR-3040 WiFi Setting (Issue #11)

Hi @i3rolyhttps://github.com/i3roly, how are you?

After some tests, device is working good, I get some problens like freeze or device say "not have internet" but I will try get dmesg log if this occur again.

For now, you know how set Wireless Rate? [https://camo.githubusercontent.com/d52b108d72ab31e870e6d26099f6ba1efc21af88156150f46891b0ddff677f3b/68747470733a2f2f692e6962622e636f2f58576668314b362f576972656c6573732d526174652e706e67]https://camo.githubusercontent.com/d52b108d72ab31e870e6d26099f6ba1efc21af88156150f46891b0ddff677f3b/68747470733a2f2f692e6962622e636f2f58576668314b362f576972656c6573732d526174652e706e67

When Rate is 1734 Mbit/s all works very good and 5G works in all my house using my Xiaomi Mi 8 Pro with 866mb wireless speed without changes. And sometimes and I not know why but the Rate is Auto and my Xiaomi Mi 8 Pro only get 866mb when is close to the router.

Very thanks for all friend ;D

— Reply to this email directly, view it on GitHubhttps://github.com/i3roly/glibc_ddwrt/issues/11, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AITLEG3ZXW2ERWXII6HODF3U5ESRJANCNFSM5PNPB77Q. Triage notifications on the go with GitHub Mobile for iOShttps://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Androidhttps://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub. You are receiving this because you were mentioned.Message ID: @.***>

[leandrotsampa]

About Rate I will try set frequency manually to check. About freeze I will try get log if freeze again.

But for now I get again the problem of "not have internet". I checked my WAN and is in DHCP Mode and when I click in DHCP Renew I get this output:

When I restart DIR-3040 all is OK again:

[i3roly]

Lol that has nothing to do with my build but probably your dns settings. I'm no dns pro and I don't use that, but it seems to me that there may be issues using a foreign dns provider sometimes. I have never had that issue

From: Leandro Sent: Saturday, 26 February 2022 1:34 PM To: i3roly/glibc_ddwrt Reply To: i3roly/glibc_ddwrt Cc: gagan sidhu; Mention Subject: Re: [i3roly/glibc_ddwrt] DIR-3040 WiFi Setting (Issue #11)

About Rate I will try set frequency manually to check. About freeze I will try get log if freeze again.

But for now I get again the problem of "not have internet". I checked my WAN and is in DHCP Mode and when I click in DHCP Renew I get this output:

[https://camo.githubusercontent.com/fb1e959b91b56603f9f53cea766a4b202bd203e1cd2026b5134c6dcd1833a9f5/68747470733a2f2f692e6962622e636f2f784d57637754382f696d6167652e706e67]https://camo.githubusercontent.com/fb1e959b91b56603f9f53cea766a4b202bd203e1cd2026b5134c6dcd1833a9f5/68747470733a2f2f692e6962622e636f2f784d57637754382f696d6167652e706e67

When I restart DIR-3040 all is OK again: [https://camo.githubusercontent.com/abf2b26f786ac8ce1c936b5db42661288623e3379dbae9578fb977f59b02a9cd/68747470733a2f2f692e6962622e636f2f465743304a5a522f696d6167652e706e67]https://camo.githubusercontent.com/abf2b26f786ac8ce1c936b5db42661288623e3379dbae9578fb977f59b02a9cd/68747470733a2f2f692e6962622e636f2f465743304a5a522f696d6167652e706e67

— Reply to this email directly, view it on GitHubhttps://github.com/i3roly/glibc_ddwrt/issues/11#issuecomment-1052577124, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AITLEG3HQLBXP3R4WEP55R3U5E2NXANCNFSM5PNPB77Q. Triage notifications on the go with GitHub Mobile for iOShttps://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Androidhttps://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub. You are receiving this because you were mentioned.Message ID: @.***>

[leandrotsampa]

Hmmm but the problem not is internet or DNS. I'm using DIR-3040 connected by WAN to my primary router, so the WAN IP received it's internal on my network. DIR-3040 is losing functionality in WAN port.

[i3roly]

Like I said I'm not a network pro BUT you're using a foreign dns on your internal network from one router to another. I am certain it's not the build. I haven't touched anything in ddwrt related to this stuff...

From: Leandro Sent: Saturday, 26 February 2022 1:40 PM To: i3roly/glibc_ddwrt Reply To: i3roly/glibc_ddwrt Cc: gagan sidhu; Mention Subject: Re: [i3roly/glibc_ddwrt] DIR-3040 WiFi Setting (Issue #11)

Hmmm but the problem not is internet or DNS. I'm using DIR-3040 connected by WAN to my primary router, so the WAN IP received it's internal on my network. DIR-3040 is losing functionality in WAN port.

— Reply to this email directly, view it on GitHubhttps://github.com/i3roly/glibc_ddwrt/issues/11#issuecomment-1052584568, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AITLEGY3JPJGSJ42UVOBKWLU5E3FJANCNFSM5PNPB77Q. Triage notifications on the go with GitHub Mobile for iOShttps://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Androidhttps://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub. You are receiving this because you were mentioned.Message ID: @.***>

[i3roly]

From what you're showing it seems the problem is the lease isn't renewing. I have no idea why. The only reason I can think of is dns settings.

On my normal setup I'd notice this because I'd have no Internet. It has to be something to do with the two router setup. Did stock Fw work fine? If so, even less ideas haha

From: Gagan Sidhu Sent: Saturday, 26 February 2022 1:44 PM To: Leandro Subject: Re: [i3roly/glibc_ddwrt] DIR-3040 WiFi Setting (Issue #11)

Like I said I'm not a network pro BUT you're using a foreign dns on your internal network from one router to another. I am certain it's not the build. I haven't touched anything in ddwrt related to this stuff...

