search

iBabajan / tomato-sdhc-vlan

Automatically exported from code.google.com/p/tomato-sdhc-vlan
0 stars 0 forks source link

(LinksysE3000)"Basic-Network" webgui page cannot save after setup a guest ssid. #18

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
----Issue----------------------------------------------------------------------
The page "Basic - Network" is totally messed up after I setup a guest 
work(multissid).

I just want the guest network and primary SSID work in the same lan, so I setup 
the VIF with Bridged to "LAN (br0)"

then everything works perfect but I cannot make any changes in "Basic - 
Network" page. because the save button is not work anymore after that, and 
something weird show up in the page like I'm using a wired pppoe WAN but 3G 
module settings is also showed in the page. and also the page "Advanced - 
Virtual wireless - overview" is not work. settings are gone(after click to 
show) and save button not works.

I tried to change many different broswers, like Firefox, chrome, IE, the 
problem still there.
-------------------------------------------------------------------------------

----Info-----------------------------------------------------------------------
Router: Linksys-Cisco E3000 V1
Firmware: Tomato Firmware v1.28.2023 MIPSR2Teaman-RT-VLAN-PPTPD K26 USB 
VPN-NOCAT
--------------------------------------------------------------------------------

-------------------------------------------------------------------------------
I would like to is that a common issue? or only me got this?

Thank you.
-------------------------------------------------------------------------------

Original issue reported on code.google.com by ssot...@gmail.com on 10 Apr 2012 at 6:20

GoogleCodeExporter commented 8 years ago 
I assume you already tried the steps on this wiki page, right?
http://code.google.com/p/tomato-sdhc-vlan/wiki/MultiSSIDHOWTOForE3000

Also, it's *very* important to start the whole thing by erasing all data in 
NVRAM/memory and begin configuring the router from scratch/bare NVRAM 
defaults... this simple step could help quite a bit in troubleshooting any 
issues (i.e. identify any/all steps or sequence of command to reproduce any 
issues encountered).

Thanks!

Original comment by augu...@bott.com.br on 16 Apr 2012 at 10:21

GoogleCodeExporter commented 8 years ago 
Yes, I did erase NVRAM twice when before and after flashing the router.

the only thing i didn't follow the wiki is I didn't add a VLAN "br1", beacuse I 
hope all the wireless part including guest virtual ssid works in the same vlan 
"br0".

I'll be in strict accordance with the wiki's vlan part to check it out.

Thank you.

Original comment by ssot...@gmail.com on 23 Apr 2012 at 9:03

GoogleCodeExporter commented 8 years ago 
A problem with the 'order' of interface names on NVRAM some vars has been 
identified and being worked on. For details and a possible work-around, have a 
look at this thread/post:

http://www.linksysinfo.org/index.php?threads/tomato-multissid.36697/page-3#post-
182740

Original comment by augu...@bott.com.br on 3 May 2012 at 7:32

GoogleCodeExporter commented 8 years ago 
Fixed on Teaman-RT v2025.

Original comment by augu...@bott.com.br on 15 Jun 2012 at 7:09