Hey hey,
I run the generated gcode on my Snapmaker J1 with dual head. Normaly there is no need for a real dual head because both heads had the same hardware. But I see that the printer is heating the 2nd head (right).
So I suggest to set M109 T1 S200 or better to choose the HotEnd.
Hey hey, I run the generated gcode on my Snapmaker J1 with dual head. Normaly there is no need for a real dual head because both heads had the same hardware. But I see that the printer is heating the 2nd head (right). So I suggest to set
M109 T1 S200
or better to choose the HotEnd.