From: Leandro Sent: Saturday, 26 February 2022 1:40 PM To: i3roly/glibc_ddwrt Reply To: i3roly/glibc_ddwrt Cc: gagan sidhu; Mention Subject: Re: [i3roly/glibc_ddwrt] DIR-3040 WiFi Setting (Issue #11)

Hmmm but the problem not is internet or DNS. I'm using DIR-3040 connected by WAN to my primary router, so the WAN IP received it's internal on my network. DIR-3040 is losing functionality in WAN port.

— Reply to this email directly, view it on GitHubhttps://github.com/i3roly/glibc_ddwrt/issues/11#issuecomment-1052584568, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AITLEGY3JPJGSJ42UVOBKWLU5E3FJANCNFSM5PNPB77Q. Triage notifications on the go with GitHub Mobile for iOShttps://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Androidhttps://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub. You are receiving this because you were mentioned.Message ID: @.***>

[leandrotsampa]

Yes, stock is OK I'm use as the same way before change and used a mikrotik too as the same way. When problem not occurs, the DHCP Release and DHCP Renew works 100% on WAN using this config. I never see this problem too.

[i3roly]

that lease time looks wrong though

with my WAN connected to the modem, i am always getting a lease time.

sounds to me you need to configure or figure out why that lease time is zero. it should never be zero because that's when it should be renewed.

i bet the stock fw did something to address this. you're the first person to report this problem.

[i3roly]

also, is your dhcp start configured to 3? i think by default the dhcp start value is much higher (64?)

[leandrotsampa]

No, my DHCP on router internet start from 2, but I'm using mikrotik on 2. My planing is replace mikrotik by dir-3040. About release time probably is because in internet router i marked this dir-3040 to not change IP.

Normally people use provider router as bridge and the private router as a WAN - PPPoE. In my cause I only put in provider router my internal router in DMZ mode.

[leandrotsampa]

I think i found the problem. I get the same problem, so I find, copy command line and kill udhcpc. After that I run again udhcpc with the command line and WAN back to work.

The problem now is know why stoped working and how fix.

[i3roly]

it may have to do with syntax differences in the bash script /etc/cidrroute.sh between busybox and glibc-based bash, but i cna't say for sure.

but i do know this file is called when it moves from an unbound to a bound state. try to play with that script and let me know, because it is probably the only possible issue.

[leandrotsampa]

Thanks I will try. I noted that when remove WAN cable the DD-WRT no detect or not update status :D

You have command to disable LED? I want create a CRON tab to disable LED after 1h

[i3roly]

no, it only turns off if you turn off the radios. you can turn of all 3 radios by holding the button at the front.

i am not going to add that feature either, lol. sorry

[leandrotsampa]

Hi @i3roly, I still have problem with WAN Port :/ I already know the port and cable is OK. I tested WAN with Static IP and after a while stops too, no error no log and DD-WRT show IP like nothing have changed and it's the same when WAN in in DHCP Mode.

I noticed that the WAN port is as vlan2, can you activate the Setup - VLANs in DD-WRT? Very thanks

[i3roly]

Not possible for it to be the WAN in DHCP Mode. I'm using wan in DHCP Mode and i'm fine. You really don't think someone else wouldn't have opened a ticket about this by now? Sorry dude you may be best off going back to stock.

From: Leandro Sent: Sunday, 27 February 2022 5:53 PM To: i3roly/glibc_ddwrt Reply To: i3roly/glibc_ddwrt Cc: gagan sidhu; Mention Subject: Re: [i3roly/glibc_ddwrt] DIR-3040 WiFi Setting (Issue #11)

Hi @i3rolyhttps://github.com/i3roly, I still have problem with WAN Port :/ I already know the port and cable is OK. I tested WAN with Static IP and after a while stops too, no error no log and DD-WRT show IP like nothing have changed and it's the same when WAN in in DHCP Mode.

I noticed that the WAN port is as vlan2, can you activate the Setup - VLANs in DD-WRT? Very thanks

— Reply to this email directly, view it on GitHubhttps://github.com/i3roly/glibc_ddwrt/issues/11#issuecomment-1053750555, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AITLEG63TTTJYK4VLSTEQR3U5LBPDANCNFSM5PNPB77Q. Triage notifications on the go with GitHub Mobile for iOShttps://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Androidhttps://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub. You are receiving this because you were mentioned.Message ID: @.***>

[leandrotsampa]

Ok, but you can enable Setup -VLANs? For now I changed WAN to eth3 to test.

[i3roly]

No because VLANs aren't setup like that.

You need to use the switch program to configure your vlan ports and then add this interface using vconfig.

The stock firmware is the same way but may let you configure them. I don't care about this feature enough to write the httpd code necessary.

From: Leandro Sent: Sunday, 27 February 2022 6:00 PM To: i3roly/glibc_ddwrt Reply To: i3roly/glibc_ddwrt Cc: gagan sidhu; Mention Subject: Re: [i3roly/glibc_ddwrt] DIR-3040 WiFi Setting (Issue #11)

Ok, but you can enable Setup -VLANs?

— Reply to this email directly, view it on GitHubhttps://github.com/i3roly/glibc_ddwrt/issues/11#issuecomment-1053754280, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AITLEG6G5YUB6FW7UKCFXW3U5LCLPANCNFSM5PNPB77Q. Triage notifications on the go with GitHub Mobile for iOShttps://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Androidhttps://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub. You are receiving this because you were mentioned.Message ID: @.***>