search

iMicknl / LoctekMotion_IoT

Learn how to connect your Flexispot (LoctekMotion) desk to the internet. This repository contains a collection of scripts to get your started, combined with research and instructions.
MIT License
625 stars 61 forks source link

CB28M1B-1 - up/down switches not working #19

Open marcelfischer opened 2 years ago

marcelfischer commented 2 years ago

Hi all, my controller box is a CB28M1B-1 with a HS01B-1 keypad. I disconnected the keypad and connected an ESP8266 as described with esphome. Preset 1-3 and wakeup is working fine. But with up and down nothing happens. Is there any way to debug this?

Many thanks for this awesome work!

marcelfischer commented 2 years ago

Ah sorry, those up and down switches were set to internal. I remove that, now its working

iMicknl commented 2 years ago

You should see a cover with up/down buttons, hence why you don't see the switches. On Discord I shared a newer config with button support as well, however I didn't had time yet to add it to the repo.

marcelfischer commented 2 years ago

Im not really into Discord. But I will check it. Or are you able to post it here?

iMicknl commented 2 years ago

https://gist.github.com/iMicknl/2890d738ede31947b81fb33b8951c242

larc-firefly commented 1 year ago

I have a standing desk with CB28M1S-1 controller, the up button stopped working. It required a reset. The reset was simple, press the lowering button until the desk hits rock bottom, hold it until the motor stops then try’s to raise slightly automatically. The reset is now complete and the up button should work again.

justspacedog commented 5 months ago

@marcelfischer Could you please provide the pinout for your setup? :)

xdasx commented 1 week ago

@larc-firefly are you using CB28M1S-1 with esp? memory functions working also? could you share your config?